Morphology and surface properties of some siloxane–organic copolymers

BACKGROUND: It is well known that, due to their extremely low polarity, polysiloxanes are incompatible with almost any organic system. This incompatibility leads to phase separation in mixed siloxane–organic systems. RESULTS: Three siloxane–organic copolymers, poly[(5,5′‐methylene‐bis‐salicylaldehyde)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz1), poly[(2,5‐dihydroxy‐1,4‐benzoquinone)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz2) and poly[1,3‐bis(propylene)tetramethyldisiloxane diamide] (Pam), were prepared by the reaction of 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane with appropriate organic partners (5,5′‐methylene‐bis‐salicylaldehyde, 2,5‐dihydroxy‐1,4‐benzoquinone and oxalyl chloride, respectively). The morphologies dictated by the incompatibility between siloxane and polar organic moieties were investigated using differential scanning calorimetry and scanning electron microscopy. The surface activity of the copolymers and water vapour sorption capacity were also measured. CONCLUSION: Even though the polar sequences are very short ones, the highly flexible siloxane‐containing sequence permits the self‐assembly of these into more or less polar domains. Such an organization influences the properties of the resulting materials, an important place being occupied by the surface properties. Copyright © 2009 Society of Chemical Industry     

Seismic response and fragility evaluation for an Eastern US NPP including soil–structure interaction effects

The paper discusses methodological aspects involved in a probabilistic seismic soil–structure interaction (SSI) analysis for a Seismic Probabilistic Risk Assessment (SPRA) review. An example of an Eastern US nuclear power plant (NPP) is presented. The approach presented herein follows the current practice of the Individual Plant Examination for External Events (IPEEE) program in the US. The NPP is founded on a relatively soft soil deposit, and thus the SSI effects on seismic responses are significant. Probabilistic models used for the idealization of the seismic excitation and the surrounding soil deposit are described. Using a lognormal format, computed random variability effects were combined with those proposed in the SPRA methodology guidelines. Probabilistic floor response spectra and structural fragilities for different NPP buildings were computed. Structural capacities were determined following the current practice which assumes independent median safety factors for strength and inelastic absorption. Limitations of the IPEEE practice for performing SPRA are discussed and alternate procedures, more rigorous and simple to implement, are suggested.     

On the preparation of porous crosslinked poly(ethylene dimethacrylate esters): Polymers and copolymers

Macroreticular polymers and copolymers based on poly(ethylene glycol dimethacrylate esters) possessing a permanent porosity (white opaque beads, 40–60% porosity, 354 m²/g, the apparent density less than 1.060 g/mL, etc.) were prepared. The influence of the porogen thermodynamic quality and its weight fraction used in the polymerization mixture on the bead structure was also studied. The porous structure of the matrices was investigated and proved by SEM analyses, the N₂ adsorption (BET) method, etc. The thermal degradation mechanism of the macroreticular beads based on dimethacrylate esters shows that the thermal stability of samples depends on the monomer structure, i.e., the chain length between the two vinyl groups. © 1996 John Wiley & Sons, Inc.     

Modification of cellulose/chitin mix fibers with N‐isopropylacrylamide and poly(N‐isopropylacrylamide) under cold plasma conditions

A two‐step grafting procedure was applied to cellulose/chitin (CC) mix fibers, namely: activation under the action of cold plasma discharges, followed by reaction with N‐isopropylacrylamide (NIPAAm) and poly(N‐isopropylacrylamide) (PNIPAAm) to obtain fibers with responsiveness to external stimuli. The graft samples were characterized using attenuated total reflection Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction, scanning electron microscopy coupled with energy‐dispersive X‐ray microanalysis and antimicrobial testing. All obtained results confirm the morphological and structural changes after plasma treatment which determine the modification of cellulose fiber properties. It was estimated from XPS data that the degrees of modification/grafting were about 23% for CC/NIPAAm and 13% for CC/PNIPAAm. Such treatment could be transferred to practical technologies, particularly in textile applications and special applications in the medical field. Copyright © 2012 Society of Chemical Industry     

