Nonlinear buckling optimization of composite structures

The paper presents an approach to nonlinear buckling fiber angle optimization of laminated composite shell structures. The approach accounts for the geometrically nonlinear behaviour of the structure by utilizing response analysis up until the critical point. Sensitivity information is obtained efficiently by an estimated critical load factor at a precritical state. In the optimization formulation, which is formulated as a mathematical programming problem and solved using gradient-based techniques, a number of the lowest buckling factors are included such that the risk of “mode switching” during optimization is avoided. The presented optimization formulation is compared to the traditional linear buckling formulation and two numerical examples, including a large laminated composite wind turbine main spar, to clearly illustrate the pitfalls of the traditional formulation and the advantage and potential of the presented approach.     

The manpower allocation problem with time windows and job-teaming constraints: A branch-and-price approach

In this paper, we consider the manpower allocation problem with time windows, job-teaming constraints and a limited number of teams (m-MAPTWTC). Given a set of teams and a set of tasks, the problem is to assign to each team a sequential order of tasks to maximize the total number of assigned tasks. Both teams and tasks may be restricted by time windows outside which operation is not possible. Some tasks require cooperation between teams, and all teams cooperating must initiate execution simultaneously. We present an integer programming model for the problem, which is decomposed using Dantzig–Wolfe decomposition. The problem is solved by column generation in a branch-and-price framework. Simultaneous execution of tasks is enforced by the branching scheme. To test the efficiency of the proposed algorithm, 12 realistic test instances are introduced. The algorithm is able to find the optimal solution in 11 of the test instances. The main contribution of this article is the addition of synchronization between teams in an exact optimization context.     

Optimization of methods and treatment conditions for studying effects of fatty acids on cell growth

Antiproliferative properties of molecular regulators of lipid metabolism have been increasingly studied during recent years. Discussion is ongoing concerning optimal treatment conditions and assays used for monitoring proliferation and cytotoxicity. The objective of the present work was to optimize methods and treatment conditions used for studying antiproliferative effects of fatty acids and analogs, represented by palmitic acid (PA) and the β-oxidation-restricted fatty acid analog tetradecylthioacetic acid (TTA), in rat (BT4Cn) and human (D54Mg and GaMg) glioma cell lines. Changes in [³H]thymidine incorporation preceded changes in cell number in TTA-treated glioma cell cultures, and the growth inhibition was more significantly expressed by [³H]thymidine incorporation than cell number. Addition of bovine serum albumin decreased cellular fatty acid uptake and reduced the effects of TTA and PA on [³H]thymidine incorporation. Determination of the antiproliferative effect of TTA in BT4Cn cells by MTT conversion and [³H]thymidine incorporation yielded concordant results. TTA-mediated reduction in cell number corresponded to reduction in cellular protein and total DNA content in BT4Cn cells. Reduced growth potential in TTA-treated multicellular D54Mg and GaMg spheroids supported the findings from monolayer cultures. In conclusion, cell density, treatment period, fatty acid administration, and methods for growth determination may profoundly influence the outcome of cell growth experiments. Thus, experimental conditions should be carefully controlled when performing cell growth experiments, and effects on cell growth should preferably be confirmed by different methods. Karl Johan Tronstad and Kjetil Berge contributed equally to this article.     

Singlet oxygen microscope: from phase-separated polymers to single biological cells

The lowest excited electronic state of molecular oxygen, singlet molecular oxygen (a1Deltag), is an intermediate in many chemical and biological processes. Tools and methods have been developed to create singlet-oxygen-based optical images of heterogeneous samples that range from phase-separated polymers to biological cells. Such images provide unique insight into a variety of oxygen-dependent phenomena, including the photoinitiated death of cells.     

<Emphasis Type="Italic">T</Emphasis><Subscript>2</Subscript> mapping of cerebrospinal fluid: 3 T versus 7 T

Object

Cerebrospinal fluid (CSF) T ₂ mapping can potentially be used to investigate CSF composition. A previously proposed CSF T ₂–mapping method reported a T ₂ difference between peripheral and ventricular CSF, and suggested that this reflected different CSF compositions. We studied the performance of this method at 7 T and evaluated the influence of partial volume and B ₁ and B ₀ inhomogeneity.

Materials and methods

T ₂-preparation-based CSF T ₂-mapping was performed in seven healthy volunteers at 7 and 3 T, and was compared with a single echo spin-echo sequence with various echo times. The influence of partial volume was assessed by our analyzing the longest echo times only. B ₁ and B ₀ maps were acquired. B ₁ and B ₀ dependency of the sequences was tested with a phantom.

