Inductively coupled plasma etching of InGaP, AllnP, and AlGaP in Cl2 and BCl3 chemistries

Dry etching of InGaP, AlInP, and AlGaP in inductively coupled plasmas (ICP) is reported as a function of plasma chemistry (BCl₃ or Cl₂, with additives of Ar, N₂, or H₂), source power, radio frequency chuck power, and pressure. Smooth anisotropic pattern transfer at peak etch rates of 1000–2000Å·min^?1 is obtained at low DC self-biases (?100V dc) and pressures (2 mTorr). The etch mechanism is characterized by a trade-off between supplying sufficient active chloride species to the surface to produce a strong chemical enhancement of the etch rate, and the efficient removal of the chlorinated etch products before a thick selvedge layer is formed. Cl₂ produces smooth surfaces over a wider range of conditions than does BCl₃.     

A study on UV-curable coatings for HD-DVD: Primer and top coats

This study relates to the development of coatings for optical discs in high-density digital versatile disc systems (HD-DVD or blue lay disk) that use a high numerical aperture of 0.85 at 405 nm wavelength and have a protective top layer over a primer layer for protection against damage and dust. Ultraviolet-curable raw materials of two acrylic monofunctional monomers ( isobornylacrylate, IBA and tetrahydrofurfurylacrylate, THFA) and two kinds of urethaneacrylate oligomers (OUMD and OUME) have been easily mixed with photoinitiators. Curing rate of these materials was characterized by FT-IR. In case of top coats, VTES (vinyltriethoxysilane) and acrylic acid were added to enhance the abrasion resistance. These two kinds of UV-curable resinous materials having no solvent were synthesized and investigated as means for making a blue ray disk having good optical and mechanical properties. In addition, dynamic characteristics including reflectivity, fluctuation of RF signal and noise level were also investigated.     

Catalytic dehydrogenation of ethylbenzene with carbon dioxide: promotional effect of antimony in supported vanadium–antimony oxide catalyst

Alumina-supported vanadium oxide, VO_x/Al₂O₃, and binary vanadium–antimony oxides, VSbO_x/Al₂O₃, have been tested in the ethylbenzene dehydrogenation with carbon dioxide and characterized by S_BET, X-ray diffraction, X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction and CO₂ pulse methods. VSbO_x/Al₂O₃ exhibited enhanced catalytic activity and especially on-stream stability compared to VO_x/Al₂O₃ catalyst. Incorporation of antimony into VO_x/Al₂O₃ increased dispersion of active VO_x species, enhanced redox properties of the systems and formed a new mixed vanadium–antimony oxide phase in the most catalytically efficient V_0.43Sb_0.57O_x/Al₂O₃ system.     

Enhanced high-frequency performance in a GaAs, self-aligned, n-JFETusing a carbon buried p-implant

C ion implantation has been employed, for the first time, to form the buried p-layer in GaAs, self-aligned, ion implanted JFETs. Comparable DC performance was seen for JFETs with C or Mg implants; however, C-backside JFETs showed superior high-frequency performance. High dose C-backside devices had a f_t of 28.3 GHz and a f_max of 43.2 GHz for a 0.5 μm gate length that were 28% and 46% higher, respectively, than comparable Mg-implanted JFETs. This enhancement is a result of the lower C_gs in the C-backside device resulting from he inherently low activation of the implanted C below the channel while the C still effectively compensated the tail of the Si-channel implant. This approach relaxes the trade-off between optimizing the DC and the AC performance for the buried p-implant in GaAs JFETs and MESFET's     

Sulfonated polyimide and poly (ethylene glycol) diacrylate based semi‐interpenetrating polymer network membranes for fuel cells

Semi‐interpenetrating polymer network (semi‐IPN) membranes based on novel sulfonated polyimide (SPI) and poly (ethylene glycol) diacrylate (PEGDA) have been prepared for the fuel cell applications. SPI was synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid, and 2‐bis [4‐(4‐aminophenoxy) phenyl] hexafluoropropane. PEGDA was polymerized in the presence of SPI to synthesize semi‐IPN membranes of different ionic contents. These membranes were characterized by determining, ion exchange capacity, water uptake, water stability, proton conductivity, and thermal stability. The proton conductivity of the membranes increased with increasing PEGDA content in the order of 10^?1 S cm^?1 at 90°C. These interpenetrating network membranes showed higher water stability than the pure acid polyimide membrane. This study shows that semi‐IPN SPI membranes based on PEGDA which gives hydrophilic group and structural stability can be available candidates comparable to Nafion® 117 over 70°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Magnetization reversal of a double-layer exchange-coupled ferromagnetic film

A theoretical investigation of magnetization reversal of a double-layer magnetic film with an easy-plane and easy-axis anisotropy has been performed. An analytical expression for the magnetization distribution in the layers in the presence of a magnetic field has been obtained. The calculations performed on the basis of the analytical relationships obtained show that when the thickness of the layers is close to the width of a magnetic inhomogeneity, it substantially affects the magnitude of the critical field for the magnetization reversal of the sample and the shape of the magnetization curve. It is also shown that a decrease in the exchange coupling between the layers leads to an increase in the magnitude of the critical field of magnetization reversal.     

Nitriding of Molten Chromium-Manganese Steels

Metallurgist - Theoretical and experimental studies are conducted in the field of nitriding high strength nonmagnetic steels. Temperature-time correlation of the degree nitrogen assimilation and...     

Structure and hardness of octahedral natural diamond single crystals depending on the HPHT treatment conditions

The structure evolution of octahedral natural diamond single crystals has been studied depending on the HPHT treatment using Raman scattering and infrared spectroscopy. It has been found that the formation of a polycrystalline diamond capsule around a single crystal at p = 8 GPa and T = 1500°C gives rise to a combined structural-stressed state in the single crystal due to its plastic strain. This state has been manifested by a significantly (more than double) broadening of the characteristic line of diamond (1332 cm^?1) in the Raman spectrum and the increase of a single crystal hardness from 105 to 120 GPa.