Improved extra group network: a new fault-tolerant multistage interconnection network

Supersystems are shown to provide enough computational power to solve complex problems on a real-time basis. In all these systems, the computational parallelism is obtained from multiple processors. Multistage interconnection networks (MINs) play a vital role on the performance of these multiprocessor systems. This paper introduces a new fault-tolerant MIN named as improved extra group network (IEGN). IEGN is designed by existing extra group (EGN) network, which is a regular multipath network with limited fault tolerance. IEGN provides four times more paths between any source–destination pairs compared with EGN. The performance of IEGN has been evaluated in terms of permutation capability, fault tolerance, reliability, path length, and cost. It has also been proved that the IEGN can achieve better results in terms of fault tolerance, reliability, path length and cost-effectiveness, in comparison to known networks, namely, EGN, augmented baseline network, augmented shuffle-exchange network, fault-tolerant double tree, Benes network, and Replicated MIN.     

Effect of Iron sulfate as electrolyte additive on plasma electrolytic oxidation of aluminum alloy

This study has been carried out to investigate the incorporation of Iron(II) sulfate as an additive of electrolyte on formed AA1010 aluminum alloy, using plasma electrolytic oxidation method in silicate-based electrolytes containing Iron(II) sulfate. In order to fabricate nanocomposite coating, silicon nitride nanopowder was added to electrolyte. The effects of iron(II) sulfate additive on the voltage-time trend, microstructure, compositions, wear, and corrosion resistances of PEO coatings were investigated. In addition, current density and concentration of additive were studied as parameters that were effective on coating. Results showed that although FeSO₄ enters to the coating structure, but it does not develop a new phase. The corrosion and wear behavior of coated samples with FeSO₄ indicate an improvement as compared to those without additive.     

A new synthetic metamodel methodology for liquid‐propellant engine's cooling system optimization

The present paper strives for optimization of the cooling system of a liquid‐propellant engine (LPE). To this end, the new synthetic metamodel methodology utilizing the design of experiment method and the response surface method was developed and implemented as two effective means of designing, analyzing, and optimizing. The input variables, constraints, objective functions, and their surfaces were identified. Hence, the design and development strategy of combustion chamber and nozzle was clarified, and 64 different experiments were carried out on the RD‐161 propulsion system, of which 47 experiments were approved and compatible with the problem constraints. This engine used all three modes of cooling: the radiation cooling, the regenerative cooling, and the film cooling. The response surface curves were drawn and the related objective function equations were obtained. The analysis of variance results indicate that the developed synthetic model is capable to predict the responses adequately within the limits of input parameters. The three‐dimensional response surface curves and contour plots have been developed to find out the combined effects of input parameters on responses. In addition, the precision of the models was assessed and the output was interpreted and analyzed, which showed high accuracy. Therefore, the desirability function analysis has been applied to LPE's cooling system for multiobjective optimization to maximize the total heat transfer and minimize the cooling system pressure loss simultaneously. Finally, confirmatory tests have been conducted with the optimum parametric conditions to validate the optimization techniques. In conclusion, this methodology optimizes the LPE's cooling system, a 2% increase in the total heat transfer, and a 38% decrease in the pressure loss of the cooling system. These values are considerably large for the LPE design.     

Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.     

A supervisory control policy over an acoustic communication network

This paper presents a supervisory multi-agent control policy over an acoustic communication network subject to imperfections (packet dropout and transmission delay) for localisation of an underwater flow source (e.g., source of chemical pollution, fresh water, etc.) with an unknown location at the bottom of the ocean. A two-loop control policy combined with a coding strategy for reliable communication is presented to perform the above task. A simulator is developed and used to evaluate the trade-offs between quality of communication, transmission delay and control for a fleet of autonomous underwater vehicles supervised over a noisy acoustic communication network by an autonomous surface vessel. It is illustrated that without compensation of the effects of severe random packet dropout, localisation of an unknown underwater flow source is not possible for the condition simulated just by implementing a two-loop control policy. But a two-loop control policy combined with a strategy for reliable communication locates the unknown location of flow source.     

