Effects of the thermal history on the hydraulic properties of slags

Glasses with two composition in the CaO---Al₂O₃---SiO₂ system were prepared with different cooling conditions. Glass A has a eutectic composition of wollastonite-gehlenite-rankinite and glass B has that of wollastonite-gehlenite-anorthite. The effects of the thermal history on the structure and hydraulic properties were discussed. Effects of cooling rate on the physical and chemical properties of glasses are found to be different with chemical composition of glass. Cooling rate affects the hydraulic reactivity and crystallization temperature, especially in glass A, but scarcely affects the physical properties such as chemical shift of AlK and surface basicity of the glass.     

Arterial embalming method of the cadaver and its application to research

Ever since 1974, the cadaver has been embalmed by the arterial embalming method, using pre-embalming fluid with blood clot disperser and cell conditioner for the removal of blood clots and drainage of blood, at the Department of Anatomy of the Kawasaki Medical School. According to this method, the cadavers are always very well fixed so that they can be used for not only anatomical dissection but also research for the vascular system by vasography, kinematics of the joint and other histologic examinations. In this report we have described our embalming procedure concretely and its application to research.     

Development of a fast neutron radiography converter using wavelength-shifting fibers

A fluorescent converter for fast neutron radiography (FNR) comprising a scintillator and hydrogen-rich resin has been developed and applied to electronic imaging. The rate of the reaction between fast neutrons and the converter is increased by thickening the converter, but its opaqueness attenuates emitted light photons before they reach its surface. To improve the luminosity of a fluorescent converter for FNR, a novel type of converter was designed in which wavelength-shifting fibers were adopted to transport radiated light to the observation end face. The performance of the converter was compared with that of a polypropylene-based fluorescent converter in an experiment conducted at the fast-neutron-source reactor YAYOI in the University of Tokyo.     

Effect of arginine vasopressin (AVP) inhibitor in the inhibition of the peritumoral edema

BACKGROUND: Major depressive disorder is often marked by repeated episodes of depression. We describe recovery from major depression across multiple mood episodes in patients with unipolar major depression at intake and examine the association of sociodemographic and clinical variables with duration of illness. METHODS: A cohort of 258 subjects treated for unipolar major depressive disorder was followed up prospectively for 10 years as part of the Collaborative Depression Study, a multicenter naturalistic study of the mood disorders. Diagnoses were made according to the Research Diagnostic Criteria, and the course of illness was assessed with the Longitudinal Interval Follow-up Evaluation. Survival analyses were used to calculate the duration of illness for the first 5 recurrent mood episodes after recovery from the index episode. RESULTS: Diagnosis remained unipolar major depressive disorder for 235 subjects (91%). The median duration of illness was 22 weeks for the first recurrent mood episode, 20 weeks for the second, 21 weeks for the third, and 19 weeks for the fourth and fifth recurrent mood episodes; the 95% confidence intervals were highly consistent. From one episode to the next, the proportion of subjects who recovered by any one time point was similar. For subjects with 2 or more recoveries, the consistency of duration of illness from one recovery to the next was low to moderate. None of the sociodemographic or clinical variables consistently predicted duration of illness. CONCLUSION: In this sample of patients treated at tertiary care centers for major depressive disorder, the duration of recurrent mood episodes was relatively uniform and averaged approximately 20 weeks.     

Properties of networks obtained by internal plasticization of epoxy resin with aromatic and aliphatic glycidyl compounds

In order to improve the fracture properties of p, p′-diaminodiphenylmethane-cured epoxy resin, various kinds of aromatic and aliphatic glycidyl compounds were investigated as a modifier at an amount of 30 wt %. Several compounds promoted the fracture toughness. In any glycidyl compounds, however, heat resistance was decreased by the modification. The dynamic mechanical properties of the modified epoxy resins were measured. The crosslinking density ρ was calculated from the theory of rubber elasticity, and the mechanical properties of the resins were discussed in regard to the crosslinking density. Tensile strength was scarcely affected by the crosslinking density. Elongation at break and Izod impact strength increased remarkably with decrease in crosslinking density. The fracture toughness K_Ic- increased with decrease in crosslinking density except at small ρ.     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Toward a human-like biped robot with compliant legs

Conventional models of bipedal walking generally assume rigid body structures, while elastic material properties seem to play an essential role in nature. On the basis of a novel theoretical model of bipedal walking, this paper investigates a model of biped robot which makes use of minimum control and elastic passive joints inspired from the structures of biological systems. The model is evaluated in simulation and a physical robotic platform by analyzing the kinematics and ground reaction force. The experimental results show that, with a proper leg design of passive dynamics and elasticity, an attractor state of human-like walking gait patterns can be achieved through extremely simple control without sensory feedback. The detailed analysis also explains how the dynamic human-like gait can contribute to adaptive biped walking.     

Fabrication of piezoelectric multilayer thin-film actuators

In this study, we fabricated multilayer ceramics (MLCs) composed of multilayered Pb(Zr,Ti)O₃ (PZT) piezoelectric thin films with internal electrodes and evaluated their dielectric and piezoelectric properties. The stack of PZT ferroelectric layers (550 nm) and SrRuO₃ (SRO, 80 nm) electrodes were alternatively deposited on Pt/Ti-coated silicon-on-insulator substrates by radio-frequency magnetron sputtering. The MLCs composed of one, three, and five PZT layers were fabricated by the alternate sputtering deposition of PZT ferroelectric layers and SRO electrodes through the movable shadow mask. The capacitances of MLCs were proportionally increased with the number of PZT layers, while their relative dielectric constants were almost same among the each MLC. The MLCs exhibited symmetric and saturated P–E hysteresis loops similar to the conventional PZT thin films. We estimated that the piezoelectric properties of MLCs by FEM simulation, and confirmed that the effective transverse piezoelectric coefficients (d _31,eff ) increased with the number of PZT layers. The piezoelectric coefficients calculated to be d _31,eff  = ?2964 pC/N at 25 PZT layers, which is much higher than those of conventional single-layer piezoelectric thin films.     

Temperature-controlled molecular dynamics study on velocity-dependent threshold behavior of dynamic nano-friction

Laws of dynamic nano-friction (i.e., continuous wearless friction) were searched for under steady spatial distributions of the local quasi-temperature, by molecular dynamics (MD) simulations. The temperature control of the non-conservative model was carried out by extending the isothermal MD method using the Nosé–Poincaré thermostat. The results suggested that the threshold phenomenon characterizes sliding-velocity dependence of the nano-frictional force between crystal lattices constituting a nano-electromechanical system (NEMS). This phenomenon was turned out to be a universal feature, whether heat transfer to the environment exists or not.     

Magnetic Behavior of Some Rare-Earth Transition-Metal Perovskite Oxide Systems

Magnetic properties were investigated for the rare-earth 3d-transition metal oxides with the perovskite structure. Intriguing magnetic phenomena were reviewed for a few systems:magnetization peak effect in the titanates, magnetization reversal in the chromites and metallic ferromagnetism in the cobahites. The results suggest an important role of the rare-earth ions for the magnetic properties of such complex oxides.