Reduction of optical beat interference in SCM/WDMA networks usingpseudorandom phase modulation

A new approach is suggested to reduce the optical beat interference (OBI) in subcarrier multiplexed (SCM) wavelength-division multiple access (WDMA) networks. The idea is to deliberately introduce independent random polarization fluctuations in the electric fields transmitted on each optical channel. Random polarization results in an expanded OBI spectrum, and hence, less OBI power at the reference user receiving filter output. Electro-optic phase modulation is used to introduce polarization randomness in the fields before they are coupled into the fibers, A two-user system was simulated. Simulation results show the drastic reduction in OBI power spectral density using appropriate PN signals     

Study on the properties of crosslinking of poly(ethylene oxide) and hydroxyapatite–poly(ethylene oxide) composite

This study covers the crosslinking of poly(ethylene oxide) (PEO) and its composite with calcium hydroxyapatite (HA), their mechanical and swelling properties, and morphology. Sheets of the composites of PEO (two different grades with M_v: 5 × 10⁶ and 2 × 10⁵) and HA and neat PEO were prepared by compression molding. The prepared composite and PEO (0.1‐mm‐thick) sheets were crosslinked with exposure of UV‐irradiation in the presence of a photoinitiator, acetophenone (AP). This simple method for crosslinking, induced by UV‐irradiation in the presence of AP, yielded PEO with gel content up to 90%. Gel content, equilibrium swelling ratio, and mechanical and morphological properties of the low molecular weight polyethylene oxide (LMPEO)–HA crosslinked and uncrosslinked composites were evaluated. Although the inclusion of HA into LMPEO inhibits the extent of crosslinking, the LMPEO–HA composite with 20% HA by weight shows the highest gel content, with appreciable equilibrium swelling and mechanical strength. The growth of HA in simulated body fluid solutions on fractured surfaces of LMPEO and also LMPEO–HA was found to be very favorable within short times. The dimensional stability of these samples was found to be satisfactory after swelling and deposition experiments. The good compatibility between the filler hydroxyapatite and poly(ethylene oxide) makes this composite a useful tissue‐adhesive material. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 488–496, 2003     

The in-line inspection of carbon anodes for aluminum production

In this paper, methods for measuring the quality of carbon anodes consumed in the commercial production of aluminum are discussed. The electrical and mechanical qualities of these anodes are important for the economic operation of the aluminum plant. While the investigation is ongoing, results from tests made at an aluminum reduction plant are included. The methods reviewed include direct resistivity measurement using core samples, ultrasonic measurement, the hammer method, analysis of the Hall effect, the four-probe method, and use of magnetic coils (various arrangements).     

Re-engineering the Engineering Change Management process for a drawing-less environment

Currently, 3D models and 2D drawings are the main basic elements that together form and carry the product definition throughout the product lifecycle. With the advent of the Digital Product Definition trend, industries have been interested in adopting a Model-based Definition (MBD) approach that enables the integration of drawing annotations directly onto a 3D model, thereby minimizing the need to generate engineering drawings. This drawing-less environment requires a way to adequately carry the product definition throughout a product's lifecycle while supporting all of the downstream users’ specific needs. The objective of this article is to present a solution to carry the Engineering Change Management (ECM) process in a drawing-less environment. Therefore, based on ECM process requirements from two Canadian aerospace companies, we propose an MBD dataset which consists of an MBD model and a distribution file. The proposed MBD dataset is evaluated and the MBD-driven ECM process is outlined.     

Knowledgeable Cyberbrokers for electronic markets

Electronic commerce is just beginning to be realisable. A number of technological, sociological and economic developments will be required before a large-scale roll out of electronic commerce can be expected. An architectural framework should be defined and needs to incorporate the semantics of contracting and negotiation based on knowledge technology. Electronic commerce has recently increased the demand for personalisation capabilities dramatically. This would imply the use of user-adaptive agents. Because electronic commerce is intrinsically interactive with virtual catalogues, this framework should make such interaction possible. This framework is centred around the Cyber e-Broker concept based on knowledge-based agents. Electronic commerce involves parties that may belong to different domains or administrations with different ontologies. This framework should enable manipulation of such information and enable conversion between ontologies. The e-broker ensures the correct negotiation protocols, and enforces the constraints and contracts, but also interacts with the virtual catalogues.     

