Effects of Prior Annealing on the Spark Plasma Sintering of Nanostructured Y2O3 Powders

The effects produced by annealing Y₂O₃ nanopowders on their spark plasma sintering (SPS) behavior are systematically investigated in this work. It is found that the annealed powders display higher sinterability with respect to the as‐received ones. Indeed, the maximum densification level reached from pristine powders is about 97.5%, whereas density decreases when further increasing either the sintering temperature or the dwell time. In contrast, the density of SPS products obtained from pretreated powder monotonically increases with temperature and processing time, thus leading to fully dense materials in 30 min at 1050°C and 60 MPa. Correspondingly, it is found that the annealing treatment markedly inhibits grain coarsening during SPS. Thus, dense translucent samples with grain size below 100 nm can be attained from annealed powders. On the other hand, white‐opaque specimens with significantly coarser microstructures (up to 1‐μm‐sized grains) are obtained when pristine powders are directly processed under the same sintering conditions. Furthermore, it is observed that the annealing treatment of SPS samples in air allows for graphite contamination removal, whereas no improvement in term of light transmittance is produced.     

Vibrational analysis of functionalized polyolefins/poly(vinylchloride) blends

Polyolefins functionalized with diethylmaleate were mixed with poly(vinylchloride) (PVC) in different compositions. Intermolecular interactions involving the carbonyl groups of the side chains of the functionalized polyolefins and methine hydrogens of PVC were investigated by means of infrared spectroscopy. The major flexibility of the ester groups attached to the backbone chains, with respect to polyesters, seems to increase the capability of such groups to interact with groups of more polar polymers, thus allowing prediction of easier miscibility, which however also depends on the starting polyolefin structure and function-alization degree.     

Fault-accommodation with intelligent sensors

Optimal sensor fault-accommodation is considered for faults modelled by an increase in measurement noise. This noise is taken to be bounded and its probabilistic properties unknown. It is assumed that intelligent (e.g. self-validating) instrumentation is in use and estimates of the noise bounds are available. The fault-tolerant controller is designed to optimize a noise rejection and a nominal reference tracking index and leads to a mixed norm minimization problem (l₁/l₂). We exploit known results and a particular feedback configuration to show that it is possible to optimize simultaneously without a trade-off the two performance indices. The results are applied to systems where the presence of auxiliary measurements allows for an optimal fault-accommodation strategy. Using properties of the optimal solution, we define a factorization for the optimal controller alternative to the Youla parametrization, leading to an algorithm which is optimal, transparent and efficient.     

Simultaneous Spark Plasma Synthesis and Densification of TiC–TiB2 Composites

The simultaneous synthesis and densification of dense TiC–TiB₂ composite has been investigated starting from Ti, B₄C, and C as reactants, and using the spark plasma sintering (SPS) technique. The optimal conditions for complete conversion of the reactants to the composite were determined for different applied DC current levels. A kinetic investigation performed allows us to conclude that solid-state diffusion is the mechanism governing the synthesis process. It is seen that TiC is the first phase formed, while TiB₂ formation occurs afterward. Two intermediate boride phases, i.e. TiB and Ti₃B₄, are also formed but, as the SPS holding time was augmented, they were gradually and completely converted to TiB₂. Moreover, it is found that in order to reach relatively high dense products, an electric current needs to be applied for time intervals longer than those required for obtaining complete conversion. A pure dense product (relative density ∼98%) was obtained when an electric pulsed current of 1100 A and a mechanical pressure of 20 MPa were applied for about 4 min.     

Thoracoscopic pleural tent

Lung volume reduction has been performed in patients with advanced emphysema to relieve dyspnea and improve exercise tolerance. Median sternotomy and video-assisted thoracoscopy have been proposed as equally adequate approaches; however, prolonged postoperative air leakage is the most prevalent complication in all series. For this reason, on the basis of the experience achieved with the median sternotomy approach, buttressing of the suture line with different materials and techniques for space reduction have been proposed. We describe a technique to create a pleural tent after thoracoscopic volume reduction. The thoracoscopic creation of a pleural tent is feasible and results in a duration of postoperative air leaks and hospital stays similar to that achieved with stapler line buttressing.     

Intracranial actinomycosis in juvenile patients. Case report and review of the literature

A case of actinomycotic brain infection in a juvenile patient is described. Cases of actinomycosis affecting the head and neck are rare, particularly in juvenile patients. In this case complete resolution of the infection was achieved by means of surgical treatment and prolonged antibiotic therapy. The authors emphasize the importance of a combined approach for treatment of this unusual brain infection and stress the difficulties involved in the diagnosis of this pathology.     

2-Layer Right Angle Crossing Drawings

A 2-layer drawing represents a bipartite graph where each vertex is a point on one of two parallel lines, no two vertices on the same line are adjacent, and the edges are straight-line segments. In this paper we study 2-layer drawings where any two crossing edges meet at right angle. We characterize the graphs that admit this type of drawing, provide linear-time testing and embedding algorithms, and present a polynomial-time crossing minimization technique. Also, for a given graph G and a constant k, we prove that it is $\mathcal{NP}$ -complete to decide whether G contains a subgraph of at least k edges having a 2-layer drawing with right angle crossings.     

Synthesis and catalytic activity of optically active polymers containing oxime groups

Optically active polymers containing oxime groups have been prepared: (i) by partial quaternization of poly(4-vinyl pyridine) (P4VP) with phenacyloxime bromide and with (+)-(S)-1-bromo-2-methylbutane; and (ii) by reaction of the copolymer from 4VP and (+)-(S)-5-methyl-1-hepten-3-one with hydroxylamine. These polymers have been used as catalysts for the esterolysis of esters of p-nitrophenol with non-chiral and with chiral acids. The kinetic parameters of the catalytic process are markedly dependent on the structure of polymer and substrate. A moderate chiral discrimination of the antipodes of p-nitrophenyl 2-methylbutanoate is observed with the catalyst obtained from the copolymer of 4VP with (+)-(S)-5-methyl-1-hepten-3-one.     

Hybrid materials based on metal oxides and poly(organophosphazenes)

In this paper the sol-gel preparation of hybrid materials made of metal oxide and polytorganophosphazenel components is described. The main problem focused on during this research was to avoid phase separation in order to get homogeneous materials. This problem was pursued looking at the formation of genuine chemical bonds between the exploited polyphosphazenes and the inorganic composite networks. Investigations on the thermal, mechanical, and electroconductive properties of the synthesized, phosphazene-containing composite materials showed that these matrices presented improved mechanical and thermal features with respect to those of the original phosphazene macromolecule, while the ionic conductivities of the prepared molecular hybrids doped with lithium or silver trillate are of the same order of magnitude as those measured for the neat, original phosphazene substrate.Presented at the Ist Italian Workshop on Cyclo- and Polytphosphazenel Materials. February 15–16, 1996. at the CNR Research Area in Padova, Italy.