Surface properties and biocompatibility of cellulose acetates

The article describes some properties of cellulose acetates (CAs) with different substitution degrees. The hydrophilic/hydrophobic properties, morphological aspects, and interface properties with red blood cells and platelets are affected by the substitution degree, synthesis conditions, history of the formed films from solutions in acetone/water nonsolvent/nonsolvent mixtures, and low pressure plasma treatment. The results obtained are useful in biomedical applications, including evaluation of bacterial adhesion onto surfaces, or utilization of CA for semipermeable membranes. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Compatibility of polystyrene/polyolefin blends containing compatibilizing agents, 2. Extraction behavior

Polystyrene (PS)/polyolefin (PO) blends in various mixing ratios compatibilized by a triblock copolymer polystyrene‐block‐poly(ethene‐co‐butylene)‐block‐polystyrene (SEBS) and a diblock copolymer polystyrene‐block‐poly(ethene‐co‐propene) (SEP) and subsequently γ‐irradiated were prepared. The blends have been subjected to extraction in different solvents (chloroform or toluene) for various periods of time to obtain porous films. The efficiency of the extraction and the morphology of the films have been assessed by infrared spectrometry (IR), optical and electronic microscopy, differential scanning calorimetry (DSC) and thermogravimetry (TG); glass transition, melting heat, thermal stability, overall kinetic parameters and weight losses have been evaluated. The extraction behavior is close related to compatibility of the components, so on the base of the obtained results optima compatibility ratios have been established.     

Morphology and surface properties of side-chain modified polysulfones

Two series of modified polysulfones containing siloxane-aliphatic pendant moieties were analysed by optical microscopy, transmission electron microscopy, electron diffraction, contact angles measurements and X-ray photoelectron spectroscopy (XPS or ESCA), in order to establish the microstructure and surface properties. All samples exhibited biphasic bulk morphology due to a crystallization tendency induced by the pendant moiety, and silicon enriched surface irrespective of the substitution degree. The values of the surface tension calculated from contact angle measurements were in agreement with the hypothesis of surface enrichment.     

Stochastic Finite-Element Analysis of Seismic Soil–Structure Interaction

A procedure is presented for the probabilistic analysis of the seismic soil-structure interaction problem. The procedure accounts for uncertainty in both the free-field input motion as well as in local site conditions, and structural parameters. Uncertain parameters are modeled using a probabilistic framework as stochastic processes. The site amplification effects are accounted for via a randomized relationship between the soil shear modulus and damping on the one hand, and the shear strain of the subgrade on the other hand, as well as by modeling the shear modulus at low strain level as randomly fluctuating with depth. The various random processes are represented by their respective Karhunen-Loève expansions, and the solution processes, consisting of the accelerations and generalized forces in the structure, are represented by their coordinates with respect to the polynomial chaos basis. These coordinates are then evaluated by a combination of weighted residuals and stratified sampling schemes. The expansion can be used to carry out very efficiently, extensive Monte Carlo simulations. The procedure is applied to the seismic analysis of a nuclear reactor facility.     

Composite materials based on polydimethylsiloxane and in situ generated silica by using the sol–gel technique

A polydimethylsiloxane-α,ω-diol with molar mass M_n = 43,000 has been synthesized by cationic polymerization of octamethylcyclotetrasiloxane and reinforced with silica. Two pathways were used for incorporation of silica in the polymeric matrix: ex situ by mechanical blending of a pretreated fumed silica and in situ by adding tetraethyl-orthosilicate (TEOS) as silica precursor in the polymer matrix followed by their hydrolysis and condensation (sol–gel technique). The procedure occurred in the absence of solvent. Composites with different contents of silica were prepared and investigated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The results were compared to those obtained on a model network based on the same polysiloxane without silica. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers