Effects of nondensifying inclusions on the densification and microstructure of zinc oxide matrix composites

The densification and microstructure development of ZnO containing Zn₇Sb₂O₁₂, ZrO₂, and aggregated ZnO were investigated to elucidate the effect of nondensifying inclusions on the sintering of ceramic/ceramic composites. The inclusion retarded the densification, and the degree of retardation was found to depend on the chemical species of inclusion; Zn₇Sb₂O₁₂ had the largest effect, followed by ZrO₂ and then aggregated ZnO last. The experimental results for aggregated ZnO was explained by the theory which predicts the generation of backstresses. The backstresses give a less significant effect on the densification. For Zn₇Sb₂O₁₂ and ZrO₂, the microstructure of the matrix varied with distance from an inclusion particle; much porosity was observed in the region surrounding the inclusion. Circumferential voids, which are responsible for the suppression of densification, form during the initial stage of sintering. Inclusion particles generate an anchoring effect which retards the densification of the matrix immediately surrounding the inclusion particle during the intermediate stage.Supported by the Inamori Foundation.     

Finite element analysis of the transient motion of stratified viscous fluids under gravity

The present paper deals with the finite element analysis of two-dimensional two-layer density flows in a gravitational field. A fluid in each layer is replaced with a large number of discrete particles, and the motion and deformation of each layer is represented by moving those particles in a Lagrangian manner. The velocity distribution in the whole fluid region is given as the finite element solution of the Navier-Stokes equations and the equation of continuity. In the finite element calculation, free-slip conditions are used on solid wall boundaries because no-slip conditions may cause sticking of some particles to walls. Then, a new technique for the implementation of free-slip conditions on arbitrary curved boundaries is presented. As numerical examples, density flows in a rectangular closed container and Rayleigh-Taylor instability in the container with a circular cross-section have been computed.     

Wood adhesives based on tannin extracts from barks of some pine and spruce species

Barks available in commercial quantities in Australia and overseas have been examined for their efficacy as raw materials for conversion to high quality adhesives for reconstituted wood products. Previously bark from maturePinus radiata was found to be suitable. This paper examines the suitability of barks from four mature pine species (Pinus caribaea, Pinus elliottii, Pinus pinaster andPinus sylvestris), one young pine species (Pinus radiata) and one spruce species (Picea abies). Only the bark extracts ofPinus caribaea andPinus pinaster gave high quality (Type A bond, WBP) wood adhesives. The gluing properties of the adhesives derived from the extracts appeared to be dependent on their contents of formaldehyde-reactive polyflavanoids as indicated by their Stiasny values, with a value of 65% being the minimum for producing a high quality adhesive by the methods used.     

Mechanical stretch induces hypertrophic responses in cardiac myocytes of angiotensin II type 1a receptor knockout mice

Many lines of evidence have suggested that angiotensin II (AngII) plays an important role in the development of cardiac hypertrophy through AngII type 1 receptor (AT1). To determine whether AngII is indispensable for the development of mechanical stress-induced cardiac hypertrophy, we examined the activity of mitogen-activated protein kinase (MAPK) family and the expression of the c-fos gene as hypertrophic responses after stretching cultured cardiac myocytes of AT1a knockout (KO) mice. When cardiac myocytes were stretched by 20% for 10 min, extracellular signal-regulated protein kinases (ERKs) were strongly activated in KO cardiomyocytes as well as wild type (WT) myocytes. Both basal and stimulated levels of ERKs were higher in cardiomyocytes of KO mice than in those of WT mice. Activation of another member of the MAPK family, p38(MAPK), and expression of the c-fos gene were also induced by stretching cardiac myocytes of both types of mice. An AT1 antagonist attenuated stretch-induced activation of ERKs in WT cardiomyocytes but not in KO cardiomyocytes. Down-regulation of protein kinase C inhibited stretch-induced ERK activation in WT cardiomyocytes, whereas a broad spectrum tyrosine kinase inhibitor (genistein) and selective inhibitors of epidermal growth factor receptor (tyrphostin, AG1478, and B42) suppressed stretch-induced activation of ERKs in KO cardiac myocytes. Epidermal growth factor receptor was phosphorylated at tyrosine residues by stretching cardiac myocytes of KO mice. These results suggest that mechanical stretch could evoke hypertrophic responses in cardiac myocytes that lack the AT1 signaling pathway possibly through tyrosine kinase activation.     

