A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Increasing the photocatalytic and fungicide activities of Ag3PO4 microcrystals under visible-light irradiation

The present study reports for the first time the performance of silver phosphate (Ag₃PO₄) microcrystals as photocatalyst (degradation of Rodamine B-RhB) and antifungal agent (against Candida albicans–C. albicans) under visible-light irradiation (455 nm). Ag₃PO₄ microcrystals were synthesized by a simple co-precipitation (CP) method at room temperature. The structural and electronic properties of the as-synthetized Ag₃PO₄ have been investigated before and after 4 cycles of RhB degradation under visible light using X-ray diffraction (XRD), micro-Raman spectroscopy, UV–Vis spectrophotometer and field emission scanning electron microscopy (FE-SEM) images. The antifungal activity was analyzed in planktonic cells and 48h-biofilm of C. albicans by colony forming units (CFU) counting, confocal laser and FE-SE microscopies. Statistical analysis was carried out using SPSS software. Morphological and structural modifications of Ag₃PO₄ were observed upon recycling. After 4 recycles, the material maintained its photodegradation property; an eightfold increase in the efficiency of Ag₃PO₄ was observed in planktonic cells and a two fold increase in biofilm when irradiated under visible light. Thus, higher antifungal effectiveness against C. albicans was obtained when associated with visible-light irradiation.     

Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

Synthesis and physicochemical characterization of a well-defined poly(butadiene 1,3)-block-poly(dimethylsiloxane) copolymer

For the first time, order-order and order-disorder transitions were detected and characterized in a model diblock copolymer of poly(butadiene-1,3) and poly(dimethylsiloxane) (PB-b-PDMS). This model PB-b-PDMS copolymer was synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene 1,3 (B) and hexamethylciclotrisiloxane (D₃), and subsequently characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size exclusion chromatography (SEC), Fourier Transform infrared spectroscopy (FTIR), Small-Angle X-ray scattering (SAXS) and rheology. SAXS combined with rheological experiments shows that the order-order and order-disorder transitions are thermoreversible. This fact indicates that the copolymer has sufficient mobility at the timescale and at the temperatures of interest to reach their equilibrium morphologies.     

Expansion in bioreactors of human progenitor populations from cord blood and mobilized peripheral blood

Umbilical cord blood (UCB) and mobilized peripheral blood (MPB) provide an alternate source to bone marrow for transplantation. Expansion in vitro of stem/progenitor cell populations from these sources may provide adult-sized grafts otherwise not attainable because of the limited cell numbers available in the case of UCB or because of numerous rounds of apheresis required for sufficient MPB cells. We asked whether continuous perfusion culture could be employed in ex vivo expansion to produce clinically relevant numbers of stem/progenitor cells from these sources. To evaluate MPB, 1-10 million leukocytes, from patients who had received either granulocyte colony-stimulating factor (G-CSF) or cyclophosphamide and granulocyte-macrophage colony-stimulating factor (GM-CSF), were inoculated into bioreactors, with or without irradiated, allogeneic stroma. The growth factor combination in the perfusion medium consisted of interleukin-3 (IL-3), stem cell factor (SCF), GM-CSF and erythropoietin (Epo). Under the best conditions tested, total cell numbers, granulocyte-macrophage colony-forming units (CFU-GM), and long-term culture-initiating cell (LTC-IC) populations were expanded by about 50-, 80-, and 20-fold, respectively, over 14 days. At low cell inocula (1 million), the presence of stroma enhanced the expansion of total cells and CFU-GM but not of LTC-IC. When SCF was not included in the medium, both total cells and CFU-GM expanded to a much lesser extent, but again the expansion of LTC-IC was not affected. At the higher cell inoculum (10 million), expansions of total cells and CFU-GM were equivalent with or without stroma. To evaluate UCB, cells were placed into bioreactors with or without irradiated, allogeneic stroma, and the bioreactors were perfused with medium containing the four standard growth factors. After 6-14 days, in several independent experiments, 20-24 million cells were harvested from bioreactors perfused with SCF-containing medium, irrespective of the presence or absence of preformed stroma. Similarly, in reactors perfused with SCF-containing medium (with or without stroma), an average 40- to 60-fold expansion of CFU-GM was obtained, yielding an average of 1.5-1.8 x 10(5) CFU-GM per reactor. Harvested cells were thus up to 40-fold enriched in CFU-GM in comparison to the inoculum. In the absence of SCF, cell expansions averaged 1.5- to 2-fold, and CFU-GM were expanded only 10- to 14-fold by day 14. As before, the presence of preformed stroma did not affect either cell or CFU-GM yields, provided the cell inoculum was at least 4.5 million cells.(ABSTRACT TRUNCATED AT 400 WORDS)     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

Ultrastructure of the spermatozoa and eggs of the ocean pout (Macrozoarces americanus L.), an internally fertilizing marine fish

Ultrastructure of sperm and eggs of the ocean pout (Macrozoarces americanus L.), an internally fertilizing marine teleost, was examined by scanning and transmission electron microscopy. The results showed that the sperm do not have an acrosome but have a very long mid-piece (one to two times the sperm head length) containing numerous well-developed elongated mitochondria. The sperm also have two tails (is biflagellate) each consisting of nine peripheral and one central pair (9 +/- 2) of microtubules. This long mid-piece and the biflagellate nature of the sperm appear to be associated with the long life-span of the sperm and with sperm dispersal in the ovary to fertilize the eggs internally. The ocean pout eggs are enveloped by a porous chorionic membrane similar to that found in other teleosts but have two micropyles, a condition likely related to a mechanism of egg fertilization which increases the egg fertility in the presence of low sperm numbers. Following insemination, some biochemically undefined excretions appeared on the surface of fertilized eggs and led to the acquisition of adherent capability of the eggs which formed a tightly associated egg mass in sea water.     

Node and element resequencing using the Laplacian of a finite element graph: Part I—General concepts and algorithm

A Finite Element Graph (FEG) is defined here as a nodal graph (G), a dual graph (G*), or a communication graph (G˙) associated with a generic finite element mesh. The Laplacian matrix ( L (G), L (G*) or L (G˙)), used for the study of spectral properties of an FEG, is constructed from usual vertex and edge connectivities of a graph. An automatic algorithm, based on spectral properties of an FEG (G, G* or G˙), is proposed to reorder the nodes and/or elements of the associated finite element mesh. The new algorithm is called Spectral PEG Resequencing (SFR). This algorithm uses global information in the graph, it does not depend on a pseudoperipheral vertex in the resequencing process, and it does not use any kind of level structure of the graph. Moreover, the SFR algorithm is of special advantage in computing environments with vector and parallel processing capabilities. Nodes or elements in the mesh can be reordered depending on the use of an adequate graph representation associated with the mesh. If G is used, then the nodes in the mesh are properly reordered for achieving profile and wavefront reduction of the finite element stiffness matrix. If either G* or G˙ is used, then the elements in the mesh are suitably reordered for a finite element frontai solver, A unified approach involving FEGs and finite element concepts is presented. Conclusions are inferred and possible extensions of this research are pointed out. In Part II of this work,¹ the computational implementation of the SFR algorithm is described and several numerical examples are presented. The examples emphasize important theoretical, numerical and practical aspects of the new resequencing method.