Update on the Diagnostic Pitfalls of Autopsy and Post-Mortem Genetic Testing in Cardiomyopathies

Inherited cardiomyopathies are frequent causes of sudden cardiac death (SCD), especially in young patients. Despite at the autopsy they usually have distinctive microscopic and/or macroscopic diagnostic features, their phenotypes may be mild or ambiguous, possibly leading to misdiagnoses or missed diagnoses. In this review, the main differential diagnoses of hypertrophic cardiomyopathy (e.g., athlete’s heart, idiopathic left ventricular hypertrophy), arrhythmogenic cardiomyopathy (e.g., adipositas cordis, myocarditis) and dilated cardiomyopathy (e.g., acquired forms of dilated cardiomyopathy, left ventricular noncompaction) are discussed. Moreover, the diagnostic issues in SCD victims affected by phenotype-negative hypertrophic cardiomyopathy and the relationship between myocardial bridging and hypertrophic cardiomyopathy are analyzed. Finally, the applications/limits of virtopsy and post-mortem genetic testing in this field are discussed, with particular attention to the issues related to the assessment of the significance of the genetic variants.     

Response of captive lowland gorillas (Gorilla gorilla gorilla) to different housing conditions: Testing the aggression-density and coping models.

Several studies have suggested that primates react differently to spatial reduction. In this article, the authors tested some general hypotheses on primate response to spatial reduction by studying the Apenheul lowland gorillas (Gorilla gorilla gorilla; Apeldoorn, the Netherlands). The frequency of conflicts did not greatly change between the 2 housing settings, thus not supporting the density- aggression model. Indoor, gorillas performed touching behavior more often and increased their level of reconciliation. These findings support the coping model. Indoor, the gorillas also maintained broader interindividual distances by increasing the levels of sitting alone, avoidance, and dismissing behaviors. In conclusion, the Apenheul gorillas modified selectively the distribution of some patterns typical of their behavioral repertoire in response to a high-density condition. Both avoidance and coping tactics were used, thus revealing high levels of behavioral flexibility in this species. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Selective partial oxidation of light paraffins with hydrogen peroxide on thin-layer supported Nafion-H catalysts

Thin-layer carbon supported Nafion-H catalysts were found to be active and highly selective (S>98%) for the partial oxidation of C₁-C₃ alkanes, in a three phase catalytic membrane reactor (3PCMR), under mild conditions and in the presence of H₂O₂. The influences of the catalyst teflon loading and H₂O₂ concentration on the reaction rate have been evaluated. A reaction pathway, based on the electrophilic hydroxylation of the C-H bond of alkanes with protonated hydrogen peroxide (H₃O ₂ ⁺ ), is discussed.     

The Landscape of microRNAs in βCell: Between Phenotype Maintenance and Protection

Diabetes mellitus is a group of heterogeneous metabolic disorders characterized by chronic hyperglycaemia mainly due to pancreatic β cell death and/or dysfunction, caused by several types of stress such as glucotoxicity, lipotoxicity and inflammation. Different patho-physiological mechanisms driving β cell response to these stresses are tightly regulated by microRNAs (miRNAs), a class of negative regulators of gene expression, involved in pathogenic mechanisms occurring in diabetes and in its complications. In this review, we aim to shed light on the most important miRNAs regulating the maintenance and the robustness of β cell identity, as well as on those miRNAs involved in the pathogenesis of the two main forms of diabetes mellitus, i.e., type 1 and type 2 diabetes. Additionally, we acknowledge that the understanding of miRNAs-regulated molecular mechanisms is fundamental in order to develop specific and effective strategies based on miRNAs as therapeutic targets, employing innovative molecules.     