A novel gait generation method independent of target settling-time adjustment for underactuated limit cycle walking

This paper proposes a novel gait generation method for surely achieving constraint on impact posture in limit cycle walking. First, we introduce an underactuated rimless wheel model without ankle-joint actuation and formulate a state-space realization of the control output using the stance-leg angle as a time parameter through an input–output linearization. Second, we determine a control input that moves the control output to a terminal value at a target stance-leg angle during the single-support phase. Third, we conduct numerical simulations to observe the fundamental gait properties and discuss the relationship between the gait symmetry and mechanical energy restoration. Furthermore, we mathematically prove the asymptotic stability of the generated walking gait by analytically deriving the restored mechanical energy.     

A novel interferon regulatory factor family transcription factor, ICSAT/Pip/LSIRF, that negatively regulates the activity of interferon-regulated genes

We have isolated a novel cDNA clone encoding interferon (IFN) consensus sequence-binding protein in adult T-cell leukemia cell line or activated T cells (ICSAT); this protein is the human homolog of the recently cloned Pip/LSIRF. ICSAT is structurally most closely related to the previously cloned ICSBP, a member of the IFN regulatory factor (IRF) family of proteins that binds to interferon consensus sequences (ICSs) found in many promoters of the IFN-regulated genes. Among T-cell lines investigated, ICSAT was abundantly expressed in human T-cell leukemia virus type 1 (HTLV-1)-infected T cells. When the HTLV-1 tax gene was expressed or phorbol myristake acetate-A23187 stimulation was used, ICSAT expression was induced in Jurkat cells which otherwise do not express ICSAT. When the binding of ICSAT to four different ICSs was tested, the relative differences in binding affinities for those ICSs were determined. To study the functional role of ICSAT, we performed cotransfection experiments with the human embryonal carcinoma cell line N-Tera2. ICSAT was demonstrated to possess repressive function over the gene activation induced by IFN stimulation or by IRF-1 cotransfection. Such repressive function is similar to that seen in IRF-2 or ICSBP. However, we have found that ICSAT has a different repressive effect from that of IRF-2 or ICSBP in some IFN-responsive reporter constructs. These results suggest that a novel mechanism of gene regulation by "differential repression" is used by multiple members of repressor proteins with different repressive effects on the IFN-responsive genes.     

High-performance cone beam reconstruction using CUDA compatible GPUs

Compute unified device architecture (CUDA) is a software development platform that allows us to run C-like programs on the nVIDIA graphics processing unit (GPU). This paper presents an acceleration method for cone beam reconstruction using CUDA compatible GPUs. The proposed method accelerates the Feldkamp, Davis, and Kress (FDK) algorithm using three techniques: (1) off-chip memory access reduction for saving the memory bandwidth; (2) loop unrolling for hiding the memory latency; and (3) multithreading for exploiting multiple GPUs. We describe how these techniques can be incorporated into the reconstruction code. We also show an analytical model to understand the reconstruction performance on multi-GPU environments. Experimental results show that the proposed method runs at 83% of the theoretical memory bandwidth, achieving a throughput of 64.3 projections per second (pps) for reconstruction of 512³-voxel volume from 360 512²-pixel projections. This performance is 41% higher than the previous CUDA-based method and is 24 times faster than a CPU-based method optimized by vector intrinsics. Some detailed analyses are also presented to understand how effectively the acceleration techniques increase the reconstruction performance of a naive method. We also demonstrate out-of-core reconstruction for large-scale datasets, up to 1024³-voxel volume.     

Chemical vapor deposition of SiO2 films by TEOS/O2 supermagnetron plasma

A TEOS/O₂ supermagnetron double electrode plasma system was used to deposit SiO₂ films. Deposition rates were measured as a function of rf power and substrate stage temperature. With an increase of rf power on both electrodes from 40 to 80W, the deposition rate increased; however, with a further increase of rf power from 80 to 120W, the deposition rate ceased to increase or decreased only a small amount. The presence of O-H bonds from bonded water in the film was evaluated using buffered HF (BHF) etching solution. With an increase of rf power from 40 to 120W, the BHF etch rate decreased; i.e., the number of O-H bonds were reduced. A minimum BHF etch rate was observed at a rf phase difference of 180° between the two rf power sources. A SiO₂ film was deposited on a trench-patterned quartz substrate. A flat surface SiO₂ layer with air gaps (voids) was formed on the high-aspect ratio (depth/width=1.5-2) trench area.