Surface modification of ultra‐high‐molecular‐weight polyethylene. II. Effect on the physicomechanical and tribological properties of ultra‐high‐molecular‐weight polyethylene/poly(ethylene terephthalate) composites

We performed surface modification of ultra‐high‐molecular‐weight polyethylene (UHMWPE) through chromic acid etching, with the aim of improving the performance of its composites with poly(ethylene terephthalate) (PET) fibers. In this article, we report on the morphology and physicomechanical and tribological properties of modified UHMWPE/PET composites. Composites containing chemically modified UHMWPE had higher impact properties than those based on unmodified UHMWPE because of improved interfacial bonding between the polymer matrix and the fibers and better dispersion of the fibers within the modified UHMWPE matrix. Chemical modification of UHMWPE before the introduction of PET fibers resulted in composites exhibiting improved wear resistance compared to the base material and compared to unmodified UHMWPE/PET composites. On the basis of the morphological studies of worn samples, microploughing and fatigue failure associated with microcracking were identified as the principle wear mechanisms. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Rheology,structure, and properties of ethylene–vinyl acetate/metallocene‐catalyzed ethylene–α‐olefin copolymer blends

The rheology, morphology, thermal, mechanical, and adhesive properties of blends containing ethylene–vinyl acetate and metallocene‐catalyzed ethylene–α‐olefin copolymers, containing butene and octene comonomers, were investigated. On the basis of the thermal and rheological properties and scanning electron microscopy observations, we deduced that these blends were immiscible, both in the solid and melt states over the whole range of compositions. Rheological properties were correlated to blend morphology with the Palierne emulsion model. The butene‐based blends had better mechanical properties, which was attributed to their finer morphology, lower interfacial tension, and better adhesive properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 881–889, 2004     

Volatile fraction of commercial thyme honeys produced in Mediterranean regions and key volatile compounds for geographical discrimination: A chemometric approach

The aim of the present study was to investigate the volatile fraction and discriminate 34 commercial thyme honeys from Morocco, Egypt, Spain, and Greece according to geographical origin, using key volatile compounds in combination with chemometrics. Sixty-two volatile compounds belonging to different classes were identified and semi-quantified using headspace solid phase micro-extraction coupled to gas chromatography/mass spectrometry (HS-SPME-GC/MS). Applying chemometric analyses to 17 volatiles (p < 0.05), honeys were successfully discriminated according to geographical origin. Correct classification rate was 88.2% using the cross-validation method. Volatile compounds proved to be a powerful tool for discriminating commercial thyme honeys from different countries.     

Effect of moisture on salmonella spp. heat resistance in cocoa and hazelnut shells

The heat resistance of food-poisoning outbreak and non-outbreak associated strains of Salmonella (S. Enteritidis, S. Montevideo, S. Napoli, S. Oranienburg, S. Poona, S. Senftenberg and S. Typhimurium) was established in confectionery-related materials such as crushed cocoa bean and hazelnut shells at low moisture contents (≤ 4% w/w). The two most heat resistant strains in cocoa and hazelnut shells at ca. 4% w/w moisture were S. Oranienburg and S. Enteritidis PT30. Both strains were associated with outbreaks from dried materials. Their D_100°C values were ca. 2.5 min in crushed cocoa bean shells and 7–11 min in crushed hazelnut shells. Addition of moisture to ca. 7% w/w markedly reduced D-values (D_80°C of 2–4.5 min) for both strains in the two matrices.     

Molecular Advances in Preeclampsia and HELLP Syndrome

Preeclampsia (PE) constitutes one of the principal reasons for maternal and perinatal morbidity and mortality worldwide. The circumstance typically implicates formerly healthful normotensive women, after 20 weeks of gestation, typically withinside the third trimester, without regarded threat elements or past deliveries. PE can be further complicated with hemolysis and thrombocytopenia, leading to the emergence of HELLP syndrome (Hemolysis, Elevated Liver enzymes, Low platelets). Both conditions are classified as hypertensive diseases of pregnancy (HDP), and their pathogenesis has been linked to an excessive maternal inflammatory response, accompanied by enhanced endothelial activation. Several studies have found that in pregnancies affected by PE/HELLP, von Willebrand factor (vWF) antigen levels (vWF:Ag) are significantly elevated, while its cleaving protease (ADAMTS-13, A Disintegrin-like and Metalloprotease with Thrombospondin type 1 motif, member 13) activity is normal to decreased. Furthermore, the higher urine excretion of the terminal complement complex C5b-9, as well as its greater deposition in the placental surface in preeclamptic women, imply that the utero-placental unit’s distinctive deficits are intimately tied to disproportionate complement activation. The goal of this updated evaluation is to provide the most up-to-date molecular advances in the pathophysiology of PE/HELLP syndromes. Recent medical data on vWF:Ag levels in patients with PE, ADAMTS-13, and dysregulation of the complement system, are highlighted and evaluated. Furthermore, we discuss the relationship between those entities and the progression of the disease, as well as their significance in the diagnostic process. Finally, considering the difficulties in analyzing and controlling those symptoms in pregnant women, we can provide a current diagnostic and therapeutic algorithm.     

The effects of clay dispersion on the mechanical,physical, and flame‐retarding properties of wood fiber/polyethylene/clay nanocomposites

In this study, nanosized clay particles were introduced into wood fiber/plastic composites (WPCs) to improve their mechanical properties and flame retardancy, which are especially important in various automotive and construction applications. A high degree of exfoliation for nanoclay in the wood fiber/high density polyethylene (HDPE) composites was successfully achieved with the aid of maleated HDPE (PE‐g‐MAn), through a melt blending masterbatch process. The structures and morphologies of the composites were determined using X‐ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. This article presents the effects of clay content and degree of clay dispersion on the mechanical and physical properties and flame retardancy of wood fiber/HDPE composites that contained a small amount of clay, in the range of 3–5 wt %. We concluded that achieving a higher degree of dispersion for the nanosized clay particles is critical to enhance the mechanical properties and the flame retardancy of WPCs when small amounts of clay are used. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010