Isolated ovarian polyarteritis nodosa

Polyarteritis nodosa is a rare disorder and a form of systemic vasculitis. A 48 year-old female was admitted to the hospital because menorrhagia and pelvic pain in February 1993. The patient underwent exploratory laparotomy resulting in a total hysterectomy and bilateral salpingo-oophorectomy for myoma of uterus and a right adnexal cystic mass. Histopathologic examination revealed left ovarian periarteritis nodosa. Further investigation and 9 months follow-up failed to show any systemic involvement. To our knowledge the isolated ovarian polyarteritis nodosa is the first case in the literature.     

A new method for power generation planning and problems of uncertainty

This paper presents a new method for power system planning which considers uncertainties of various system parameters as a part of the criterion function. The criterion function involves both the expected values of total system costs and the cost variances of different power plants. Previously, the authors proposed that these cost variances be evaluated from the existing power system plans in the form of the solutions to the inverse optimization problem, and then applied this procedure to the planning of power systems in Japan. However, because of the correlation between fuel and facility costs, the cost variances could not be determined as specific values. Here, to overcome this difficulty, the authors now introduce hydropower plants into the model as the so-called nonrisky elements and focus on the expenditure shares rather than the plant capacity shares. As a result, more reasonable results are obtained. This improved methodology is applied and the derived cost variances are shown. Further, using the resultant cost variances, the authors make Pareto-optimal power generation plans and demonstrate also the robustness of the method to price fluctuations.     

Selectivity in Methanol Oxidation as Studied on Model Systems Involving Vanadium Oxides

Oxidation catalysts are modeled by oxide single crystals, thin oxide films, as well as supported oxide nanoparticles. We characterize the surface of those materials using a variety of surface sensitive techniques including scanning tunneling microscopy and spectroscopy, photoelectron spectroscopy, infrared spectroscopy, and thermal desorption spectroscopy. We find temperature dependent structural transformations from V₂O₅(001) to V₂O₃(0001) via V₆O₁₃(001). V₂O₃(0001) is found to be vanadyl terminated in an oxygen ambient and it loses the vanadyl termination after electron bombardment. It is shown that the concentration of vanadyl groups controls the selectivity of the methanol oxy-dehydrogenation towards formaldehyde. A proposal for the mechanism is made. The results on single crystalline thin films are compared with similar measurements on deposited vanadia nanoparticles. The experimental results are correlated with theoretical calculations and models.     

Bioactive ceramic coatings containing carbon nanotubes on metallic substrates by electrophoretic deposition

A range of potentially bioactive ceramic coatings, based on combinations of either hydroxyapatite (HA) or titanium oxide nanoparticles with carbon nanotubes (CNTs), have been deposited on metallic substrates, using electrophoretic deposition (EPD). Sol–gel derived, ultrafine HA powders (10–70 nm) were dispersed in multi-wall nanotube-containing ethanol suspensions maintained at pH = ∼3.5 and successfully coated onto Ti alloy wires at 20 V for 1–3 min For TiO₂/CNT coatings, commercially available titania nanopowders and surface-treated CNTs in aqueous suspensions were co-deposited on stainless steel planar substrates. A field strength of 20 V/cm and deposition time of 4 min were used working at pH = 5. Although the co-deposition mechanism was not investigated in detail, the evidence suggests that co-deposition occurs due to the opposite signs of the surface charges (zeta potentials) of the particles, at the working pH. Electrostatic attraction between CNTs and TiO₂ particles leads to the creation of composite particles in suspension, consisting of TiO₂ particles homogenously attached onto the surface of individual CNTs. Under the applied electric field, these net negatively charged “composite TiO₂/CNT” elements migrate to and deposit on the anode (working electrode). The process of EPD at constant voltage conditions was optimised in both systems to achieve homogeneous and reasonably adhered deposits of varying thicknesses on the metallic substrates_.     

