Overview of underground coal gasification operations at Chinchilla,Australia

Underground coal gasification (UCG) is a process which converts deep, un-mineable or difficult to mine coal resources into syngas which can then be converted into valuable end products such as electric power, liquid fuels, synthetic natural gas and chemicals. This paper provides a summary of the UCG operations conducted at the Chinchilla Demonstration Facility in Australia, focusing on gasifiers constructed using directional drilling. A number of the experiences and key lessons learned from operating multiple underground gasifiers over several years at the facility are described. Implications for the implementation in commercial projects using UCG are also discussed. Finally, the potential of UCG as a method for producing syngas from deep coal is discussed and some of the challenges and opportunities are summarized.     

Effect of gate length in InAs/AlSb HEMTs biased for low power or high gain

The effect of gate-length variation on DC and RF performance of InAs/AlSb HEMTs, biased for low DC power consumption or high gain, is reported. Simultaneously fabricated devices, with gate lengths between 225 nm and 335 nm, have been compared. DC measurements revealed higher output conductance g_ds and slightly increased impact ionization with reduced gate length. When reducing the gate length from 335 nm to 225 nm, the DC power consumption was reduced by approximately 80% at an f_T of 120 GHz. Furthermore, a 225 nm gate-length HEMT biased for high gain exhibited an extrinsic f_T of 165 GHz and an extrinsic f_max of 115 GHz, at a DC power consumption of 100 mW/mm. When biased for low DC power consumption of 20 mW/mm the same HEMT exhibited an extrinsic f_T and f_max of 120 GHz and 110 GHz, respectively.     

Evidence of surface charge effects in T-branch nanojunctions using microsecond-pulse testing

The understanding of the influence of surface charge effects on the electrical properties of nanostructures is a key aspect for the forthcoming generations of electronic devices. In this paper, by using an ultrafast electrical pulse characterization technique, we report on the room-temperature time response of a T-branch nanojunction which allows us to identify the signature of surface states. Different pulse widths from 500 ns to 100 μs were applied to the device. For a given pulse width, the stem voltage is measured and compared with the DC result. The output value in the stem is found to depend on the pulse width and to be related to the characteristic charging time of the interface states. As expected, the results show that the well-known nonlinear response of T-branch junctions is more pronounced for long pulses, beyond such a characteristic time.     

Ballistic nano-devices for high frequency applications

In this paper, we present a study on three-terminal ballistic junction and their applications to rectifiers and MUX/DEMUX. Rectifying effect is observed up to 94 GHz at room temperature. Although THz frequency performance has been demonstrated by Monte Carlo simulation, the high impedance of the nano-device combined with the parasitic capacitances is a limiting factor.     

Gastric versus duodenal feeding and gastric tonometric measurements

OBJECTIVE: To compare the influence of gastric and postpyloric enteral feeding on the gastric tonometric PCO2 gap (tonometric PCO2 - PaCO2). DESIGN: A prospective, clinical trial. SETTING: Two intensive care units in a university hospital. PATIENTS: Twenty patients undergoing mechanical ventilation and enteral feeding without catecholamines, sepsis, or sign of hypoxia. INTERVENTIONS: Patients were randomized to receive feeding through the tonometer (gastric group), or through a postpyloric tube (postpyloric group). MEASUREMENTS AND MAIN RESULTS: The patients received tube feeding at a rate of 50 mL/hr during 4 hrs. Baseline measurements included: mean arterial pressure, heart rate, tonometric parameters, arterial gases, and arterial lactate concentration. Except for lactate concentration, these measurements were repeated after 1 and 4 hrs of enteral feeding and 2 hrs after stopping enteral feeding. During the study, arterial pH and PaCO2 did not change. During enteral feeding, the PCO2 gap increased in the gastric group from a mean of 7+/-5 to 17+/-14 (SD) torr (0.9 0.7 to 2.3+/-1.9 kPa) (p< .O01) and did not change in the postpyloric group (5+/-5 to 3+/-1 torr [0.7+/-0.7 to 0.4+/-0.1 kPa]). Two hours after stopping enteral feeding, the PCO2 gap was still increased in the gastric group (15+/-9 vs. 7+/-5 torr [2.0+/-1.2 vs. 0.9+/-0.7 kPa]) (p < .01). CONCLUSION: The results indicate that gastric enteral feeding increased the PCO2 gap. However, postpyloric enteral feeding does not interact with gastric tonometric measurements and should be used when using gastric tonometry in enterally fed patients.     

What’s the middle ground? Institutionalized vs. emerging water-related stakeholder engagement processes

Abstract

In this day and age, it is widely argued that stakeholder engagement in water-related decision-making processes yields many benefits, including legitimacy, acceptance and trust. Key legal frameworks, such as the European Water Framework Directive and the Aarhus Convention, have spurred the emergence of formal forms of stakeholder engagement. On the other hand, many engagement processes are spontaneous and self-organized. This article investigates the strategies used in formal (government-led) and informal (bottom-up) engagement processes in search of a middle ground. To this end, case studies in the Netherlands, the United States, Uganda and Ethiopia are analyzed using the OECD’s stakeholder engagement checklist. We conclude with reflection on the ways forward to make formal and informal stakeholder engagement complementary.