Preparation and characterization of new photoactive polyamides containing 4‐(4‐dimethylaminophenyl)urazole units

4‐(4‐dimethylaminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( DAPTD ) was prepared from 4‐dimethylaminobenzoic acid in five steps. The compound DAPTD was reacted with excess acetyl chloride in N,N‐dimethylacetamide (DMAc) solution and gave 1,2‐bisacetyl‐4‐[4‐(dimethylaminophenyl)]‐1,2,4‐triazolidine‐3,5‐dione as a model compound. Solution polycondensation reactions of monomer with succinyl chloride (SucC), suberoyl chloride (SubC), and sebacoyl chloride (SebC) were performed under conventional solution polymerization techniques in the presence of triethylamine and pyridine as a catalyst in N‐methylpyrrolidone (NMP) and led to the formation of novel aliphatic polyamides. These novel polyamides have inherent viscosities in the range of 0.09–0.21 dL/g in N,N‐dimethylformamide (DMF) at 25°C. Fluorimetric studies of the model compound as well as polymers were performed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 947–954, 2007     

Synthesis of Photoactive Polyureas Derived from 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione and Diisocyanates

Summary 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione (DAPTD) was prepared from 4-dimethylaminobenzoic acid in five steps. The reaction of monomer DAPTD with n-isopropylisocyanate was performed at room temperature in N,N-dimethylacetamide (DMAc) solution and the resulting bis-urea derivative was obtained in high yield and was finally used as a model compound for polymerization reaction. The step-growth polymerization reactions of monomer with hexamethylene diisocyanate (HMDI), isophorone diisocyanate (IPDI) and toluene-2,4-diisocyanate (TDI) were performed in DMAc solution in the presence of pyridine, triethylamine or dibutyltin dilurate as catalysts. Some physical properties and structural characterization of these novel polyureas are reported. Fluorimetric studies of the model compound as well as polymers were performed.     

An enumeration algorithm for integer‐valued data envelopment analysis

Data envelopment analysis (DEA) models assume real‐valued inputs and outputs, but on many occasions, some inputs and/or outputs can only take integer values. In these cases, using DEA models can result in misleading efficiency assessments and inaccurate performance targets. In this paper, we propose an enumeration algorithm for computing efficiency scores and performance targets of decision‐making units with integer value inputs/outputs. In the presented algorithm, we do not use any of the mixed integer linear programming (MILP) models that are used in previous studies. We show that the result of our algorithm and that of the MILP model presented in this context is the same. We also generalize our algorithm for different types of returns to scale as well as for the hybrid setting with real‐valued data.     

Prediction of carbon dioxide separation from gas mixtures in petroleum industries using the Levenberg–Marquardt algorithm

In this study, two mathematical models for hydrate formation process to separate carbon dioxide by a combination of two different kinds of organic and surfactant promoters are presented. Promoters such as sodium dodecyl sulfate, sodium dodecyl benzene sulfonate, and dodecyl trimethyl ammonium chloride as surfactant promoters; also, tetrahydrofuran, cyclopentane, 1,3-dioxolane, and 2-methyl tetrahydrofuran as organic promoters have been used in recent years. The results showed that a combination of 3000 ppm of surfactant promoters and 4 wt% organic promoters had the highest separation rate of carbon dioxide and; consequently, the investigated models were based on this optimum condition. As a matter of fact, by using these simulations the hydrate formation behavior was predicted with high accuracy; moreover, conducting consuming experiments is not essential anymore. To sum up, in the present research both Vandermonde matrix model and Levenberg-Marquardt algorithm were applied to predict the hydrate formation behavior; in addition, their results were precisely considered and validated with experimental data.     

Broadband absorption enhancement in hole-transport- layer-free perovskite solar cell by grating structure

Recently, the hole transport layer-free planar perovskite solar cells(HTL-free PSCs) have attracted intense attention. However, the poor absorption of light in the wavelengths longer than 800 nm is an important challenge in all configurations of PSCs. In this study, the HTL-free PSC with a gold rectangular grating at back contact is proposed. In order to improve the performance of the solar cell, effects of grating dimensions and periodicity on the absorption of the active layer are numerically ...     

