Full AC analysis of value of DER to the grid and optimal DER scheduling

This paper presents part of the work ComEd and Quanta Technology have performed to quantify the locational and temporal value of DER to avoid distribution grid upgrade investments. It focuses on the formulation of a robust and efficient algorithm for DER optimal dispatch on a distribution feeder to mitigate the violation of current and voltage limits using the allocated cost of capacity and locational marginal value of real and reactive DER injection/withdrawal.     

Reconstruction of reflectance spectra using weighted principal component analysis

The weighted principal component analysis technique is employed for reconstruction of reflectance spectra of surface colors from the related tristimulus values. A dynamic eigenvector subspace based on applying certain weights to reflectance data of Munsell color chips has been formed for each particular sample and the color difference value between the target, and Munsell dataset is chosen as a criterion for determination of weighting factors. Implementation of this method enables one to increase the influence of samples which are closer to target on extracted principal eigenvectors and subsequently diminish the effect of those samples which benefit from higher amount of color difference. The performance of the suggested method is evaluated in spectral reflectance reconstruction of three different collections of colored samples by the use of the first three Munsell bases. The resulting spectra show considerable improvements in terms of root mean square error between the actual and reconstructed reflectance curves as well as CIELAB color difference under illuminant A in comparison to those obtained from the standard PCA method. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 360–371, 2008     

Bioprinting a cell-laden matrix for bone regeneration: A focused review

Although many efforts have been made to regenerate the bone lesions, existing challenges can be mitigated through the development of tissue engineering scaffolds. However, the weak control on the microstructure of constructs, limitation in preparation of patient-specific and multilayered scaffolds, restriction in the fabrication of cell-laden matrixes, and challenges in preserving the drug/growth factors' efficacy in conventional methods have led to the development of bioprinting technology for regeneration of bone defects. So in this review, conventional 3D printers are classified, then the priority of the different types of bioprinting technologies for the preparation of the cell/growth factor-laden matrixes are focused. Besides, the bio-ink compositions, including polymeric/hybrid hydrogels and cell-based bio-inks are classified according to fundamental and recent studies. Herein, different effective parameters, such as viscosity, rheological properties, cross-linking methods, biodegradation biocompatibility, are considered. Finally, different types of cells and growth factors that can encapsulate in the bio-inks to promote bone repair are discussed, and both in vitro and in vivo achievement are considered. This review provides current and future perspectives of cell-laden bioprinting technologies. The restrictions and challenges are identified, and proper strategies for the development of cell-laden matrixes and high-performance printable bio-inks are proposed.     

Power-delay-product optimal repeater design for horizontal and vertical multilayer graphene nanoribbon interconnects

Journal of Computational Electronics - Power-delay-product optimal design of repeater size and number design for both horizontal and vertical multilayer graphene nanoribbon (MLGNR) interconnects is...     

Interactive smart battery storage for a PV and wind hybrid energy management control based on conservative power theory

This paper presents interactive smart battery-based storage (BBS) for wind generator (WG) and photovoltaic (PV) systems. The BBS is composed of an asymmetric cascaded H-bridge multilevel inverter (ACMI) with staircase modulation. The structure is parallel to the WG and PV systems, allowing the ACMI to have a reduction in power losses compared to the usual solution for storage connected at the DC-link of the converter for WG or PV systems. Moreover, the BBS is embedded with a decision algorithm running real-time energy costs, plus a battery state-of-charge manager and power quality capabilities, making the described system in this paper very interactive, smart and multifunctional. The paper describes how BBS interacts with the WG and PV and how its performance is improved. Experimental results are presented showing the efficacy of this BBS for renewable energy applications.     

Ultraviolet Lamp Output Measurement: A Concise Derivation of the Keitz Equation

An equation relating the measured irradiance and the output power of a fluorescent lamp was derived by Keitz. The equation forms the basis for a new protocol that has been proposed for quantifying the total flux from an ultraviolet lamp. There has been confusion in the literature regarding the spatial distribution of flux from lamp emitters, which has led to emission models that are similar to the Keitz model but are incorrect. The Keitz equation is derived here from first principles in an effort to eliminate the confusion and present a correct method of calculating total flux.     

Development of a simulation model for a three-dimensional wind velocity field using Ténès Algeria as a case study

A mathematical simulation model was developed that can determine the three-dimensional wind velocity field over a complex terrain. The Ténès area in the Valley of Cheliff in Algeria was used as a case study. This region is exposed to south-west circulation that makes it favorable to the use of wind energy. Knowledge of wind fields is crucial for predicting the dispersion of pollutants, for forecasting meteorological weather, for fire spread prediction and in the design and implementation of wind turbines. By means of a mass consistent model, an in-house program was developed to calculate the three-dimensional wind velocity field in the study region. The model was supported by a numerical box in which flow through is allowed for in the upper and lateral boundaries. The bottom boundary through which no flow through occurs was determined by the topographic relief at the surface. From measured wind velocities, observed values were calculated by interpolation-extrapolation. Using an optimization method, the adjusted velocities were obtained from constraints, observed velocities and the continuity equation. The model was verified with wind point data, the relative error did not exceed 6%.     

Differential graphical games for H∞ control of linear heterogeneous multiagent systems

Differential graphical games have been introduced in the literature to solve state synchronization problem for linear homogeneous agents. When the agents are heterogeneous, the previous notion of graphical games cannot be used anymore and a new definition is required. In this paper, we define a novel concept of differential graphical games for linear heterogeneous agents subject to external unmodeled disturbances, which contain the previously introduced graphical game for homogeneous agents as a special case. Using our new formulation, we can solve both the output regulation and H_∞ output regulation problems. Our graphical game framework yields coupled Hamilton‐Jacobi‐Bellman equations, which are, in general, impossible to solve analytically. Therefore, we propose a new actor‐critic algorithm to solve these coupled equations numerically in real time. Moreover, we find an explicit upper bound for the overall ‐gain of the output synchronization error with respect to disturbance. We demonstrate our developments by a simulation example.     

Multi-level cross-layer protocol for end-to-end delay provisioning in wireless multimedia sensor networks

Frontiers of Information Technology & Electronic Engineering - Rapid developments in information and communication technology in recent years have posed a significant challenge in wireless...