Attrition of spherical electrode carbon particles during batch fluidized combustion

Spherical electrode carbon particles prepared from carbon rods of dry cell batteries have been used to study the attrition behaviour in a bubbling fluidized bed combustor. Experiments have been conducted in a 40 mm I.D. and 1 m high fluidized bed combustor operated at 1 m/s superficial velocity. The bed was operated with nitrogen and with two different oxygen concentrations at 850°C to study the effect of combustion on attrition of these particles. The experimental technique used allowed the time resolution of attrited fines generation, providing detailed curves of attrition rates as a function of time. Attrition rate constants have been evaluated. Results show an enhancement of attrition due to combustion even for spherical, homogeneous and smooth particles.     

Innovative Membrane-Based Catalytic Process for Environmentally Friendly Synthesis of Oxygenates

Synthesis of liquid oxygenates from light alkanes (C₁--C₃) is achieved in a multifunctional three-phase catalytic membrane reactor (3PCMR) operating under mild conditions (T_R, 80-120 °C; P_R, 140 kPa). The features of superacid catalytic membranes mediated by the Meⁿ⁺/H₂O₂ Fenton system in activating C₁-C₃ alkanes are presented. The effect of operating conditions ([H₂O₂], [Meⁿ⁺]) on the catalyst activity is outlined. A general reaction pathway accounting for the activation of the CH bond of the alkane molecule on the superacid sites and the subsequent reaction of the activated alkane with primary reactive intermediates, generated from the Meⁿ⁺/H₂O₂ system, is proposed. The suitability of the 3PCMR in enabling simultaneous reaction and product separation is discussed.     

Effect of the metal oxide loading on the activity of silica supported MoO3 and V2O5 catalysts in the selective partial oxidation of methane

Precipitated silica catalysts loaded with either MoO₃ (0.2–4.0 wt%) or V₂O₅ (0.2–5.3 wt%) have been studied in the selective partial oxidation of methane to formaldehyde with molecular oxygen at 520 °C. The functionality of the SiO₂ surface towards the formation of HCHO is significantly promoted by V₂O₅, while it is depressed by the MoO₃.     

Design and control of an IPMC wormlike robot.

This paper presents an innovative wormlike robot controlled by cellular neural networks (CNNs) and made of an ionic polymer-metal composite (IPMC) self-actuated skeleton. The IPMC actuators, from which it is made of, are new materials that behave similarly to biological muscles. The idea that inspired the work is the possibility of using IPMCs to design autonomous moving structures. CNNs have already demonstrated their powerfulness as new structures for bio-inspired locomotion generation and control. The control scheme for the proposed IPMC moving structure is based on CNNs. The wormlike robot is totally made of IPMCs, and each actuator has to carry its own weight. All the actuators are connected together without using any other additional part, thereby constituting the robot structure itself. Worm locomotion is performed by bending the actuators sequentially from "tail" to "head," imitating the traveling wave observed in real-world undulatory locomotion. The activation signals are generated by a CNN. In the authors' opinion, the proposed strategy represents a promising solution in the field of autonomous and light structures that are capable of reconfiguring and moving in line with spatial-temporal dynamics generated by CNNs.     

On the thermomechanical behavior of the European target assembly design of IFMIF-EVEDA lithium test loop under start-up transient scenarios

Uncoupled thermomechanical transient analyses have been carried out to investigate the behavior of IFMIF-EVEDA lithium test loop bayonet backplate target assembly under two selected start-up transient operational scenarios. The first transient scenario considered foresees that the target assembly, starting from the initial uniform temperature of 50 °C, is heated up uniquely by convective heat transfer with lithium, flowing from inlet to outlet nozzle at its reference nominal temperature and pressure, until its nominal steady state thermal field distribution is reached. The second transient scenario foresees, more realistically, that the target assembly, starting from the uniform temperature of 50 °C, is initially warmed-up by electric heaters mounted onto its main accessible surfaces and, subsequently, by convective heat transfer with lithium reference flow, until nominal steady state conditions are reached. Heaters have been supposed to operate in an on/off stepwise mode, resulting to be alternatively switched on and off in order to allow the target assembly thermal field to grow up minimizing thermal gradients. To this purpose, a parametric analysis has been performed to realistically assess, for each electric heater, its heat flux and duty-cycle. Numerical results obtained are presented and critically discussed.