Lipid-Lowering Effect of Eriocitrin, the Main Flavonoid in Lemon Fruit, in Rats on a High-Fat and High-Cholesterol Diet

ABSTRACT:  Eriocitrin (eriodictyol 7- O -β-rutinoside) is the main flavonoid in lemon fruit. In this study, eriocitrin was investigated for its lowering effect on serum and hepatic lipids in high-fat and high-cholesterol fed rats. Rats in the control group ( N = 6) were fed a 20% lard and 1% cholesterol diet for 21 d, and rats in the 0.35% eriocitrin group ( N = 6) and 0.70% eriocitrin group ( N = 6) were fed a diet supplemented with eriocitrin 0.35% and 0.70%, respectively. The content of hepatic total cholesterol and triglyceride in the eriocitrin group was no different from that of the control group. The total cholesterol, VLDL+LDL, triglyceride, and phospholipid in the serum of the 0.35% eriocitrin group showed significantly lower concentrations than the control group ( P < 0.05), although there was no difference in the HDL concentrations among the groups. The lowering effect of eriocitrin for serum total cholesterol was thought to be caused by a decrease in VLDL+LDL. The 0.35% eriocitrin group was shown to have a significant increase in excretion of fecal bile acid ( P < 0.05) and a tendency for enhanced hepatic m-RNA levels of LDL receptor in comparison with the control group.     

Paraneoplastic neurologic syndromes. 2. Lambert-Eaton myasthenic syndrome. 1) The molecular structure of calcium channel and immunology

The effect of divalent cations on the inactivation of Escherichia coli by high hydrostatic pressure was investigated. The presence of 0.5 mmol l-1 of CaCl2, MgCl2, MnCl2 and FeCl2 reduced pressure inactivation of E. coli MG1655, while 0.5 mmol l-1 of ZnCl2, NiCl2, CuCl2 and CoCl2 increased inactivation. Baroprotection by Ca2+ was found to be dose-dependent up to at least 80 mmol l-1 and was studied in more detail in terms of inactivation kinetics. Logarithmic survivor plots against time deviated from first order kinetics, suggesting that MG1655 cultures were heterogeneous with regard to pressure resistance. All cultures were shown to contain a small proportion of cells that were only slowly inactivated. Addition of Ca2+ increased the proportion of these tolerant cells in the cultures up to 1000-fold at 80 mmol l-1, but did not affect their inactivation rate. The addition of EDTA resulted in the opposite effect, lowering the proportion of pressure-tolerant cells in the cultures. Three pressure-resistant mutants of E. coli MG1655 were found to be more resistant to EDTA under pressure compared with MG1655, and were unaffected by Ca2+ under pressure. In addition, these mutants had a 30-40% lower Ca2+ content than MG1655. Based on these results, it is postulated that pressure killing of E. coli MG1655 is mediated primarily by the destabilization of Ca(2+)-binding components, and that the mutations underlying pressure resistance have resulted in pressure-stable targets with reduced Ca(2+)-binding affinity.     

Partial oxidation of ethane to synthesis gas over Co-loaded catalysts

Attention has been increasingly paid to the partial oxidation of lower alkanes to synthesis gas, due to its intrinsic energy saving process. We studied the partial oxidation of ethane (POE) on Co loaded on various supports. The POE performance varied as follows: Y₂O₃, CeO₂, ZrO₂, La₂O₃  SiO₂, Al₂O₃, TiO₂ > MgO. Comparing Y₂O₃ and CeO₂, the carbon deposition during the POE was negligible on CeO₂ and therefore CeO₂ was the most preferable support. By changing space velocity and O₂ partial pressure, reaction mechanism of POE was studied and it was revealed that two-step mechanism was prevailing; combustion of ethane to H₂O and CO₂ and subsequent reforming of ethane with H₂O and CO₂ to synthesis gas. Co/CeO₂ catalyst exhibited high and stable catalytic activity for 10 h; high ethane conversion of 18% (maximum ethane conversion 20% at O₂/C₂H₆ = 0.2) with H₂ and CO selectivities of 93 and 84%, respectively.     

Dispersion of SiC in Aqueous Media with Al2O3 and Y2O3 as Sintering Additives

It has been well accepted that polyethylene imine (PEI) is an effective dispersant for silicon carbide (SiC) in aqueous media. However, after the addition of sintering additives (Al₂O₃ and Y₂O₃), this dispersing effect is reduced significantly. In this work, a second dispersant, citric acid, was used to resolve this problem. It was found that citric acid could decrease the slurry viscosity (without sintering additives) and enhance the PEI adsorption on SiC particle surface. The optimal amount of citric acid required to achieve a minimum viscosity for 55 vol% SiC suspensions was equal to ∼0.87 wt% (at pH ∼6.8). With the aid of citric acid, well-stabilized SiC suspensions (containing sintering additives) were realized, which exhibited slight shear thinning rheologies. After tape casting and SPS sintering, dense SiC samples were obtained with a homogeneous fine-crystalline microstructure. Results showed that citric acid was an effective dispersant for improving the dispersion of SiC particles containing sintering additives.     

