Application of supercritical fluid chromatography in the quantitative analysis of minor components (carotenes,vitamin E,sterols, and squalene) from palm oil

The application of supercritical fluid chromatography (SFC) coupled with a UV variable-wavelength detector to isolate the minor components (carotenes, vitamin E, sterols, and squalene) in crude palm oil (CPO) and the residual oil from palm-pressed fiber is reported. SFC is a good technique for the isolation and analysis of these compounds from the sources mentioned. The carotenes, vitamin E, sterols, and squalene were isolated in less than 20 min. The individual vitamin E isomers present in palm oil were also isolated into their respective components, α-tocopherol, α-tocotrienol, γ-tocopherol, γ-tocotrienol, and δ-tocotrienol. Calibration of all the minor components of palm as well as the individual components of palm vitamin E was carried out and was found to be comparable to those analyzed by other established analytical methods.     

Rapid synthesis of palm-based monoacylglycerols

Rapid synthesis of high-purity MAG from refined, bleached, and deodorized palm stearin (RBDPS) via chemical glycerolysis in the presence of pyridine was developed to obviate the conventional molecular distillation in the production of pure MAG. The optimal reaction for the sodium methoxide-catalyzed glycerolyis of RBDPS was recorded at 110°C using a 3 wt% catalyst concentration based on the weight of RBDPS, with an RBDPS/glycerol ratio of 1∶2 and an RBDPS/pyridine ratio of 1∶4. High yields of over 99% were achieved rapidly in 15 min, and increases in DAG and FFA were observed after a prolonged reaction time.     

Uncovering Global Icebergs in Distributed Streams: Results and Implications

Discovering icebergs in distributed streams of data is an important problem for a number of applications in networking and databases. While previous work has concentrated on measuring these icebergs in the non-distributed streaming case or in the non-streaming distributed case, we present a general framework that allows for distributed processing across multiple streams of data. We compare several of the state-of-the-art streaming algorithms for estimating local elephants in the individual streams. However, since an iceberg may be hidden by being distributed across many different streams, we add a sampling component to handle such cases. We provide a novel taxonomy of current sketches and perform a thorough analysis of the strengths and weaknesses of each scheme under various QoS metrics, using both real and synthetic Internet trace data. We summarize their performance and discuss the implications for the future design of sketches.     

Effect of Multi-Wall Carbon Nanotubes on the Mechanical Properties of Natural Rubber

Multi-walled carbon nanotubes (MWNTs) were used to prepare natural rubber (NR) nanocomposites. Our first efforts to achieve nanostructures in MWNTs/NR nanocomposites were formed by incorporating carbon nanotubes in a polymer solution and subsequently evaporating the solvent. Using this technique, nanotubes can be dispersed homogeneously in the NR matrix in an attempt to increase the mechanical properties of these nanocomposites. The properties of the nanocomposites such as tensile strength, tensile modulus, elongation at break and hardness were studied. Mechanical test results show an increase in the initial modulus for up to 12 times in relation to pure NR. In addition to mechanical testing, the dispersion state of the MWNTs into NR studied by Transmission Electron Microscopy (TEM) in order to understand the morphology of the resulting system     

Autoregressive Wiener filtering in a scanning electron microscopy imaging system

In this paper, we propose to use the autoregressive (AR)-based interpolator with Wiener filter and apply the idea to scanning electron microscope (SEM) images. The concept for combining the AR-based interpolator with Wiener filtering comes from the essential requirement of Wiener filtering for accurate and consistent estimation of the power of the noise in images prior to filter implementation. The resultant filter is called AR-Wiener filter. The proposed filter is embedded onto the frame grabber card of the scanning electron microscope (SEM) for real-time image processing. Different images are captured using SEM and used to compare the performances of the conventional Wiener and the proposed AR-Wiener technique.     

The preparation,characterization and photocatalytic activity of radical-shaped CeO2/ZnO microstructures

This paper uses a wet-chemical precipitation route to prepare radical-shaped ZnO microprisms and to deposit Cerium oxide (CeO₂) on the surface of ZnO, to form CeO₂/ZnO microstructures. The samples are characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy. Their catalytic activity is also evaluated using methylene blue (MB) as a detection reagent. CeO₂/ZnO systems exhibit higher UV absorption and transparency in the visible region. The experimental results show that the deposition of CeO₂ nanospecies is successful and that the radical-shaped microstructures of ZnO are well maintained. The CeO₂/ZnO microstructures exhibit a much greater intensity of UV-light absorptivity and much higher photocatalytic activity than those of radical-shaped ZnO microprisms.     

Drying Kinetics,Texture, Color,and Determination of Effective Diffusivities During Sun Drying of Chempedak

Sun drying of chempedak (Artocarpus integer) was carried out on different sample sizes to investigate the effects on product quality. Fick's second law model was used to determine the effective diffusivities of sun–dried chempedak slabs based on the drying rate versus moisture content plots. In addition, texture degradation and total color changes were investigated. The texture and color changes of dried chempedak were relatively significant (p < 0.05) compared to fresh chempedak. There was an increase in dried fruit hardness and chewiness but a decrease in springiness and cohesiveness during drying.     

Rigid Polyurethane Foam Production from Palm Oil-Based Epoxidized Diethanolamides

A new type of rigid polyurethane foam was produced by incorporating oxazolidone heterocyclic rings on to polyurethane backbones. Epoxidized diethanolamides were synthesized by reacting palm oil blends of epoxidized palm olein and refined bleached deodorized palm kernel olein with diethanolamine to produce rigid polyurethane foams. Epoxides, retained in the diethanolamides, reacted with isocyanate during foam production in the presence of AlCl₃–THF complex catalyst to form oxazolidone linkages in the polyurethane network. The carbonyl stretch of oxazolidone was identified at 1,750 cm⁻¹ through Fourier Transform Infra Red analysis. Chemical modifications of the polyurethane network also improved the thermal and mechanical properties of the foams. In addition, isocyanate index 1.4 was determined to be the most suitable in the production of foams from this newly synthesized epoxidized diethanolamides.     

Simultaneous quantification of free fatty acids,free sterols,squalene, and acylglycerol molecular species in palm oil by high-temperature gas chromatography-flame ionization detection

This paper discusses a rapid GC-FID technique for the simultaneous quantitative analysis of FFA, MAG, DAG, TAG, sterols, and squalene in vegetable oils, with special reference to palm oil. The FFA content determined had a lower SE compared with a conventional titrimetric method. Squalene and individual sterols, consisting of β-sitosterol, stigmasterol, campesterol, and cholesterol, were accurately quantified without any losses. This was achieved through elimination of tedious conventional sample pretreatments, such as saponification and preparative TLC. With this technique, the separation of individual MAG, consisting of 16∶0, 18∶0, and 18∶1 FA, and the DAG species, consisting of the 1,2(2,3)- and 1,3-positions, was sufficient to enable their quantification. This technique enabled the TAG to be determined according to their carbon numbers in the range of C₄₄ to C₅₆. Comparisons were made with conventional methods, and the results were in good agreement with those reported in the literature.