Characterization of Clay Particle Surfaces for Contaminant Sorption in Soil Barriers Using Flow Microcalorimetry

Clays such as kaolinite and bentonite are widely used in various industries as sorbents. The sorptive characteristics of clays are exploited when they are used in contaminant barrier systems. To use clays effectively, their surface characteristics need to be known; especially, when they are used for contaminant sorption. Available surface area of clay minerals and the characteristics that depend on it are very sensitive to environmental changes such as those that can be induced by changes in the composition of pore fluid. Flow microcalorimetry with a down-stream concentration was used to determine the heats and amounts of adsorption of acids and bases on the clays. Test results presented herein revealed that both kaolinite and bentonite exhibit significantly different adsorption isotherms and heat of wetting under high pH and low pH conditions. Kaolinite has the capacity to adsorb both acidic and basic molecules almost equally. However, it has a tendency to adsorb more base than acid because of its stronger complexation capacity with acids than with bases. On the other hand, bentonite has a tendency to adsorb more acidic than basic molecules per gram. These results also indicate that both kaolinite and bentonite have different heats of wetting characteristics. As the concentrations of the acids and bases increase, the heat of wetting of kaolinite decreases while that of bentonite increases.     

Public key cryptography based privacy preserving multi-context RFID infrastructure

In this paper, we propose a novel radio frequency identification (RFID) infrastructure enabling multi-purpose RFID tags realized by the use of privacy preserving public key cryptography (PKC) architecture. The infrastructure ensures that the access rights of the tags are preserved based on the spatial and temporal information collected from the RFID readers. We demonstrate that the proposed scheme is secure with respect to cryptanalytic, impersonation, tracking, replay, and relay attacks. We also analyze the feasibility of PKC implementation on passive class 2 RFID tags, and show that the requirements for PKC are comparable to those of other cryptographic implementations based on symmetric ciphers. Our numerical results indicate PKC based systems can outperform symmetric cipher based systems, since the back end servers can identify RFID tags with PKC based systems approximately 57 times faster than the best symmetric cipher based systems.     

Multilayer Graphene Broadband Terahertz Modulators with Flexible Substrate

Fabrication of terahertz modulators as simple devices with high modulation depth across a broad bandwidth is still very challenging. In this study, four different chemical vapor deposition grown multilayer graphene (MLG) modulators based on MLG/ionic liquid/gold sandwich structures have been investigated. Flexible substrates (PVC and PE) were chosen as host materials, and devices were fabricated with three different thicknesses. The resultant MLG devices can be operated at low voltages between 0 and 3.4 V providing nearly complete modulation between 0.2 and 1.5 THz with low insertion losses. Even with such low gate voltages, the devices have been doped significantly inducing 7–11-fold improvement in their sheet conductivities depending on device thickness. In addition, sheet conductivity has been improved more than three times as the graphene layer number increased from 30 to 100. With the demonstration of promising device performances, the proposed modulators can be potential candidates for applications in terahertz and related optoelectronic technologies.     

Low-Power Tunable Analog Circuit Blocks Based on Nanoscale Double-Gate MOSFETs

We illustrate unique examples of low-power tunable analog circuits built using independently driven nanoscale DG-MOSFETs, where the top gate response is altered by application of a control voltage on the bottom gate. In particular, we provide examples for a single-ended CMOS amplifier pair, a Schmitt trigger circuit and a operational transconductance amplifier C filter, circuit blocks essential for low-noise high-performance integrated circuits for analog and mixed-signal applications. The topologies and biasing schemes explored here show how the nanoscale DG-MOSFETs may be used for efficient, tolerant and smaller circuits with tunable characteristics.     

Variable Step-Size Constant Modulus Algorithm Employing Fuzzy Logic Controller

The Constant Modulus Algorithm (CMA), although it is the most commonly used blind equalization technique, converges very slowly. The convergence rate of the CMA is quite sensitive to the adjustment of the step size parameter used in the update equation as in the Least Mean Squares (LMS) algorithm. A novel approach in adjusting the step size of the CMA using the fuzzy logic based outer loop controller is presented in this paper. Inspired by successful works on the variable step size LMS algorithms, this work considers designing a training trajectory that it overcomes hurdles of an adaptive blind training via controlling the level of error power (LOEP) and trend of error power (TOEP) and then obtains a more robust training process for the simple CMA algorithm. The controller design involves with optimization of training speed and convergence rate using experience based linguistic rules that are generated as a part of FLC. The obtained results are compared with well-known versions of CMA; Conventional CMA, Normalized-CMA [Jones, IEEE conference record of the twenty-ninth asilomar conference on signals, systems and computers (Vol. 1, pp. 694–697), 1996], Modified-CMA [Chahed, et al., Canadian conference on electrical and computer engineering (Vol. 4, pp. 2111–2114), 2004], Soft Decision Directed-CMA (Chen, IEE Proceedings of Visual Image Signal Processing, 150, 312–320, 2003) for performance measure and validation.