Determination of atmospheric turbidity in Bangladesh

Atmospheric turbidity parameters have been determined following Angstrom's method at three locations in Bangladesh namely, Dhaka city (23.7°N) and two rural locations, Haripur (26.03°N) and Sripur (24.11°N). The parameters were obtained from direct solar radiation data for specific spectral regions and for the whole spectrum as measured using a normal incidence pyrheliometer provided with cut-off glass filters. A considerable variation of Angstrom's turbidity parameters for Dhaka over the year was observed with a maximum value in March. The value for Sripur for the month of March was somewhat lower and the value for Haripur for the month of April was not much different from that of Dhaka. Linke turbidity factor T_L was also determined using the new value of solar constant 1367 W/m² for all three locations.     

A new technique for multi-cell joint channel estimation in time division code division multiple access based on reduced rank singular value decomposition

A new technique for multi-cell joint channel estimation (MCJCE) in time division code division multiple access based on singular value decomposition (SVD) reduced rank technique is proposed in this paper. MCJCE is one of the effective solutions to improve the mobile system performance throughout mitigate the inter-cell interference form the neighboring cells. The increasing complexity of multi-cell system model due to the additional processing of the interferer users will be solved by using SVD reduced rank technique, where a limited number of parameter that really need it to describe the channel matrix will be estimated. Two models of multi-cell approaches are discussed, the first one depended on reconstruct the convolutional midamble matrix of inactive users in serving cell by the strongest interferer users from the neighboring cells. The second one will be more inclusive to user traffic scenarios in mobile systems and will be expanding to contain all detected users. The simulation results prove the validity of the proposed reduced rank technique for precision channel estimation (6.4 and 5 dB) and (9 and 7 dB) for case 1 and 2 respectively; BER performance improvements over the conventional estimators.     

Magnetohydrodynamic bio‐nanoconvective Naiver slip flow of micropolar fluid in a stretchable horizontal channel

The purpose of this paper is to formulate and analyze a nano‐bio transport model for magnetohydrodynamic convective flow, heat, and mass diffusion of micropolar fluid containing gyrotactic microorganisms through a horizontal channel. Both the walls are considered to be stretched, and the Navier slip boundary condition is taken into account. The governing bio‐nano transport partial differential equations are rendered to ordinary differential equations using similarity variables. The resulting normalized self‐similar boundary value problem is solved computationally with the Matlab bvp4c function. The effect of the controlling parameters on the nondimensional velocity, temperature, nanoparticle concentration, and motile microorganism density functions, and their gradients at the wall are visualized graphically and in a tabular form and expounded at length. Validation with a previous simpler model is included. All physical quantities, except the local Nusselt number, increases with an increase in the velocity slip and magnetic parameters. The present problem finds applications in industries related to pharmaceutical, nanofluidic devices, microbial enhanced oil recovery, modeling oil, and gas‐bearing sedimentary basins.     

Enhanced Hydrogen Generation from Empty Fruit Bunches by Charcoal Addition into a Downdraft Gasifier

Hydrogen production by co-gasification of empty fruit bunches of palm oil could be enhanced by adding charcoal. Physiochemical characterization of raw feedstocks was performed to determine their exergy potentiality. The raw feedstocks, gasified charcoal, and the end product of produced gas were analyzed by different techniques. Gasification experiments were performed using a pilot-scale downdraft gasifier. The heating value, composition of product gas, yield of hydrogen, and exergy efficiency were used to verify the improvement of hydrogen production during the co-gasification process. Charcoal with empty fruit bunches of palm oil leads to a much higher yield of hydrogen than lower charcoal ratios or solely empty fruit bunches. This enhanced hydrogen fuel can contribute to future energy demand.     

Electrical and thermo-mechanical analysis of beam recovery system for megawatt power gyrotron

The paper presents the electrical and thermo-mechanical design of single stage beam recovery system for 120 GHz, 1 MW gyrotron. The electrical study shows that the cylindrical shape single stage beam recovery system enhances the efficiency by 66.26%. The maximum power deposited to collector in depressed collector operation is 0.48 MW for electronic efficiency, 30% and 1.44 MW for DC electron beam. The thermo-mechanical analysis has been performed to evaluate the water cooling system. The cooling system has capability of accommodating a peak wall loading, 0.9 kW/cm² at flow rate of 1500 l/min for safe operating time, 60 ms. Further, a high voltage analysis is also carried out to appraise the electric field distribution in the collector.     

Simulation of Filament Heater for Uniform Emission from Dispenser Cathode

This paper presents the design study of toroid shape filament heater for dispenser cathode.The filament heater will be used in cathode assembly of 200 kW 42 GHz gyrotron. A 3 D model of cathode assembly is designed using electromagnetic and thermal simulation software, ANSYS. The simulations are performed for optimizing the input filament heater power with respect to cathode surface temperature. The parametric study shows that the input power and cathode surface temperature depends strongly on the potting material, diameter of filament, number of turns, position and height of the filament heater with respect to cathode pellet. The design analyses are also carried out for two different filament heater materials i.e. tungsten and molybdenum. Further, the thermal, structural and transient analyses are also carried out to study the mechanical strength of the filament heater. It is concluded that the input heater power should be greater than 200 W to achieve cathode surface temperature greater than 1,000°C.     

Superposition Coding with Unequal Error Protection for the Uplink of Overloaded DS-CDMA System

The overloaded CDMA schemes exploited in direct sequence CDMA (DS-CDMA) systems are mainly to accommodate a greater number of users than the available spreading factor N. In this paper, a superposition coding CDMA (SPC-CDMA) with unequal error protection (UEP) is proposed as one of the overloaded CDMA schemes for the next generation mobile communication systems. It exploits the available power control in most base stations to adapt the transmitted power of active users in the uplink channel. In this scheme, the active users are divided into G groups and each group consists of K users. The K users share the same spreading sequence and are distinguished by different received power levels. At the receiver side, the system first performs despreading for group detection followed by multiuser receiver to estimate the K user signals in each group. It is shown through simulations that better performance are achieved compared to the conventional DS-CDMA and existing overloaded collaborative spreading CDMA (CS-CDMA) schemes, in additive white Gaussian noise (AWGN) and fading channels. Hence, the proposed scheme maximizes the system capacity K-fold compared to conventional DS-CDMA system without requiring extra spreading codes, with average signal to noise ratio (SNR) cost of only 1dB and 2 dB over AWGN and fading channels respectively at BER of 10^?3. On the other hand, for the same N, K and power constraints, SPC-CDMA scheme achieves twofold increase in data rate with 0.7 and 4 dB gains over AWGN and fading channels respectively, compared with overloaded CS-CDMA scheme in the same system capacity. In addition, the proposed scheme can also attain different levels of UEP for different users?? requirements by adjusting their fractions of transmitted powers.