Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms

This work investigates emulsion templating to synthesize hexadecane oil/geopolymer composites. In a system with hexadecane as the internal (dispersed) phase and an alkali activated continuous phase without added surfactant, adding aluminosilicate clay particles does not increase resistance against creaming or coalescence, while adding a surfactant (L35 or CTAB) stabilizes the solid-liquid interface. Infrared studies and rheological studies of the associated geopolymerization determined that the presence of the organic phase or surfactant has no significant effect on the geopolymerization kinetics, as determined by the change in time of the Si-O-T IR stretching frequency and the rheological moduli involved during the process. The stabilization of the organic template is reminiscent of Pickering emulsion even though we employ a much greater amount of inorganic material for geopolymer formation. Although the addition of surfactant has a significant effect on the behavior of the paste, the percolation of the network remains unmodified, highlighting the fact that the phenomenon is not dependent on viscosity. Finally, rheological measurements were used to obtain the mass fractal dimension of the as-made gel network, which is able to differentiate the interfacial effect between surfactant molecules with a slightly denser interphase when a cationic surfactant is used.     

Making polyurethane foams from microemulsions

A remarkable correlation exists between the degree of expansion of polyurethane foams and the structure of the reacting premixes. Polyurethane foams obtained from reacting premixes containing microemulsions are highly expanded. The expansion rate is proportional to the volume fraction of microemulsion in the premix. The stability of premixes with and without microemulsion is completely different suggesting distinct creaming mechanisms. We apply this idea to synthesize polyurethane foams from microemulsions successfully. This approach can be used to rationalize the design of polyurethane formulations leading to highly expanded foams.     

Characterization of the chicken and quail homologues of the human gene responsible for the X-linked Kallmann syndrome

The human KAL gene, responsible for the X-linked Kallmann syndrome, was isolated previously. Southern blot analysis using human cDNA probes detected cross-hybridization with DNA from several organisms, including chicken and quail. The entire coding sequences of chicken and quail KAL cDNAs were determined. A comparison of these cDNAs with the human KAL cDNA reveals an overall identity of 73 and 72%, respectively. This results in 76 and 75% identity at the protein level. The highest conservation was found in the WAP four-disulfide core motif and in two of the four fibronectin type III repeats reported in the human protein. These results further support the hypothesis that the KAL protein is an extracellular matrix component with anti-protease and adhesion functions.     

Jitter in ATM networks and its impact on peak rate enforcement

Cells arriving to an ATM network experience random delays due to queueing in upstream multiplexing stages, notably in customer premises. This is the phenomenon of jitter and the aim of the present paper is to study its influence on peak rate enforcement. We first introduce some general characterizations of jitter and then, describe two models of jittered flows based on simple queueing systems. We discuss the objectives of peak rate enforcement and study the impact of jitter on the dimensioning of jumping window and leaky bucket mechanisms. A useful synthetic characterization of jitter appears to be a remote quantile of the cell delay distribution expressed in units of the initial inter-cell interval.     

Coupled effect of time and temperature on variations of yield value of highly flowable mortar

In order to enhance the performance of self-consolidating concrete, it is important to have a better understanding of the rheological behavior of the material. The initial rheological parameters and their variations with time are closely affected by material temperature, type and dosage of high range water-reducing admixture (HRWRA), and elapsed time. This paper presents the results of an investigation aimed at evaluating the coupled influence of time and temperature on the variations of yield value with time of mortars made with two types of HRWRA: polynaphtalene sulfonate and polycarboxylate polymer. Four mortars extracted from self-consolidating concrete mixtures proportioned with various binder types and with water-to-binder ratios of 0.42 and 0.53 were prepared at 10 to 30 °C.Test results show that the yield value varies linearly with the coupled effect of time and temperature during the dormant period for mixtures made with polynaphtalene sulfonate-based HRWRA. However, such changes are found to depend on the mixture temperature for mixtures made with polycarboxylate-based HRWRA, which can influence the dispersion efficiency of the polycarboxylate polymer. The threshold temperature of mixtures made with PCP-HRWRA is shown to vary with mixture composition. Below a given threshold temperature, the mortar exhibits a considerable degree of retention or even reduction in yield value over 30% of the dormant period. A sharp increase in yield value is observed beyond 30% of the dormant period. Above this threshold temperature, the yield value is shown to increase linearly with time.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