Results

T _2,CSF was shorter at 7 T compared with 3 T. At 3 T, but not at 7 T, peripheral T _2,CSF was significantly shorter than ventricular T _2,CSF. Partial volume contributed to this T ₂ difference, but could not fully explain it. B ₁ and B ₀ inhomogeneity had only a very limited effect. T _2,CSF did not depend on the voxel size, probably because of the used method to select of the regions of interest.

Conclusion

CSF T ₂ mapping is feasible at 7 T. The shorter peripheral T _2,CSF is likely a combined effect of partial volume and CSF composition.

     

Accumulation of magnetic iron oxide nanoparticles coated with variably sized polyethylene glycol in murine tumors

Iron oxide nanoparticles have found widespread applications in different areas including cell separation, drug delivery and as contrast agents. Due to water insolubility and stability issues, nanoparticles utilized for biological applications require coatings such as the commonly employed polyethylene glycol (PEG). Despite its frequent use, the influence of PEG coatings on the physicochemical and biological properties of iron nanoparticles has hitherto not been studied in detail. To address this, we studied the effect of 333-20,000 Da PEG coatings that resulted in larger hydrodynamic size, lower surface charge, longer circulation half-life, and lower uptake in macrophage cells when the particles were coated with high molecular weight (M(w)) PEG molecules. By use of magnetic resonance imaging, we show coating-dependent in vivo uptake in murine tumors with an optimal coating M(w) of 10,000 Da.     

Soliton dynamics in photonic-crystal fibers for coherent Raman microspectroscopy and microscopy

We describe various generation schemes that employ soliton dynamics in photonic-crystal fibers to generate a red-shifted femtosecond pulse with high efficiency. We then detail how to use this pulse along with the initial femtosecond laser pulse for coherent Raman experiments. We describe various measurement schemes that, though utilizing this pair of femtosecond pulses, mimick the preferred measurement scheme for coherent Raman microspectroscopy where one pulse is transform-limited and of picosecond duration; or for coherent Raman microscopy where both pulses are transform-limited and of picosecond duration. We finally discuss how to increase pulse energy and give some perspective on the realization of a coherent Raman endoscope based on soliton dynamics.     

Post‐buckling optimization of composite structures using Koiter's method

Thin‐walled structures, when compressed, are prone to buckling. To fully utilize the capabilities of such structures, the post‐buckling response should be considered and optimized in the design process. This work presents a novel method for gradient‐based design optimization of the post‐buckling performance of structures. The post‐buckling analysis is based on Koiter's asymptotic method. To perform gradient‐based optimization, the design sensitivities of the Koiter factors are derived, and new design optimization formulations based on the Koiter factors are presented. The proposed optimization formulations are demonstrated on a composite square plate and a curved panel where the post‐buckling stability is optimized. Copyright © 2016 John Wiley & Sons, Ltd.     

Maternal cooking during pregnancy may increase hyperactive behaviors among children aged at around 3 years old

Cooking is one of the main sources of indoor air pollution in China. Given emerging evidence of a link between air pollutants and neurodevelopmental delays, we examined whether maternal experiences with cooking during gestation might increase their child's hyperactivity at 3 years of age. The participants involved 45 518 mothers of children who were newly enrolled at kindergarten in the Longhua District of Shenzhen from 2015 to 2017. The results show that maternal exposure to cooking fumes during pregnancy was related to an increased risk of their offspring having hyperactivity behaviors at the age of 3 years. Compared with pregnant mothers who never cooked, pregnant mothers who cooked sometimes, often, or always had children who showed a significantly higher hyperactivity risk. Households using cooking fuels such as coal, gas during the mothers’ pregnancy, exhibited more hyperactivity behaviors in the young child when compared to those using electricity for cooking. In addition, poor ventilation during cooking, while mothers were pregnant, was found to be a significant risk factor for clinical levels of the offspring's hyperactive behaviors. Furthermore, the positive association with maternal cooking during pregnancy and their offsprings’ hyperactivity was relatively consistent across strata defined by social class, education, and other covariates.     

Direct aerobic oxidation of primary alcohols to methyl esters catalyzed by a heterogeneous gold catalyst

Methyl esters can be produced in high yields by oxiding methanolic solutions of primary alcohols with dioxygen over a heterogeneous gold catalyst. The versatility of this new methodology is demonstrated by the fact that alkylic, benzylic and allylic alcohols, as well as alcohols containing an amine functionality are oxidized in good to excellent yields.