Engineering Model of a Nonisobaric Heavily Laden Gas‐Particle Jet

An axisymmetrical model of a rapid nonisobaric heavily laden gas‐particle jet is developed. The model is based on the general functions for both axial and radial pressure distributions, which were discovered by a numerical study of rapid gas‐particle jets by the CFD code. The model equations were solved analytically. The results obtained by the model developed are in good agreement with those computed by the CFD code for a wide range of flow parameters.     

Phase transitions of canola oil sediment

Canola sediment was obtained from an industrial filter cake by solvent extraction. When heated in the differential scanning calorimeter (DSC) (5–100°C), the sediment exhibited a single narrow melting peak at around 74.8°C. No solid-state polymorphic transformation of the material could be detected over this temperature range. The X-ray powder diffraction pattern of canola sediment resembled waxes from other sources with an orthorhombic unit cell. The phase transition behavior of canola sediment in oil was studied by both DSC and polarizing microscopy. With increasing ratio of oil/sediment, a reduction in both melting temperature and transition enthalpy was observed. The shape of the supercooling curve resembled that of the melting curve. The induction time was determined by spectrophotometry and was used to calculate the interfacial free energyσ between sediment and oil; σ=4.71 erg/cm². The effect of temperature and sediment concentration on the clouding time of canola oil was studied; the clouding time was the shortest at 5°C.     

Effects of operational parameters on emission performance and combustion efficiency in small-scale CFBCs

A well-designed CFBC can burn coal with high efficiency and within acceptable levels of gaseous emissions. In this theoretical study effects of operational parameters on combustion efficiency and the pollutants emitted have been estimated using a developed dynamic 2D (two-dimensional) model for CFBCs. Model simulations have been carried out to examine the effect of different operational parameters such as excess air and gas inlet pressure and coal particle size on bed temperature, the overall CO, NO_x and SO₂ emissions and combustion efficiency from a small-scale CFBC. It has been observed that increasing excess air ratio causes fluidized bed temperature decrease and CO emission increase. Coal particle size has more significant effect on CO emissions than the gas inlet pressure at the entrance to fluidized bed. Increasing excess air ratio leads to decreasing SO₂ and NO_x emissions. The gas inlet pressure at the entrance to fluidized bed has a more significant effect on NO_x emission than the coal particle size. Increasing excess air causes decreasing combustion efficiency. The gas inlet pressure has more pronounced effect on combustion efficiency than the coal particle size, particularly at higher excess air ratios. The developed model is also validated in terms of combustion efficiency with experimental literature data obtained from 300 kW laboratory scale test unit. The present theoretical study also confirms that CFB combustion allows clean and efficient combustion of coal.     

The enzymic release of fatty acids from phosphatidylcholine in green peas (Pisum sativum)

‘Phospholipid acyl-hydrolase’ (PLAH), an enzymic activity releasing fatty acid from phosphatidylcholine (PC), has been identified and characterised in green peas. The K_m value for PC dipalmitoyl ester was 0·167 mm. The enzymic activity possessed a pH optimum of 5·6 and was stable for 20 min only at that pH value. The optimum temperature was 45°C and thermal sensitivity was indicated by a 94% decrease in activity upon exposure of the enzyme to 55°C for 3 min, and by an exponential decrease in activity upon storage at 4°C for 1 week. The enzyme was optimally activated by 2·0 mm calcium chloride at pH 5·6, and the optimal concentration of sodium dodecyl sulphate was 0·75 mg ml^?1. Pea PLAH was non-competitively inhibited by sodium cyanide, EDTA and p-chloromercuribenzoate, with no activity in the presence of mercuric chloride. The results from this study are related to those of other workers on lipid-degrading enzymes in peas, and a pathway is proposed for the enzymic degradation of endogenous lipids in fresh or unblanched frozen peas during post-harvest storage.     

Peculiarities of a Unified Environmentally Clean System of Etching and Bright Pickling α- and α + β-Titanium Alloys

The kinetics of dissolution, hydrogenation, and bright pickling of titanium alloys in either still or stirred solutions, or under the effect of ultrasound is investigated. In solutions containing H₂O₂ or K₂S₂O₈ as an oxidizer, under ultrasonic treatment, the hydrogenation is practically absent due to stable positive electrode potential, while the dissolution rate can be increased by a factor of 2 to 2.5. A unified environmentally clean solution system for etching and bright pickling of 1-0, 4200, and T6 alloys is developed instead of nitric acid solutions.