Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites

The enhancement of the thermal conductivity, keeping the electrical insulation, of epoxy thermosets through the addition of pristine and oxidized carbon nanotubes (CNTs) and microplatelets of boron nitride (BN) was studied. Two different epoxy resins were selected: a cycloaliphatic (ECC) epoxy resin and a glycidylic (DGEBA) epoxy resin. The characteristics of the composites prepared were evaluated and compared in terms of thermal, thermomechanical, rheological and electrical properties. Two different dispersion methods were used in the addition of pristine and oxidized CNTs depending on the type of epoxy resin used. Slight changes in the kinetics of the curing reaction were observed in the presence of the fillers. The addition of pristine CNTs led to a greater enhancement of the mechanical properties of the ECC composite whereas the oxidized CNTs presented a greater effect in the DGEBA matrix. The addition of CNTs alone led to a marked decrease of the electrical resistivity of the composites. Nevertheless, in the presence of BN, which is an electrically insulating material, it was possible to increase the proportion of pristine CNTs to 0.25 wt% in the formulation without deterioration of the electrical resistivity. A small but significant synergic effect was determined when both fillers were added together. Improvements of about 750% and 400% in thermal conductivity were obtained in comparison to the neat epoxy matrix for the ECC and DGEBA composites, respectively. © 2019 Society of Chemical Industry     

Biological evaluation of two anomeric glucose analogues iodinated in position 6

Two anomeric analogues of glucose labelled with 123 iodine in position 6, proposed as tracers of glucose transport in vivo, have been synthesized: alpha- and beta-methyl-6-deoxy-6-iodo-D-glucopyranoside (alpha MDIG and beta MDIG). The aim of this study was to determine whether these molecules interact with the glucose transporter and whether they could be used as tracers of glucose transport in vivo. The biodistribution of alpha MDIG and beta MDIG was studied in the mouse in vivo. To determine if these two anomers enter the cell via the glucose transporter, their uptake was measured in isolated perfused rat hearts, in human erythrocytes in suspension, and in cardiomyocytes of neonatal rat in culture. Both alpha MDIG and beta MDIG had similar repartitions in the mouse: myocardial uptake averaged 7% of the injected dose/g of organ at 2 min postinjection and alpha MDIG competed with D-glucose to enter the cells. Insulin produced a 123% increase of its uptake in isolated perfused rat hearts and a 100% increase in cardiomyocytes of neonatal rat in culture. alpha MDIG uptake was lowered in the presence of glucose transport inhibitors in each experimental model. An interaction between beta MDIG and glucose transporters was observed only in human erythrocytes in suspension. Only alpha MDIG interacts with the glucose transporter, and thus could be used to estimate glucose transport in vivo.     

Macroscopic and crystallographic density of solid-state extruded polyethylene

Summary The influence of draw ratio on macroscopic and crystallographic density of polyethylene with different initial morphologies, has been investigated by solid-state extrusion. An initial drop followed by an increase in macroscopic density as a function of draw ratio has been observed. Since precision X-ray measurements of unit cell parameters showed no variation of crystallographic density, it was concluded that plastic deformation of polyethylene upon drawing proceeds with a decrease of the degree of crystallinity. This was confirmed by differential scanning calorimetry.     

Arthroscopic lysis in knee arthrofibrosis

OBJECTIVE: To compare the efficacy and toxicity of three patient-controlled analgesia (PCA) morphine regimens. DESIGN: A prospective, randomized, pilot study of three PCA morphine regimens: (1) 1 mg with 6-minute lockout (n = 10), (2) 2 mg with 12-minute lockout (n = 12), and (3) 2 mg with 20-minute lockout (n = 12). SETTING: Large teaching institution. PARTICIPANTS: Thirty-four patients undergoing cholecystectomy or hysterectomy. MAIN OUTCOME MEASURES: Pain scores (0 = no pain, 1 = mild pain, 2 = moderate pain, 3 = severe pain), sedation scores, analgesic consumption, and patient attempts (patient activation of PCA device) and injections (doses actually delivered) were evaluated using analysis of covariance. Distribution of pain and sedation scores and adverse effects were assessed using Fisher's exact test. RESULTS: Data on 24 patients were evaluable. Six patients withdrew for poor pain control (2 in group 1, 1 in group 2, and 3 in group 3). Three other patients withdrew because of adverse effects and 1 withdrew because of pump problems. Mean morphine consumption did not differ significantly among the groups. Distribution of pain and sedation scores and the number of patients with nausea were similar across treatment groups. The mean injection to attempt ratio was significantly smaller in group 3 (0.71 +/- 0.11) compared with groups 1 and 2 (0.9 +/- 0.06 and 0.83 +/- 0.09, respectively; p = 0.001). Adverse events occurred similarly among treatment groups. CONCLUSIONS: No significant differences in the efficacy or toxicity of the three morphine PCA regimens were identified.     

VRCTC-310--a novel compound of purified animal toxins separates antitumor efficacy from neurotoxicity

Two purified animal venom toxins, crotoxin and cardiotoxin, have been combined to produce a unique natural product (VRCTC-310) currently under investigation as an antitumor agent by the National Cancer Institute. In vitro, it has demonstrated cytotoxic disease specificity and a unique mechanism of action when submitted to COMPARE analysis. In vivo, tolerance was developed to the neurotoxic properties of crotoxin which allowed comparison of several schedules of fixed and escalating daily i.m. doses to mice bearing s.c. Lewis Lung carcinoma. An 83% inhibition of tumor growth was achieved using an escalating dose schedule starting at 1.8 mg/kg and reaching 6.3 mg/kg/day on day 20. Although some irritation around the sites of i.m. injection was noted, animal weight loss was negligible and there were no other signs of adverse toxicity. This natural product represents a new, membrane interactive anticancer agent which produces a unique spectrum of cytotoxicity in vitro and which has demonstrated interesting in vivo antitumor efficacy.     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.     

Cost-effective smart power CMOS/DMOS technology: design methodology for latch-up immunity

To answer to the need of a cost effective smart power technology, an original design methodology that permits implementing latch-up free smart power circuits on a very simple CMOS/DMOS technology is proposed. The basic concept used to this purpose is letting float the wells of the MOS transistors most susceptible to initiate latch-up. The efficiency of the design methodology is experimentally shown.     

Catalytic behaviour and surface properties of supported lanthana

This paper deals with the role of dispersed lanthana as an active phase in several catalytic reactions: CO hydrogenation, CO oxidation, and oxidative dimerization of methane.

Characterization of the prepared catalysts indicates that lanthana can be effectively dispersed on silica and on ceria. While in the case of silica-supported catalysts lanthana appears at the surface, leading to an almost full coverage for loadings higher than 40%, in the case of ceria-based systems, lanthana forms a solid solution with the support.

In all the reactions studied, the presence of lanthana can be related to significant changes in the catalytic properties of the bare supports. Thus, the selectivity towards the total oxidation products observed on pure ceria is decreased, and the low activity shown by silica is enhanced. For the CO+H₂ reaction, the addition of lanthana also generates upgraded products.     

Analysis and optimization of weakly coupled thermoelastoplastic systems with applications to weldment design

A systematic approach for the design of weakly coupled thermoelastoplastic systems is presented. The Newton–Raphson iteration method is used in the solution process so that analytic design sensitivity formulations may be efficiently derived via the direct differentiation technique. The derived formulations are suitable for finite element implementations. Analysis and sensitivity analysis capabilities are combined with numerical optimization to form an optimum design algorithm. To demonstrate the algorithm, we optimally design a weldment with respect to manufacturing and service life aspects.