Energy inputs and crop yield relationship in potato production in Hamadan province of Iran

The aim of this study was to determine energy consumption and the relationship between energy input and yield for potato production in Kaboud Rahang region of Hamadan state. The data used in this study are collected by questionnaire. The results revealed that nitrogen fertilizer (39%), diesel (21%), seed (14.9%), water (7.5%) and manure (6.4%) consumed the bulk of energy. In the surveyed farms, average yield and energy consumption were calculated as around 28613.7 kg/ha, 92296.3 MJ/ha, respectively. The results also showed that energy ratio, specific energy and energy productivity were 1.1, 3.2 MJ/kg and 0.3 kg/MJ, respectively. An econometric model was developed to estimate the impact of energy inputs on yield by using parametric methods. For this purpose, potato yield, an endogenous variable was assumed to be a function of energy inputs: fertilizer manure, chemical, machinery, human, water for irrigation, diesel and seed. The empirical results indicated that variables: fertilizer, chemical, seed and human were found statistically significant and contributed to yield. Among statistically significant exogenous variables, seed, water for irrigation, chemical, human and fertilizer were ranked in terms of elasticities.     

Effect of Doping of Zn and Ca into ErBa2Cu3O7?δ Superconductor Prepared via Co-precipitation Method

Zn- and Ca-doped ErBa₂Cu₃O_7−δ were successfully prepared via coprecipitation method using metal acetates as the starting salts. The precipitated samples were calcined for 20 h at 900 °C and sintered at 920 °C for 24 h. All heat treatments were carried out under oxygen environment. Results show that there is a selectivity of the doping site depending on the ionic radius of the dopant. Furthermore, increase in the critical temperature, T _c , was observed in 0.05 mole of calcium and zinc doped samples. The difference in ionic radius of the dopant led to the increase in porosity as the ionic radius decreases. On the other hand, structural distortion increased as the difference of ionic radius became larger.     

Mechanistic study of electrochemical oxidation of 4-tert-butylcatechol: A facile electrochemical method for the synthesis of new trimer of 4-tert-butylcatechol

The electrochemical trimerization of 4-tert-butylcatechol via anodic oxidation of 4-tert-butylcatechol (1) is described. The mechanism of trimerization has been studied in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The electrochemical synthesis of trimer 3a has been successfully performed in an undivided cell in good yield and purity.     

Optimal Linear Control of Modular Multi-Level Converters with a Prescribed Degree of Stability

Abstract

In this paper, a new control approach using an optimal linear control with prescribed degree of stability for modular multi-level converters (MMC) is presented and analyzed. The proposed controller relies on a linear quadratic regulator with integral action which brings the ability of state variable reference tracking for modular multi-level converters. Since MMC is a complex system with several state variables, a unified control system design for this system is vital. The proposed controller of this study is designed to obtain wider stability margin thanks to the implementation of prescribed degree of stability concept to minimize the quadratic performance index of the control structure. By means of this method, the poles of the closed-loop system will be shifted to the desired places in the left half side of the S-plane. The main advantages of this control strategy compared to previous methods are that it will be possible to control the state of energy for each phase separately, while there will be superior tolerance to nonlinearities and the enhanced stability margin with less sensitivity to plant-parameter variations. The performance of the designed controller is verified through MATLAB^TM simulations (The MathWorks, Natick, MA, USA) with the nonlinear model of MMC.     

4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure,Programming, and Shape Memory Performance

In this research, polyvinyl chloride (PVC) with excellent shape-memory effects is 4D printed via fused deposition modeling (FDM) technology. An experimental procedure for successful 3D printing of lab-made filament from PVC granules is introduced. Macro- and microstructural features of 3D printed PVC are investigated by means of wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) techniques. A promising shape-memory feature of PVC is hypothesized from the presence of small close imperfect thermodynamically stable crystallites as physical crosslinks, which are further reinforced by mesomorphs and possibly molecular entanglement. A detailed analysis of shape fixity and shape recovery performance of 3D printed PVC is carried out considering three programming scenarios of cold (T_g −45 °C), warm (T_g −15 °C), and hot (T_g +15 °C) and two load holding times of 0 s, and 600 s under three-point bending and compression modes. Extensive insightful discussions are presented, and in conclusion, shape-memory effects are promising,ranging from 83.24% to 100%. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state-of-the-art shape-memory materials library for 4D printing, and provide pertinent results that are instrumental in the 3D printing of shape-memory PVC-based structures.