Stabilization of femtosecond mode-locked Ti:sapphire laser forhigh-accuracy pulse interferometry

We propose a method of long-term stabilization of the repetition rate and the spectral envelope in a femtosecond mode-locked (fs-ML) laser pulse by a simple control method without modifying the laser cavity configuration. The effectiveness of the repetition-rate-stabilized fs-ML laser was evaluated in a long-optical-path (LOP) pulse interferometer with a short reference arm. The resulting accuracy in the LOP pulse interferometer was improved to one-seventh that of a free-running fs-ML laser. Moreover, the stabilization of the spectral envelope was estimated to suppress the fluctuation in the phase and group indices of an object under testing by 1/50, which can increase the measurement accuracy in pulse interferometry. The simple and practical stabilization method provides a means to increase the application of pulse interferometry using the fs-ML laser     

Smart polyion complex micelles for targeted intracellular delivery of PEGylated antisense oligonucleotides containing acid-labile linkages

A novel pH-sensitive and targetable antisense ODN delivery system based on multimolecular assembly into polyion complex (PIC) micelles of poly(L-lysine) (PLL) and a lactosylated poly(ethylene glycol)-antisense ODN conjugate (Lac-PEG-ODN) containing an acid-labile linkage (beta-propionate) between the PEG and ODN segments has been developed. The PIC micelles thus prepared had clustered lactose moieties on their peripheries and achieved a significant antisense effect against luciferase gene expression in HuH-7 cells (hepatoma cells), far more efficiently than that produced by the nonmicelle systems (ODN and Lac-PEG-ODN) alone, as well as by the lactose-free PIC micelle. In line with this pronounced antisense effect, the lactosylated PIC micelles showed better uptake than the lactose-free PIC micelles into HuH-7 cells; this suggested the involvement of an asialoglycoprotein (ASGP) receptor-mediated endocytosis process. Furthermore, a significant decrease in the antisense effect (27 % inhibition) was observed for a lactosylated PIC micelle without an acid-labile linkage (thiomaleimide linkage); this suggested the release of the active (free) antisense ODN molecules into the cellular interior in response to the pH decrease in the endosomal compartment is a key process in the antisense effect. Use of branched poly(ethylenimine) (B-PEI) instead of the PLL for PIC micellization led to a substantial decrease in the antisense effect, probably due to the buffer effect of the B-PEI in the endosome compartment, preventing the cleavage of the acid-labile linkage in the conjugate. The approach reported here is expected to be useful for the construction of smart intracellular delivery systems for antisense ODNs with therapeutic value.     

The effect of thickness on the steady-state creep properties of freestanding aluminum nano-films

To clarify the effects of film thickness on the creep properties of nano-films we conducted tensile creep experiments on freestanding aluminum films with thickness values in the range ～100–800 nm at room temperature. The nano-films showed typical creep behavior comprising transient, steady-state, and accelerated creep stages. The steady-state creep exponents of the 100–800 nm thick specimens were 0.84–2.7 in the stress range 30–120 MPa, which are close to the value for diffusion creep (1). Creep deformation clearly shows a thickness effect: the steady-state creep rate increases as the thickness decreases from 800 to 400 nm, shows a peak in the range 400–200 nm, and then decreases in the 200–100 nm thickness range. The creep experiments under a small stress of 1 MPa show a negative strain rate, indicating the presence of a driving force to reduce the surface area due to surface tension. The explanation for the thickness effect is as follows. Since the ratio of surface and grain boundary area to volume increases with decreasing thickness, diffusion creep along these paths is enhanced, resulting in an increase in the creep rate. As the thickness decreases to 200–100 nm, however, the surface tension effect to reduce the surface area becomes dominant, decreasing the creep rate. In addition, the creep rate of the nano-films is about two or three orders of magnitude smaller than that of the bulk material dominated by the dislocation creep mechanism.     

Determination of urine saturation with computer program EQUIL 2 as a method for estimation of the risk of urolithiasis

Two measures of weight cycling and indexes of psychological functioning were examined in a large sample of dieters. History of weight cycling was assessed to include number of dieting attempts, total lifetime weight lost and regained, and number of weight cycles over 20 lb (9.1 kg). Experience of weight cycling measured perception of being a yo-yo dieter and perceived success at maintaining past weight losses. Experience was more strongly related than history to all psychological measures. Further, when controlling for the effects of age, body mass index, and experience, the relation between history and the psychological variables was nonsignificant. This finding suggests that an individual's perception of being a weight cycler may be more related to psychological problems than the actual number of pounds lost and regained over time.     

