THD analysis for finite slider bearing with roughness: special reference to load generation in parallel sliders

This paper analyses the thermal and roughness effects on different characteristics of finite rough tilted pad slider bearings. The roughness is assumed to be stochastic, Gaussian randomly distributed. Density and viscosity are assumed to be temperature dependent. In this study, two models of one-dimensional roughness, longitudinal and transverse, are considered. The irregular domain due to roughness is mapped to a regular domain so that the numerical method can be easily applied. The modified Reynolds equation, momentum equation, continuity equation and energy equation are coupled and solved using the finite difference method to yield various bearing characteristics. It is observed that for nonparallel slider bearing the load carrying capacity due to the combined effect is less than the load capacity due to the roughness effect for both longitudinal and transverse roughness models. However, in case of a parallel pad slider bearing, the reverse is true, though the load capacity is not significant. It is also observed that the load carrying capacity due to the combined effect is larger than the load carrying capacity due to the thermal effect for both roughness models.     

Accelerated study on lysozyme deposition on poly(HEMA) contact lenses

A technique was developed to accelerate lysozyme deposition on poly(HEMA) contact lenses and measure the amounts of the deposited lysozyme. This technique was for evaluation of bendazac lysine solution, a contact lens cleaning and wetting solution. Effect of temperature on lysozyme deposition on poly(HEMA) contact lenses was examined. Five temperatures ranging from 25 degrees C to 90 degrees C were chosen to examine the temperature effect. The amounts of lysozyme deposited on poly(HEMA) contact lenses at 25 C and 60 C were 0.27 microg/lens and 0.61 microg/lens, respectively. The amount increased sharply to 23 microg/lens at 70 degrees C with the maximum of 31 microg/lens at 90 degrees C. Kinetics of lysozyme deposition on poly(HEMA) contact lenses was examined at 80 degrees C. Lysozyme deposition increased sharply during the first 2 h and reached a plateau after 2 h. Effectiveness of various cleaning procedures was examined using bendazac lysine solution. When the contact lenses were washed without rubbing with fingers, the bendazac lysine reduced the amount of deposited lysozyme by more than 40% from 18.3 microg/lens to 10.6 microg/lens. The effect of bendazac lysine was most prominent when the contact lenses were shaken during storage in the presence of lysozyme in solution. If the contact lenses were cleaned by rubbing with fingers, the effect of bendazac lysine solution on the prevention of lysozyme deposition was negligible.     

Classification of rose flowers based on Fourier descriptors and color moments

Multimedia Tools and Applications - In this paper, a rose-flower variety classification scheme, using color and shape features is presented. The first three statistical moments of the R, G, and B...     

Scale-up unit of a unique moderately high pressure unit to enhance microbial inactivation

The efficacy of a scale-up of a moderately high pressure unit built in this work was investigated with regards to inactivation of Geobacillus stearothermophilus spores suspended in pumpkin soup, and effect of the process on l-ascorbic acid. In this design saturated steam was used as a heating medium. The treatment unit is a double pipe heat exchanger in which the food is pumped in its inner tube, while steam is passed in the annular region to heat the sample. This technology comprises a unique approach of generating a mild pressure (80-100 MPa) utilizing thermal expansion of the liquid being treated. The results show that this unique application decreased the D-values of Geobacillus stearothermophilus ATCC 7953 spores suspended in soup samples in comparison to thermal treatment alone. The improvement was more significant at lower treatment temperatures. The D-values obtained were in a good agreement with that of the small unit built earlier in which oil was used as a heating medium. The effect of treatment on l-ascorbic acid was similar to that of thermal treatment. The treated samples were subjected to shelf life study by storing them at two different temperatures. No evidence of spore recovery was noted during the post-treatment storage period.     

Experimental characterization of meso‐scale deformation mechanisms and the RVE size in plastically deformed carbon steel

The local deformation response of low carbon steel subjected to uniaxial tensile loading is investigated, and the local strain field at sub‐grain scale is obtained using high‐spatial‐resolution digital image correlation. The implemented digital image correlation method enables the observation and study of inhomogeneous deformation response at microstructural levels. Detailed local deformation mechanisms including mesoscopic slip bands are captured. Furthermore, the local information is used for the determination of representative volume element size in polycrystalline low carbon steel. To obtain the representative volume element size, we proposed and successfully implemented a strain variation method. Further, the influence of global strain on the local deformation mechanisms and representative volume element size is discussed. The challenges associated with the local strain measurement using digital image correlation are also discussed.     

Preparation of value added composite boards using finished leather waste and plant fibers—a waste utilization effort in Ethiopia

Preparation of composite materials with better mechanical properties and agreeable use is a need of the time for the reason that it is eco-friendly. Having this objective in mind, the work of preparing value-added leather composites using finished leather waste and various plant fibers as raw materials is done in the laboratory of Council of Scientific and Industrial Research–Central Leather Research Institute, India. In the leather goods and footwear manufacturing industries, about 20–30% of leather is discarded as waste, and presently it is imperative to make effort to utilize this waste in Ethiopia because it is huge and untapped resource. The recycled leather (RCL) as control and its composite boards (CBs) which are the mixtures of leather fibers with plant fibers like jute (Corchorus trilocularis L.), hibiscus (Hibiscus cannabinus), sisal (Agave sisalana), palm (Phoenix dactylifera) and enset (Ensete ventricosum) in the proportion of 10, 20, 30, and 40% are characterized for their physicochemical properties (tensile strength, elongation at break, stitch tear strength, water absorption, water desorption, and flexing strength), scanning electron microscope (SEM), Fourier transform infrared, thermogravimetric analysis (TGA), and differential scanning calorimeter (DSC). Composites exhibited better mechanical properties compared to those of control boards. SEM pictures showed the composite nature of the boards. TGA studies revealed better thermal stability for composites. In the DSC study, the CBs of RCL-S and RCL-P exhibited higher melting point values than those of RCL-J, RCL-H, and RCL-E samples. Based on these results, all the composite boards may be used as raw material for the preparation of consumer products such as insoles, chapel-uppers, wallets, light hand bags, mouse pads, roofing, wall partitioning, and components of furniture and interior decorations.     

Identification of system vulnerabilities in the Ethiopian electric power system

The Ethiopian Electric Power(EEP) has been operating and managing the national interconnected power system with dispersed and geographically isolated generators, a complex transmission system and loads. In recent years, with an increasing load demand due to rural electrification and industrialization, the Ethiopian power system has faced more frequent, widely spread and long lasting blackouts. To slash the occurrence of such incidents, identifying the system vulnerabilities is the first step in this direction. In this paper, the vulnerability assessment is performed using indices called active power performance index(PIp) and voltage performance index(PIv). These indices provide a direct means of comparing the relative severity of the different line outages on the system loads and voltage profiles. Accordingly, it is found that the most severe line outages are those lines that interconnect the high load centered(Addis Ababa and Central regions) with the rest of the regional power systems. In addition, the most vulnerable buses of the network in respect of voltage limit violations are mainly found at the high load centers.