A comparison of emulsifiers for the formation of oil-in-water emulsions: stability of the emulsions within 9 h after production and MR signal properties

Objective

To provide a basis for the selection of suitable emulsifiers in oil-in-water emulsions used as tissue analogs for MRI experiments. Three different emulsifiers were investigated with regard to their ability to stabilize tissue-like oil-in-water emulsions. Furthermore, MR signal properties of the emulsifiers themselves and influences on relaxation times and ADC values of the aqueous phase were investigated.

Materials and methods

Polysorbate 60, sodium dodecyl sulfate (SDS) and soy lecithin were used as emulsifiers. MR characteristics of emulsifiers were assessed in aqueous solutions and their function as a stabilizer was examined in oil-in-water emulsions of varying fat content (10, 20, 30, 40, 50%). Stability and homogeneity of the oil-in-water emulsions were evaluated with a delay of 3 h and 9 h after preparation using T₁ mapping and visual control. Signal properties of the emulsifiers were investigated by ¹H-MRS in aqueous emulsifier solutions. Relaxometry and diffusion weighted MRI (DWI) were performed to investigate the effect of various emulsifier concentrations on relaxation times (T₁ and T₂) and ADC values of aqueous solutions.

Results

Emulsions stabilized by polysorbate 60 or soy lecithin were stable and homogeneous across all tested fat fractions. In contrast, emulsions with SDS showed a significantly lower stability and homogeneity. Recorded T₁ maps revealed marked creaming of oil droplets in almost all of the emulsions with SDS. The spectral analysis showed several additional signals for polysorbate and SDS. However, lecithin remained invisible in ¹H-MRS. Relaxometry and DWI revealed different influences of the emulsifiers on water: Polysorbate and SDS showed only minor effects on relaxation times and ADC values of aqueous solutions, whereas lecithin showed a strong decrease in both relaxation times (r_1,lecithin = 0.11 wt.%⁻¹ s⁻¹, r_2,lecithin = 0.57 wt.%⁻¹ s⁻¹) and ADC value (Δ(ADC)_lecithin =  − 0.18 × 10^–3 mm²/s⋅wt.%) with increasing concentration.

Conclusion

Lecithin is suggested as the preferred emulsifier of oil-in-water emulsions in MRI as it shows a high stabilizing ability and remains invisible in MRI experiments. In addition, lecithin is suitable as an alternative means of adjusting relaxation times and ADC values of water.

     

Industry 4.0: a supply chain innovation perspective

The Fourth Industrial Revolution – also known as Industry 4.0 (i4.0) – comprises the digitalisation of the industrial sector. This paper uses the theoretical lens of supply chain innovation (SCI) to investigate the implications of i4.0 on supply chain management. For these purposes, the method of structured content analysis is applied to more than 200 use cases of i4.0-enabled SCI introduced by both established and startup companies. i4.0-enabled SCI manifests along three dimensions: process, technology, and business architecture. The key findings of this study can be summarised as follows: first, i4.0-enabled SCI extends the initial focus on productivity improvements in SC processes towards scalability and flexibility. Second, extant i4.0 solutions rely mostly on analytics and smart things while omitting smart people technology and the human-centric approach associated with the i4.0 paradigm. Third, established companies adopt i4.0 merely to sustain their existing business architectures while startup companies radically change their operating models, relying heavily on data analytics and the platform economy. Consequently, established companies pursue a problem-driven, engineering-based approach to SCI while startup companies follow an ‘asset-light’, business-driven approach. Lastly, there are two distinct approaches to digitalising operational SC processes: platform-based crowdsourcing of standard processes and on-demand provision of customised services.     

Magnetic Resonance Signal Amplification by Reversible Exchange of Selective PyFALGEA Oligopeptide Ligands Towards Epidermal Growth Factor Receptors

The biorelevant PyFALGEA oligopeptide ligand, which is selective towards the epidermal growth factor receptor (EGFR), has been successfully employed as a substrate in magnetic resonance signal amplification by reversible exchange (SABRE) experiments. It is demonstrated that PyFALGEA and the iridium catalyst IMes form a PyFALGEA:IMes molecular complex. The interaction between PyFALGEA:IMes and H₂ results in a ternary SABRE complex. Selective 1D EXSY experiments reveal that this complex is labile, which is an essential condition for successful hyperpolarization by SABRE. Polarization transfer from parahydrogen to PyFALGEA is observed leading to significant enhancement of the ¹H NMR signals of PyFALGEA. Different iridium catalysts and peptides are inspected to discuss the influence of their molecular structures on the efficiency of hyperpolarization. It is observed that PyFALGEA oligopeptide hyperpolarization is more efficient when an iridium catalyst with a sterically less demanding NHC ligand system such as IMesBn is employed. Experiments with shorter analogues of PyFALGEA, that is, PyLGEA and PyEA, show that the bulky phenylalanine from the PyFALGEA oligopeptide causes steric hindrance in the SABRE complex, which hampers hyperpolarization with IMes. Finally, a single-scan ¹H NMR SABRE experiment of PyFALGEA with IMesBn revealed a unique pattern of NMR lines in the hydride region, which can be treated as a fingerprint of this important oligopeptide.     