Effect of Nd2O3 Concentration on the Defect Structure of CeO2–Nd2O3 Solid Solution

An extensive X-ray study of CeO₂–Nd₂O₃ solid solutions was performed, and the densities of solid solutions containing various concentrations of NdO_1.5 were measured using several techniques. Solid solutions containing 0–80 mol% NdO_1.5 were synthesized by coprecipitation from Ce(NO₃)₃ and Nd(NO₃)₃ aqueous solutions, and the coprecipitated samples were sintered at 1400°C. A fluorite structure was observed for CeO₂–NdO_1.5 solid solutions with 0–40 mol% NdO_1.5, which changed to a rare earth C-type structure at 45–75 mol% NdO_1.5. The change in the lattice parameters of CeO₂–NdO_1.5 solid solutions, when plotted with respect to the NdO_1.5 concentration, showed that the lattice parameters followed Vegard's law in both the fluorite and rare earth C-type regions. The maximum solubility limit for NdO_1.5 in CeO₂ solid solution was approximately 75 mol%. The relationship between the density and the Nd concentration indicated that the defect structure followed the anion vacancy model over the entire range (0–70 mol% NdO_1.5) of solid solution.     

Magnetic Correlation in BETS2(Cl2TCNQ)

We carried out⁷⁷Se NMR measurements on BETS₂(Cl₂TCNQ) under pressure in order to investigate the magnetic properties of the insulating state which appears above 0.6 GPa. The relaxation rate 1/T₁ at 0.7 GPa shows small peak-like anomaly at 20 K, indicating a spin density wave transition as observed in BETS₂(Br₂TCNQ).     

11B NMR Study of Pure and Lightly Carbon-Doped MgB2 Superconductors

We report a¹¹B NMR line shape and spin-lattice relaxation rate (1/(T ₁ T)) study of pure and lightly carbon-doped MgB_2−x C _x forx=0, 0.02, and 0.04, in the vortex state and in magnetic field of 23.5 kOe. We show that while pure MgB₂ exhibits the magnetic field distribution from superposition of the normal and the Abrikosov state, slight replacement of boron with carbon unveils the magnetic field distribution of the pure Abrikosov state. This indicates a considerable increase ofH _c ^2/c with carbon doping with respect to pure MgB₂. The spin-lattice relaxation rate 1/(T ₁ T) demonstrates clearly the presence of a coherence peak right belowT _c in pure MgB₂, followed by a typical BCS decrease on cooling. However, at temperatures lower than ≈10 K strong deviation from the BCS behavior is observed, probably from residual contribution of the vortex dynamics. In the carbon-doped systems both the coherence peak and the BCS temperature dependence of 1/(T ₁ T) weaken, an effect attributed to the gradual shrinking of the σ hole cylinders of the Fermi surface with electron doping.     

11B NMR Study of Pure and Lightly Carbon-Doped MgB2 Superconductors

We report a ¹¹B NMR line shape and spin-lattice relaxation rate (1/(T₁T))(1/(T_1T)) study of pure and lightly carbon-doped MgB_2-xC_x_{2-x}{\rm C}_x for x = 0,0.02x = 0,0.02, and 0.04, in the vortex state and in magnetic field of 23.5 kOe. We show that while pure MgB₂_2 exhibits the magnetic field distribution from superposition of the normal and the Abrikosov state, slight replacement of boron with carbon unveils the magnetic field distribution of the pure Abrikosov state. This indicates a considerable increase of H^c_c2H^c_{c2} with carbon doping with respect to pure MgB₂_2. The spin-lattice relaxation rate 1/(T₁T)1/(T_1T) demonstrates clearly the presence of a coherence peak right below T_cT_{\rm c} in pure MgB₂_2, followed by a typical BCS decrease on cooling. However, at temperatures lower than ?\approx 10 K strong deviation from the BCS behavior is observed, probably from residual contribution of the vortex dynamics. In the carbon-doped systems both the coherence peak and the BCS temperature dependence of 1/(T₁T)1/(T_1T) weaken, an effect attributed to the gradual shrinking of the σ hole cylinders of the Fermi surface with electron doping.     

Isotope 18O/16O ratio measurements of water vapor by use of the 950-nm wavelength region with cavity ring-down and photoacoustic spectroscopic techniques

Two optical methods, cavity ring-down spectroscopy and photoacoustic spectroscopy, are applied to the measurement of the isotope ratio 18O/16O in water-vapor samples with a Nd3+:YAG pumped-dye laser. The combination band of (2v1 + v3) in the 960-nm region of water molecules is investigated for two standard water samples, the Vienna Standard Mean Ocean Water and the Standard Light Antarctic Precipitation. The results demonstrate that the two methods have the potential of compact systems for in-situ measurements of H2O isotope ratio in the environment.