Development of an electrochemical sulfite biosensor by immobilization of sulfite oxidase on conducting polyaniline film

In this work, a biosensor was developed for the determination of sulfite. The bioelectrochemical response of the enzyme-modified electrode based on electrochemical incorporation of sulfite oxidase into polyaniline aluminum modified electrode was investigated. Electropolymerization of polyaniline and simultaneous immobilization of sulfite oxidase on the aluminum were performed in an aqueous solution containing sulfite oxidase. The sulfite biosensor constructed by cycling the potential scan between +1.2 and ?0.5 V vs. saturated calomel electrode (SCE) that showed a sensitive response to sulfite with a linear calibration graph in the concentration ranges of 0.006–5 mM sulfite and detection limit 0.002 mM sulfite (S/N = 3). The obtained results from the stability tests of the biosensor show that the sulfite biosensor can be used for two different applications, for immediate usage and long term usage. Also, the bioelectrochemical response of the enzyme-modified electrode as a sulfite biosensor was evaluated at different experimental conditions. The optimum pH when using phosphate buffer and temperature were 8.5 and 35 °C, respectively. Finally, the apparent Michaelis–Menten constant was determined which has value of 0.365 mM which is really close to the magnitude of the Michaelis–Menten constant of free sulfite oxidase that shows the enzyme was not chemically modified and has its usual kinetic reaction.     

High yield gold nanoparticle‐based DNA isolation method for human papillomaviruses genotypes from cervical cancer tissue samples

Gold nanoparticles (AuNPs) are commonly used in biosensors of various kinds. However, its application to extract DNA from cancer tissues has not been extensively studied. The purification of DNA from cancer tissues is an important step in diagnostic and therapeutic development. Almost, all cervical cancer cases are associated with high‐risk human papillomavirus (HR‐HPV) infection. Accurate viral diagnosis has so far relied on the extraction of adequate amounts of DNA from formalin‐fixed, paraffin‐embedded (FFPE) tissue samples. Till now, no specific and sensitive DNA purification method has been introduced for the extraction of HR‐HPV from FFPE tissue. Since the commercially available purification kits are not sensitive and specific enough for HR‐HPV DNA targets, in this study, a DNA purification method was designed based on AuNPs to purify sufficient amounts of HR‐HPV DNA from cervical cancer tissue samples. AuNPs were coated with a series of oligonucleotide probes to hybridize to specific DNA sequences of HR‐HPV genotypes. Results showed that 733 out of 800 copies of type‐specific HPV DNA were recovered with complete specificity, compared to 36 copies with a standard commercial kit (Qiagen FFPE). The high yield of DNA (91.6%) is the main advantage of the AuNPs‐probe purification method.Inspec keywords: cancer, biological tissues, microorganisms, gold, DNA, lab‐on‐a‐chip, gynaecology, purification, biochemistry, molecular biophysics, nanoparticles, nanomedicine, cellular biophysicsOther keywords: specific extraction method, cervical cancer tissue samples, high‐risk human papillomavirus infection, paraffin‐embedded tissue samples, specific DNA purification method, sensitive DNA purification method, FFPE tissue, HR‐HPV DNA targets, specific DNA sequences, HR‐HPV genotypes, type‐specific HPV DNA, AuNP‐probe purification method, gold nanoparticle‐based DNA isolation method, oligonucleotide, human papillomaviruse genotypes, clinical samples, Au     

Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement–slag mortar

Activation methods and curing regimes have crucial effects on the strength of mortars and concretes. The objective of this investigation is to examine the early and later compressive strength of activated ordinary Portland cement (OPC)–ground granulated blast-furnace slag (GGBFS) mortars and identify the most effective activation technique. The methods of activation used were thermal, mechanical and thermal–mechanical combined. Two curing regimes were adopted and five groups of mortars were prepared. It was observed that OPC–GGBFS mortars have greater sensitivity to OPC mortars against the curing regimes. However, the study revealed that there was no particular activation method which when used gave the best results for both early and later strengths and did not cause strength loss. It also proved that the most effective activation method for early strength is a combination of both the thermal and mechanical, while for later strengths, none of the activation methods was recommended.