Photocatalytic degradation of gaseous perchloroethylene in continuous flow reactors: Rate enhancement by chlorine radicals

The degradation of perchloroethylene (PCE) by UV/TiO₂ photocatalysis in gas phase was studied. The degradation efficiency has been compared in different continuous flow reactors: a photocatalytic tangential reactor (PTR) where the air flows tangentially over the catalytic medium and two photocatalytic filtering reactors (PFR) where the air flows through the porous catalytic medium. The degradation rate shows a linear dependence with the concentration of pollutants (up to 350 mg PCE/N m³) for the PTR, but the degradation was negligible for the PFR. The degradation rate was enhanced by accelerating the chlorine radicals’ formation (by adding HCl in catalytic quantity in the air flow or by PCE over-heating). In these conditions, the oxidation rate constant of PCE in the PFR was about five times higher than that in the PTR, although the mass of catalyst involved in the PFR was about 10 times lower and the contact time was about a 1000 times shorter than that of the PTR. Thus, the catalyst is globally more efficiently used in the PFR, as the mass transfer is not limiting. As a result, a degradation mechanism of PCE, involving the generation of free chlorine radicals, as the first limiting step, has been confirmed.     

Creutzfeldt-Jakob disease: neurophysiologic visual impairments

OBJECTIVE: The predictive value of electrophysiologic visual testing in Creutzfeldt-Jakob disease (CJD) was investigated, and the retinal pathologic findings in three cases are reported. BACKGROUND: The fatal prognosis of CJD, its transmissibility, and the lack of treatment make early diagnosis essential in averting human-to-human transmission. Electroretinogram and visual evoked potentials have been studied in few cases of CJD. METHODS: A visual electrophysiologic examination was performed in 41 consecutive patients referred with suspected CJD. The disease had been diagnosed in 24 patients (CJD group; 15 were confirmed neuropathologically and 9 by clinicolaboratory methods in accordance with diagnostic criteria). The remaining 17 patients were diagnosed with other neurologic disorders, and served as a control group. RESULTS: Flash electroretinogram revealed a significant decrease in the amplitude of the B1 wave (<60 microV) and the B/A ratio (<2) in the CJD group compared with those in the control group. Flash visual evoked potentials revealed no significant difference in latency, but amplitude was increased (>10 microV) in the CJD group, especially in patients with myoclonus. CONCLUSIONS: The visual electrophysiologic abnormalities provide an interesting noninvasive diagnostic tool in idiopathic CJD. The B1-wave decrease is closely correlated with the outer plexiform layer abnormalities observed on neuropathologic examination.     

Fabrication of a biocompatible flexible electroosmosis micropump

In in-vivo microsystems, one of the components is a biocompatible micropump in order to produce the necessary force to deliver the fluid from the inlet to the outlet. In this contribution, a flexible micropump is fabricated which is aimed to be suitable in drug delivery applications. It provides high degree of biocompatibility, since the only employed materials are implantation grade polydimethylsiloxane elastomer and gold for the electrical interconnects. The working principle of the micropump is based on transverse DC electroosmosis which is a new variant of conventionally applied high voltage DC electroosmosis. This new technique is based on topography irregularities introduced in the channel resulting in a non-uniform charge distribution. The advantage is to drive the micropump using a relatively low DC voltage of 10 V while getting an effective flow speed of 60 μm/s. In order to characterize the flow speed, dyed 3 μm beads are dispersed in the working fluid and their speed is measured by the line scanning technique using a confocal microscope. It is also observed that the flow has a helical profile which is an attractive feature for an efficient micro-mixer in active microfluidics and μ-TAS applications.