Effect of enzymatic hydrolysis of proteins on growth of Bifidobacterium bifidus in milk

The effect of enzymatic hydrolysis of proteins in milk using neutrase on the growth of the probiotic strain Bifidobacterium bifidus was evaluated by estimation of microbial growth, acidity, viscosity and flavour production. A significant increase in the growth of B bifidus was observed in neutrase‐hydrolysed milk. The setting time of bifidus‐cultured milk was advanced by about 12 h at 5% degree of hydrolysis. Enzymatic hydrolysis of proteins prior to cultivation also significantly increased the viscosity of the product. An approximately 60% increase in viscosity of the product was observed in neutrase‐hydrolysed milk. Production of steam‐volatile monocarbonyls as an indication of development of flavour was also higher in neutrase‐hydrolysed milk. The concentration of steam‐volatile monocarbonyls was 2.47 µmol per 100 ml in neutrase‐hydrolysed milk but only 1.84 µmol per 100 ml in control milk at the setting point of the curd. © 2002 Society of Chemical Industry     

Sustainable Synthesis of Biaryls Using Silica Supported Ferrocene Appended N-Heterocyclic Carbene-Palladium Complex

Catalysis Letters - A novel silica supported ferrocene appended N-heterocyclic carbene-palladium complex (SilFemBenzNHC@Pd) has been prepared and characterized by using fourier transform infrared...     

Influence of Ball Burnishing Process on Equal Channel Angular Pressed Mg-Zn-Si Alloy on the Evolution of Microstructure and Corrosion Properties

Silicon - In the present study, Mg-4Zn-1Si alloy was subjected to equal channel angular pressing (ECAP) up to 4 passes at 300 °C, followed by ball burnishing using 0.3 mm...     

Surveillance of Drinking Water Quality for Safe Water Supply—A Case Study from Shillong,India

To ascertain the quality of drinking water being supplied and maintained, it is necessary to conduct water quality surveillance for evolving suitable strategy for future planning. In the present investigation, water quality was monitored in treatment plants, service reservoirs, and at consumer ends in three seasons to assess the baseline water quality status at Shillong in Meghalaya. There are three water treatment plants at Shillong namely Umkhen, Mawlai and GSWS with design capacities of 1.5, 3.4 and 34 Million liter per day (MLD) respectively. Each treatment plant is having rapid sand filtration followed by disinfection. The study reveals that the physico-chemical parameters of water quality at consumer end meets Indian drinking water quality standards (BIS 1991) after conventional treatment followed by disinfection, whereas the bacteriological parameters for raw water sources exceed the permissible limit indicating the treatment need for drinking purposes. Throughout year the average feacal coliform contamination at service reservoir and to consumer end were found as 44 to 156 CFU/100 ml which may be attributed to the general management practices for maintenance of service reservoirs and the possibility of en route contamination.     

Nanoparticle effects on the morphology and mechanical properties of polypropylene spunbond webs

We report morphology and mechanical properties of natural nanoclay incorporated spunbond polypropylene composite webs. Nanocomposite spunbond webs were produced with up to 5 wt % natural nanoclay additives on Reicofil®‐2 spunbond line. Influence of nanoclay on the resin rheological properties, processibility, and mechanical properties of webs were studied. Wide angle X‐ray diffraction and transmission electron microscopy analysis were used to investigate the nanocomposite morphology. Intercalated and flocculated morphology was observed for all the concentrates and for all the spunbond fiber webs. The microstructure and polymer morphology in the presence of additives was characterized using a polarized optical microscope. At higher percentage, excess clay platelets were excluded out of the spherulite boundaries. About 20–30% increase in tear strength was observed for webs with up to 2 wt % nanoclay additives. Compared with the control polypropylene spunbond web, nanoclay reinforced samples showed better dimensional stability. Different failure mode was observed for spunbond webs with additives. Spunbond webs with even as low as 1 wt % clay retain their morphology and integrity in bond point after thermal bonding. Nanoclay incorporated spunbond webs showed significant improvements in the stiffness. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Role of additives; sodium dodecyl sulphate and manganese chloride on morphology of Zn1−xMnxO nanoparticles and their photoluminescence properties

In the present study Zn_1−xMn_xO (x = 0, 0.05 and 0.1) nanoparticles (NPs) have been synthesised in aqueous solution phase at mild reaction temperature 100 °C in moderate alkaline medium (pH = 9.5), and the role of external additives; like sodium dodecyl sulphate and manganese chloride on the morphology and size of the products has been explored on the basis of transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectral analyses data. ZnO hexagonal nano-plates, core–shell like spherical/ellipsoidal Zn_0.95Mn_0.05O structures and thin sheets, thorn/needle mixed shaped Zn_0.9Mn_0.1O structures have been observed in TEM and SEM images. Zn(OH)₂ formed in moderate alkaline medium, converted to Zn(II) hydroxo complex ions on dissolution, which further recrystallizes to produce wurtzite ZnO at 100 °C. From XRD and EDX analysis, successful doping of Mn²⁺ ions at the Zn²⁺ sites in ZnO host has been proved. In the photoluminescence spectra, the observed blue shifts in NBE peaks and decrease of emissions intensity on Mn doping have thoroughly been discussed in the present investigation.     

Hazardous phytotoxic nature of cobalt and zinc oxide nanoparticles assessed using Allium cepa

The increasing use of nanotechnology requires the clarification of the behavior and the effects of nanoparticles (NPs) as they are released into the environment. This study was to investigate the phytotoxicity of cobalt and zinc oxide NPs using the roots of Allium cepa (onion bulbs) as an indicator organism. The effects of cobalt and zinc oxide NPs on the root elongation, root morphology, and cell morphology of a plant, as well as their adsorption potential, were determined through the hydroponic culturing of A. cepa. A. cepa roots were treated with dispersions of the cobalt and zinc oxide NPs having three different concentrations (5, 10, and 20 μg ml(-1)). With increasing concentrations of the NPs, the elongation of the roots was severely inhibited by both the cobalt and the zinc oxide NPs as compared to that in the control plant (untreated A. cepa roots). Massive adsorption of cobalt oxide NPs into the root system was responsible for the phytotoxicity. Zinc oxide NPs caused damage because of their severe accumulation in both the cellular and the chromosomal modules, thus signifying their highly hazardous phytotoxic nature.