Nano-structured zinc oxide–cotton fibers: synthesis, characterization and applications

Zinc oxide nanoparticles were prepared and subsequently deposited onto the surface of the cotton fiber by ultrasonic irradiation. The optical, structure and morphology of the coated and un-coated cotton were examined by UV, fourier transform infrared spectroscopy, X-ray diffraction analysis (XRD) and scanning electron microscope (SEM)/Energy Dispersive X-ray analysis. XRD analysis revealed the presence of the crystalline metal oxide of hexagonal phase with an average crystallite size of 12 nm. These nanoparticles are probably physically adsorbed onto the cotton fiber surface. SEM analysis showed a distribution of ZnO nanorod assemblies of various diameters and lengths physically adsorbed onto the cotton fiber surface may take place. The ZnO-cotton fiber nano-composite were tested against Escherichia coli (gram negative) and Staphylococcus aureus (gram positive) cultures, and showed a significant antimicrobial activity.     

Biosurfactant Mediated Biosynthesis of Selected Metallic Nanoparticles

Developing a reliable experimental protocol for the synthesis of nanomaterials is one of the challenging topics in current nanotechnology particularly in the context of the recent drive to promote green technologies in their synthesis. The increasing need to develop clean, nontoxic and environmentally safe production processes for nanoparticles to reduce environmental impact, minimize waste and increase energy efficiency has become essential in this field. Consequently, recent studies on the use of microorganisms in the synthesis of selected nanoparticles are gaining increased interest as they represent an exciting area of research with considerable development potential. Microorganisms are known to be capable of synthesizing inorganic molecules that are deposited either intra- or extracellularly. This review presents a brief overview of current research on the use of biosurfactants in the biosynthesis of selected metallic nanoparticles and their potential importance.     

A Taguchi design approach for the enhancement of a detergent-biocompatible alkaline thermostable protease production by Streptomyces mutabilis strain TN-X30

The ability of microorganisms to grow at high temperature, alkaline pH, and high salinity makes them an attractive target for enzyme-production with several industrial applications. One strain TN-X30 has been selected as protease producer and identified as Streptomyces mutabilis after a phenotypic and molecular study. Its production of protease was improved using Taguchi L27 design. The strategy was carried out to identify the optimum levels and the interaction of the screened factors. Following this step, maximum protease activity (10,895 U/ml) was achieved after 6-days of incubation. The TN-X30 protease activity had an optimum of pH and temperature of 10 and 65°C, respectively. Thermodynamic parameters at 60°C were enthalpy 14.26 kJ/mol, entropy −220 J/mol/K, and Gibbs free energy 90.53 kJ/mol. TN-X30 protease production displayed a 16-fold increase reaching 175,000 U/ml in a 100-L fermentor. Furthermore, the lyophilization in presence of sorbitol enhanced the stability of the TN-X30 protease which remained active at 75% after 24-months of storage. The lyophilized TN-X30 protease exhibited exceptional stability indexes in presence of some known commercialized detergent components as NEODOL® 25-7, Dehydol® LT 7, Na₂ CMC, Galaxy LAS, Galaxy LES 70, Galaxy 110, Galaxy CAPB Plus, and Sulfacid K. The lyophilized enzyme also displayed high stability with respect to both solid and liquid detergents. Finally, TN-X30 protease exhibited remarkable destaining of blood, egg, and chocolate stained cloth pieces. These findings may promote TN-X30 protease for use as bioadditive in detergent formulation, thereby reducing environmental chemical threat.