Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Synthesis of novel acrylic modified water reducible alkyd resin: Investigation of acrylic copolymer ratio effect on film properties and thermal behaviors

New four‐component water reducible acrylic modified alkyd resins that are based on 1,3‐propanediol and contain different ratios of acrylic copolymer (AC) were synthesized by using a novel four‐stage fatty acid method. The final content of solids in the water reducible acrylic modified alkyd resins was 60% by weight. After the modified alkyd resin films were cured at 150°C for 1 h, it was observed that the use of AC as the modifier component had improved their physical and chemical surface coating properties and thermal behaviors. Experimental results show that the optimum AC ratio is 40% of the equivalent amount of AC to alkyd resin. Low‐volatile organic compounds (VOC) content water reducible acrylic modified alkyd resins yielded soft and flexible films with high chemical/thermal resistance, suitable for manufacturing of surface coating binders. POLYM. ENG. SCI., 56:947–954, 2016. © 2016 Society of Plastics Engineers     

Transmutation-incineration potential of transuraniums discharged from PWR-UO2 spent fuel in modified PROMETHEUS fusion reactor

This study presents the potential of the burning and/or transmutation (B/T) of transuraniums (TRUs), discharged from the pressured water reactor PWR-UO₂ spent fuel, in the modified PROMETHEUS-H fusion reactor. Two different design shapes (Models A and B) were considered. The transmutation zone (TZ), which contains the mixture of TRU nuclides (10%), was located in the modified blankets. The volume fraction of Pu in the mixture is raised from 0 to 40% stepped by 10% to determine its effect on the B/T. The fuel spheres were cladded with SiC (5%) and cooled with high-pressured helium gas (85%) for nuclear heat transfer. The calculations were performed for an operation period (OP) of up to 10 years by 75% plant factor (η) under a neutron wall load (P) of 4.7 MW/m². The results bring out that: (1) the Model B transmutes the TRUs more rapidly than the Model A; (2) the effective half-lives decrease about 20 and 40% with the increase of Pu fraction in the cases of Models A and B, respectively; (3) the M values are quite high with respect to the M value of the original PROMETHEUS fusion reactor; (4) the blankets can produce substantial electricity in situ.     

Numerical Study on Effects of Fuel Mixture Fraction and Li-6 Enrichment on Neutronic Parameters of a Fusion–Fission Hybrid Reactor

This study presents the effects of mixture fractions of nuclear fuels (mixture of fissile–fertile fuels and mixture of two different fertile fuels) and ⁶Li enrichment on the neutronic parameters (the tritium breeding ratio, TBR, the fission rate, FR, the energy multiplication ratio, M, the fissile breeding rate, FBR, the neutron leakage out of blanket, L, and the peak-to-average fission power density ratio, Γ) of a deuterium–tritium (D–T) fusion neutron-driven hybrid blanket. Three different fertile fuels (²³²Th, ²³⁸U and ²⁴⁴Cm), and one fissile fuel (²³⁵U) were selected as the nuclear fuel. Two different coolants (pressurized helium and natural lithium) were used for the nuclear heat transfer out of the fuel zone (FZ). The Boltzmann transport equation was solved numerically for obtaining the neutronic parameters with the help of the neutron transport code XSDRNPM/SCALE4.4a. In addition, these calculations were performed by also using the MCNP4B code. The sub-limits of the mixture fractions and ⁶Li enrichment were determined for the tritium self-sufficiency. The considered hybrid reactor can be operated in a self-sufficiency mode in the cases with the fuel mixtures mixed with a fraction of equal to or greater than these sub-limits. Furthermore, the numerical results show that the fissile fuel breeding and fission potentials of the blankets with the helium coolant are higher than with the lithium coolant.     

Poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) based tissue engineering matrices

In this study, the aim was to produce tissue-engineered bone using osteoblasts and a novel matrix material, poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV). In order to prepare a porous PHBV matrix with uniform pore size, sucrose crystals were loaded in the foam and then leached leaving pores behind. The surface of the PHBV matrix was treated with rf-oxygen plasma to increase the surface hydrophilicity. SEM examination of the PHBV matrices was carried out. Stability of PHBV foams in aqueous media was studied. The pH decrease is an indication of the degradation extent. The weight and density were unchanged for a period of 120 days but then a significant decrease was observed for the rest of the study. Osteoblast cells were then isolated from rat bone marrow and seeded onto PHBV matrices. The metabolization and proliferation on the foams was determined with MTS assay which showed that osteoblasts proliferated on PHBV. It was also found that cells proliferated better on large pore size foams (300–500 m) than on the small pore size foams (75–300 m). Production of ALP was measured spectrophotometrically. The present study demonstrated that PHBV matrices are suitable substrates for osteoblast proliferation and differentiation.     

Highly conductive polymer materials based multi-walled carbon nanotubes as counter electrodes for dye-sensitized solar cells

Poly(3,4-ethylenedioxxythiophene) (PEDOT), polyaniline (PANI) and polythiophene (PTh) based multi-walled carbon nanotube (MWCNT) composites were successfully prepared using RF-rotating plasma grafting method. Morphological characterizations of composites were determined using scanning electron microscopy (SEM), which showed that conducting polymers (CPs) of PEDOT, PANI and PTh were coated on the surface of CNTs. The surface properties of the Carbon Nanotube (CNT) composites were also determined by using Infrared Spectra (FT-IR), X-ray Photon Spectra (XPS), and Scanning Electron Microscopy-Energy Dispersive X-ray Spectra (SEM-EDX) analysis. X-ray photon spectra results confirmed the formation of the composites. Composites of MWCNT were used in dye-sensitized solar cells (DSSCs) as counter electrodes and exhibited short-circuit photocurrent densities of 11.19, 10.70 and 8.54 mA/cm² for PANI/MWCNT, PTh/MWCNT and PEDOT/CNT, respectively.