Limited-trial Chase decoding

Chase decoders permit flexible use of reliability information in algebraic decoding algorithms for error-correcting block codes of Hamming distance d. The least complex version of the original Chase algorithms uses roughly d/2 trials of a conventional binary decoder, after which the best decoding result is selected as the final output. On certain channels, this approach achieves asymptotically the same performance as maximum-likelihood (ML) decoding. In this correspondence, the performance of Chase-like decoders with even less trials is studied. Most strikingly, it turns out that asymptotically optimal performance can be achieved by a version which uses only about d/4 trials.     

Retained fetal lung liquid in congenital lobar emphysema: a possible predictor of polyalveolar lobe

The purpose of this study was to determine whether retention of fetal lung liquid is more prevalent in polyalveolar congenital lobar emphysema than in conventional congenital lobar emphysema. Two patients with congenital lobar emphysema were prospectively identified in a 3-year period. Twenty-five such patients were identified in a retrospective study covering 39 years. Medical records were available for 22 patients who had 23 emphysematous lobes. Both babies from the prospective study and six subjects from the retrospective group had respiratory symptoms and underwent chest X-ray in the first day of life. Six of the eight babies with respiratory symptoms and chest imaging in the first day of life had retention of fetal lung liquid in an emphysematous lobe. All six of these lobes were polyalveolar. The lobe in one child was a polyalveolar lobe but without retained fetal lung liquid, and one child exhibited conventional lobar emphysema also without retained fetal lung liquid. One polyalveolar lobe caused no neonatal symptoms and was not imaged until the child was 3 months old. No baby with conventional lobar emphysema was shown to have retained fetal lung liquid. There seems to be a correlation between polyalveolar lobe and onset of respiratory symptoms in the first day of life. Retention of fetal lung liquid within the affected lobe was documented only in cases of polyalveolar lobe.     

Dynamic Complexity Theory Revisited

Dynamic complexity investigates the required effort to maintain knowledge about a property of a structure under changing operations. This article introduces a refined notion of dynamic problems which takes the initial structure into account. It develops the basic structural complexity notions accordingly. It also shows that the dynamic version of the LOGCFL-complete problem D₂LREACH(acyclic) can be maintained with first-order updates.     

Limits of the output power in Er3+:ZBLAN singlemodefibre lasers

The saturation of the 2.71 μm laser output has been measured in erbium-doped ZBLAN singlemode fibres with Er³⁺ concentrations of 1000, 5000 and 10000 ppm mol. Limits of the single-mode-laser output are discussed     

BRCA1 mutations in women attending clinics that evaluate the risk of breast cancer

BACKGROUND: To define the incidence of BRCA1 mutations among patients seen in clinics that evaluate the risk of breast cancer, we analyzed DNA samples from women seen in this setting and constructed probability tables to provide estimates of the likelihood of finding a BRCA1 mutation in individual families. METHODS: Clinical information, family histories, and blood for DNA analysis were obtained from 263 women with breast cancer. Conformation-sensitive gel electrophoresis and DNA sequencing were used to identify BRCA1 mutations. RESULTS: BRCA1 mutations were identified in 16 percent of women with a family history of breast cancer. Only 7 percent of women from families with a history of breast cancer but not ovarian cancer had BRCA1 mutations. The rates were higher among women from families with a history of both breast and ovarian cancer. Among family members, an average age of less than 55 years at the diagnosis of breast cancer, the presence of ovarian cancer, the presence of breast and ovarian cancer in the same woman, and Ashkenazi Jewish ancestry were all associated with an increased risk of detecting a BRCA1 mutation. No association was found between the presence of bilateral breast cancer or the number of breast cancers in a family and the detection of a BRCA1 mutation, or between the position of the mutation in the BRCA1 gene and the presence of ovarian cancer in a family. CONCLUSIONS: Among women with breast cancer and a family history of the disease, the percentage with BRCA1 coding-region mutations is less than the 45 percent predicted by genetic-linkage analysis. These results suggest that even in a referral clinic specializing in screening women from high-risk families, the majority of tests for BRCA1 mutations will be negative and therefore uninformative.