A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Thermal Stability Study of Ultrafine Grained 304L Stainless Steel Produced by Martensitic Process

An ultrafine grain 304L stainless steel with average grain size of about 650 nm was produced by martensitic process. 10 mm as-received sheets were 80% cold rolled in the temperature of ?15 °C and then annealed at 700 °C for 300 min to obtain ultrafine grained microstructure. The results showed that the ultrafine grained 304L steel has yield strength of 720 MPa, tensile strength of about 920 MPa, and total elongation of 47% which is about twice that of coarse grain structure. The effect of annealing temperature (750-900 °C) on the grain growth kinetics was modeled by isothermal kinetics equation which resulted in the grain growth exponent (n) and activation energy for grain growth of 4.8 and 455 KJ/mol, respectively. This activation energy was also compared with those for other austenitic steels to better understanding of the nature of grain growth and atoms mobility during annealing. It was found that activation energy for grain growth is about twice higher than self-diffusion activation energy of austenite that is related to the Zener pinning effects of the second phase particles.     

Action of acrylonitrile on 4-cyano- and 4-carbethoxy pyridazin-3(2H)-ones and their 3-mercapto derivatives. A novel Synthesis of Pyrano and Thiinopyridazines

Reaction of acrylonitrile with 4-cyano-5,6-diphenyl pyridazin-3(2H)-one and 3(2H)-thione derivative ( 1a, b ) at elevated temperature gave 7H-5-amino-6-cyano-3,4-diphenylpyrano and thiino [2,3-c] pyridazines ( 2a, b ), respectively. However, the reaction of 4-carbethoxy pyridazine derivatives ( 1c, d ) with the same reagent, under the same conditions afforded 6H, 7H-6-cyano-3,4-diphenyl-5-oxopyrano ( 3a ) and thiino [2,3-c] pyridazine ( 3b ), respectively. In addition, treatment of ( 1a, c ) and ( 1b, d ) with acrylonitrile ar reflux in alkaline medium give the respective 3-(2′-cyanoethyloxo) ( 7a, c ) and 3-2′-cyanoethylthio ( 7b, d ) pyridazine derivatives. Prolonged alkaline hydrolysis of either ( 1a, c ) or ( 7a, c ) yielded the same product ( 8a ). Also hydrolysis of ( 1b, d ) and ( 7b, d ) afforded one and the same product ( 8b ). The structures of the products were assigned on the basis of satisfactory analytical and spectroscopic data.     

Inhibition of heterocyclic aromatic amine formation in fried ground beef patties by garlic and selected garlic-related sulfur compounds

The effects of garlic and selected organosulfur compounds (diallyl disulfide, dipropyl disulfide, diallyl sulfide, allyl methyl sulfide, allyl mercaptan, cysteine, and cystine) on the formation of heterocyclic aromatic amines (HAAs) in fried ground beef patties were evaluated. Minced garlic cloves (ca. 4.8 to 16.7%, wt/wt) or organosulfur compounds (0.67 mmol) were added directly to ground beef. Patties (100 g) were fried at 225 degrees C (surface temperature) for 10 min per side. Two patties were fried for each replication, and five replicates were analyzed for each treatment. For each replicate, four subsamples were analyzed (two unspiked subsamples for concentration and two spiked subsamples for the recovery of HAA standards). The volatile sulfur compounds significantly (P < 0.05) reduced concentrations of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine by reductions of 46 to 81%, while average reductions of 35, 22, and 71%, were achieved with cystine, cysteine, and whole garlic, respectively. The volatile sulfur compounds reduced concentrations of 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline by 34 to 67%, while reductions of 25, 19, and 63% (P < 0.05) were achieved with cystine, cysteine, and whole garlic, respectively. These studies confirm that garlic and some organosulfur compounds have the potential to reduce HAA formation incooked beef patties.     

A boundary-element method for elastostatics in a plane region bounded by a smooth curve

The traditional boundary-element method for elastostatics in a plane region bounded by a smooth curve is modified. A circular element is used for which an analytical scheme for the traction problem is derived. It is shown that the construction of the elements of the coefficient matrix reduces to computing a simple integral which has a closed form solution. This leads to higher accuracy of the final results and considerable saving of computational efforts. The procedure is illustrated by some examples and the accuracy of the method as well as its efficiency are compared with those obtained from commonly used numerical techniques.     

ADSORPTION OF ORGANICS FROM A TRUE IN-SITU OIL SHALE RETORT WATER ON ACTIVATED CARBON IN PACKED BEDS

The adsorption of a true in-situ oil shale retort water on activated carbon at 278 and 298 K was studied in batch experiments and in packed beds with continuous liquid flow. The isotherms were nonlinear over the liquid concentration 0 to 875 mg/1. Breakthrough curves were obtained in packed bed experiments as a function of bed length, particle size, and liquid velocity. A differential approach was used to calculate the mass transfer coefficients and the rates of adsorption. Also the breakthrough curves were analyzed to establish the relative importance of the various individual mechanisms that contributed to the overall adsorption process.     

Studies on the Dynamics of D–T Fusion Reaction Based on the Relativistic Equilibrium Velocity Distribution

The Coulomb barrier is in general much higher than thermal energy. Nuclear fusion reactions occur only among few protons and nuclei (i.e., deuterium and tritium) with higher relative energies than Coulomb barrier. It is the equilibrium velocity distribution of these high-energy protons and nuclei that participates in determining the rate of nuclear fusion reactions. In the circumstance it is inappropriate to use the Maxwellian velocity distribution for calculating the nuclear fusion reaction rate. We use the relativistic equilibrium has a reduction factor with respect to that based on the Maxwellian distribution, which factor depends on the temperature, reduced mass and atomic numbers of the studied nuclear fusion reactions. In this paper, we concluded at energy range 10⁵ (keV) ≤ E ≤ 10⁶ (keV), that is smaller than reduced mass energy of deuterium–tritium, m _r c ², the numerical values of R and R _M are not different from each other very much, but by increasing energy near the region of m _r c ² the difference between them are visible, also by increasing energy for example 9 × 10⁶ (keV) ≤ E ≤ 10 × 10⁶ (keV) the difference is obviously more visible. Therefore, we have to use relativistic equilibrium velocity distribution instead of Maxwellian velocity distribution.     

Preparation of Al2O3–TiB2 nanocomposite powder by mechanochemical reaction between Al,B2O3 and Ti

Mechanochemical processing is a novel technique for the synthesis of nano-sized materials. This research is based on the production of Al₂O₃–TiB₂ nanocomposite powder using mechanochemical processing. For this purpose, a mixture of aluminum, titanium and boron oxide powders was subjected to high energy ball milling. The structural evaluation of powder particles after different milling times was conducted by X-ray diffractometry (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results showed that during ball milling the Al/B₂O₃/Ti reacted with a combustion mode producing Al₂O₃–TiB₂ nanocomposite. In the final stage of milling, the crystallite sizes of Al₂O₃ and TiB₂ were estimated to be less than 50 nm.