Effect of Iron sulfate as electrolyte additive on plasma electrolytic oxidation of aluminum alloy

This study has been carried out to investigate the incorporation of Iron(II) sulfate as an additive of electrolyte on formed AA1010 aluminum alloy, using plasma electrolytic oxidation method in silicate-based electrolytes containing Iron(II) sulfate. In order to fabricate nanocomposite coating, silicon nitride nanopowder was added to electrolyte. The effects of iron(II) sulfate additive on the voltage-time trend, microstructure, compositions, wear, and corrosion resistances of PEO coatings were investigated. In addition, current density and concentration of additive were studied as parameters that were effective on coating. Results showed that although FeSO₄ enters to the coating structure, but it does not develop a new phase. The corrosion and wear behavior of coated samples with FeSO₄ indicate an improvement as compared to those without additive.     

Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.     

A supervisory control policy over an acoustic communication network

This paper presents a supervisory multi-agent control policy over an acoustic communication network subject to imperfections (packet dropout and transmission delay) for localisation of an underwater flow source (e.g., source of chemical pollution, fresh water, etc.) with an unknown location at the bottom of the ocean. A two-loop control policy combined with a coding strategy for reliable communication is presented to perform the above task. A simulator is developed and used to evaluate the trade-offs between quality of communication, transmission delay and control for a fleet of autonomous underwater vehicles supervised over a noisy acoustic communication network by an autonomous surface vessel. It is illustrated that without compensation of the effects of severe random packet dropout, localisation of an unknown underwater flow source is not possible for the condition simulated just by implementing a two-loop control policy. But a two-loop control policy combined with a strategy for reliable communication locates the unknown location of flow source.     

High yield gold nanoparticle‐based DNA isolation method for human papillomaviruses genotypes from cervical cancer tissue samples

Gold nanoparticles (AuNPs) are commonly used in biosensors of various kinds. However, its application to extract DNA from cancer tissues has not been extensively studied. The purification of DNA from cancer tissues is an important step in diagnostic and therapeutic development. Almost, all cervical cancer cases are associated with high‐risk human papillomavirus (HR‐HPV) infection. Accurate viral diagnosis has so far relied on the extraction of adequate amounts of DNA from formalin‐fixed, paraffin‐embedded (FFPE) tissue samples. Till now, no specific and sensitive DNA purification method has been introduced for the extraction of HR‐HPV from FFPE tissue. Since the commercially available purification kits are not sensitive and specific enough for HR‐HPV DNA targets, in this study, a DNA purification method was designed based on AuNPs to purify sufficient amounts of HR‐HPV DNA from cervical cancer tissue samples. AuNPs were coated with a series of oligonucleotide probes to hybridize to specific DNA sequences of HR‐HPV genotypes. Results showed that 733 out of 800 copies of type‐specific HPV DNA were recovered with complete specificity, compared to 36 copies with a standard commercial kit (Qiagen FFPE). The high yield of DNA (91.6%) is the main advantage of the AuNPs‐probe purification method.Inspec keywords: cancer, biological tissues, microorganisms, gold, DNA, lab‐on‐a‐chip, gynaecology, purification, biochemistry, molecular biophysics, nanoparticles, nanomedicine, cellular biophysicsOther keywords: specific extraction method, cervical cancer tissue samples, high‐risk human papillomavirus infection, paraffin‐embedded tissue samples, specific DNA purification method, sensitive DNA purification method, FFPE tissue, HR‐HPV DNA targets, specific DNA sequences, HR‐HPV genotypes, type‐specific HPV DNA, AuNP‐probe purification method, gold nanoparticle‐based DNA isolation method, oligonucleotide, human papillomaviruse genotypes, clinical samples, Au     

Improvement of performance of polyamide reverse osmosis membranes using dielectric barrier discharge plasma treatment as a novel surface modification method

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m‐phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), SEM, AFM, and contact angle measurements. The ATR‐FTIR results indicated that DBD plasma treatment caused hydrogen bonding on the surface of RO membranes. Also, the contact angle measurement showed that the hydrophilicity of the membranes was increased due to DBD plasma treatment. The changes in the membranes surface morphology indicated that the surface roughness of the membranes was increased after surface modification. In addition, it was found that the DBD plasma treatment increased the water permeation flux significantly and enhanced sodium chloride (NaCl) salt rejection slightly. Moreover, the filtration of bovine serum albumin revealed that the antifouling properties of the modified membranes had been improved. POLYM. ENG. SCI., 59:E468–E475, 2019. © 2018 Society of Plastics Engineers     

Effect of the Wet Outlet Geometry on the Shockwave Position in Supersonic Separators

Supersonic separators (3Ss) are applied in gas separation processes. Two-dimensional simulation is employed to investigate the effect of operational and thermophysical parameters on the shockwave position. In addition, the impact of the cyclonic part and wet outlet geometry is evaluated by proposing four cases. Increasing the length of the cyclonic part exerts positive and negative influences on the performance of the 3S and the pressure recovery coefficient, respectively. The optimum length is determined between 10 and 15 cm. To demonstrate negative effects of wasted air from the wet outlet, its flow has been increased from 3.6 to 8.1 % of the inlet flow. Improved performance of the 3S is obtained by reducing the flow disturbances around the wet outlet and moving the shockwave towards the outlet.     

Compensation of voltage disturbances in distribution systems using single-phase dynamic voltage restorer

In this paper, a new topology is proposed for a single-phase dynamic voltage restorer (DVR) using direct ac/ac converter. This topology does not require dc-link energy storage elements. The proposed topology has a simple structure and can compensate several types of voltage disturbances such as voltage sags, swells, harmonics and flickers. This topology will not face any problem in long time compensation due to the fact that it provides the required energy directly through grid. The proposed topology can be easily extended to n-phase systems such as three-phase based on the same principle of the operation. In n-phase systems, the voltage sags and swells can be properly compensated regardless of the balanced or unbalanced operation. A new control method is also proposed for direct ac/ac converter in the proposed topology. The simulation and experimental results verify the effectiveness of the proposed topology and its control method in voltage restoration.     

Lattice Boltzmann simulation of mixed convection heat transfer in eccentric annulus

Mixed convection heat transfer in eccentric annulus was simulated numerically by lattice Boltzmann model (LBM) based on multi-distribution function double-population approach. The effect of eccentricity on heat transfer at various locations was examined at Ra = 10⁴ and σ = 2. Velocity and temperature distributions as well as Nusselt number are obtained. The results are validated with published results and shown that multi-distribution function approach can evaluate the velocity and temperature fields in curved moving boundaries with a good accuracy in comparison with the previous studies. The results show that the average Nusselt number increases when the inner cylinder moves downward regardless of the radial position.