Osteoclast differentiation and characteristic trabecular bone formation during growth plate destruction in osteoprotegerin-deficient mice

Osteoprotegerin (OPG) is an osteoblast-derived secreted member of the tumour necrosis factor receptor superfamily that inhibits osteoclastogenesis. Mice that are OPG-deficient have severe bone loss, including growth plate cartilage destruction. Using OPG-deficient mice as a useful animal model, we attempted to clarify differentiation and ultrastructural features of osteoclasts located on destructed growth plate cartilage and trabecular bone matrix. In the humerus and femur of OPG homozygous (-/-) mice, adjacent to the growth plate cartilage, bone trabeculae without a calcified cartilage core were characteristically formed at the metaphyseal side of the medullary cavity, which resulted in an irregular chondrocyte distribution and arrangement in growth plate cartilage. During growth plate cartilage destruction, osteoclasts positive for tartrate-resistant acid phosphatase showed unusual localization on both type-II collagen-positive cartilage and type-I collagen-positive trabecular bone matrix at the ossification centre of the epiphyseal/metaphyseal border. Although multinucleated osteoclasts were distributed within open lacunar canals in the growth plate, those on uncalcified cartilage matrix lacked a ruffled border. Facing the calcified cartilage matrix within lacunar canals, osteoclasts showed irregularly formed ruffled borders. After growth plate destruction, a thin bone layer was deposited on the remaining cartilage surfaces by invading osteoblasts. Osteoclasts formed prominent ruffled border structures on bone matrix, deposited on the remaining growth plate cartilage. These results suggest that, in OPG (-/-) mice, terminal osteoclast differentiation requires the presence of newly produced bone matrix, as the coupled phenomenon of bone formation and resorption, as well as osteoblast-derived cytokines.     

Photoactivable Elimination of Tumorigenic Human Induced Pluripotent Stem Cells by Using a Lectin–Doxorubicin Prodrug Conjugate

Human pluripotent stem cells (hPSCs) are attractive resources for regenerative medicine, but medical applications are hindered by their tumorigenic potential. Previously, a hPSC-specific lectin probe, rBC2LCN, was identified through comprehensive glycome analysis by using high-density lectin microarrays. Herein, a lectin–doxorubicin (DOX) prodrug conjugate, with controllable photolysis activation for the elimination of tumorigenic human induced pluripotent stem cells, has been developed. rBC2LCN was fused with a biotin-binding protein, tamavidin (BC2Tama), and the fusion protein was expressed in Escherichia coli and purified by means of affinity chromatography. BC2Tama was then conjugated with doxorubicin-photocleavable biotin (DOXPCB). The BC2Tama–DOXPCB conjugates were observed to bind to hPSCs followed by internalization. Upon exposure to ultraviolet light, DOX was released inside the cells, which allowed specific killing of the hPSCs. Thus, BC2Tama–DOXPCB should be useful for the targeted elimination of hPSCs contained in hPSC-derived cell therapy products. This is the first report of the generation of lectin–prodrug conjugates. BC2Tama should be applicable for the targeted delivery of various types of biotinylated compounds into hPSCs.     

Pore structure of carbons coated on ceramic particles

Pore structure of carbon coated on ceramic particles by carbonization of precursor in a powder mixture at 900 °C was studied by focusing on the effects of substrate ceramics (MgO, TiO₂ and various phases of Al₂O₃) and of carbon precursor (poly(vinyl alcohol) (PVA), poly(ethylene terephthalate) (PET) and hydroxyl propyl cellulose (HPC)). By dissolving substrate MgO particles, carbon coated was found to have a high BET surface area, more than 1000 m²/g, which was almost the same as the value estimated from apparent surface area measured on carbon-coated MgO particles under the assumption of zero surface area of the substrate. The carbon separated was found to be rich in micropores from the analyses by DFT method and α_s plot. The dependence of the BET surface area on the amount of carbon coated on TiO₂ with a high surface area was the same for three carbon precursors, although the carbon yields from the precursors were slightly different. Porous Al₂O₃ substrates, γ-Al₂O₃as-received and that formed from Al(OH)₃ during carbonization, gave a high BET surface area, but dense Al₂O₃, α-Al₂O₃, gave a low surface area.     

Geometrical analysis and design of a motion transmitting element for mobile vehicles

The range of speed or torque of motors is limited to some degree. Industrial vehicles working in factories are required to output a large force when they carry loads, and also to move with high velocity when they move to their destination. However, it is impossible to realize both those requirements if a conventional reduction device is used. Velocity variation devices using gears are widely used to change the velocity ratio between the input and output shafts. However, the motion transmission from the input shaft to the output shaft is interrupted during the velocity ratio variation process. In order to solve this problem, a velocity variation method that can transmit motion continuously is proposed, in which a motion transmitting element is used. In this report, a motion transmitting element using the geometrical analysis method is proposed, a method of expressing the curve using dispersed points is proposed, and a method of calculating the inclination and the distances along the curve is developed. Based on the proposed methods, the geometrical form of the transmitting element is analyzed.