Thermo-physical properties of as deposited and aged thermal barrier coatings (TBC) for gas turbines: State-of-the art and advanced TBCs

In the perspective of fuelling the future generations of gas turbines by hydrogen rich syngas, the evaluation of the effect of a higher water vapour content into the flue gases on the TBC used, or potentially usable, is a need. For this purpose YPSZ APS TBC with two different microstructures have been exposed for 500?h at different temperatures in the range 1000?°C–1250?°C either in air and air +20% vol. H₂O. The comparison between the different testing conditions has been performed in terms of sintering kinetics and phase stability, as evaluated by thermal diffusivity measurements and Synchrotron X-Rays diffraction, respectively. Furthermore the characterisation of thermal properties of two innovative TBCs (GZO-YPSZ and YAG) potentially able to withstand the CMAS attack and erosive environments, respectively, has been carried out.No clear evidence of a different behaviour of TBC has been observed, at least in the considered aging time and temperature range.     

Response of captive lowland gorillas (Gorilla gorilla gorilla) to different housing conditions: Testing the aggression-density and coping models.

Several studies have suggested that primates react differently to spatial reduction. In this article, the authors tested some general hypotheses on primate response to spatial reduction by studying the Apenheul lowland gorillas (Gorilla gorilla gorilla; Apeldoorn, the Netherlands). The frequency of conflicts did not greatly change between the 2 housing settings, thus not supporting the density- aggression model. Indoor, gorillas performed touching behavior more often and increased their level of reconciliation. These findings support the coping model. Indoor, the gorillas also maintained broader interindividual distances by increasing the levels of sitting alone, avoidance, and dismissing behaviors. In conclusion, the Apenheul gorillas modified selectively the distribution of some patterns typical of their behavioral repertoire in response to a high-density condition. Both avoidance and coping tactics were used, thus revealing high levels of behavioral flexibility in this species. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Landscape of microRNAs in βCell: Between Phenotype Maintenance and Protection

Diabetes mellitus is a group of heterogeneous metabolic disorders characterized by chronic hyperglycaemia mainly due to pancreatic β cell death and/or dysfunction, caused by several types of stress such as glucotoxicity, lipotoxicity and inflammation. Different patho-physiological mechanisms driving β cell response to these stresses are tightly regulated by microRNAs (miRNAs), a class of negative regulators of gene expression, involved in pathogenic mechanisms occurring in diabetes and in its complications. In this review, we aim to shed light on the most important miRNAs regulating the maintenance and the robustness of β cell identity, as well as on those miRNAs involved in the pathogenesis of the two main forms of diabetes mellitus, i.e., type 1 and type 2 diabetes. Additionally, we acknowledge that the understanding of miRNAs-regulated molecular mechanisms is fundamental in order to develop specific and effective strategies based on miRNAs as therapeutic targets, employing innovative molecules.     

Gold nanoparticles induce cytotoxicity in the alveolar type-II cell lines A549 and NCIH441

Background  

During the last years engineered nanoparticles (NPs) have been extensively used in different technologies and consequently many questions have arisen about the risk and the impact on human health following exposure to nanoparticles. Nevertheless, at present knowledge about the cytotoxicity induced by NPs is still largely incomplete. In this context, we have investigated the cytotoxicity induced by gold nanoparticles (AuNPs), which differed in size and purification grade (presence or absence of sodium citrate residues on the particle surface) in vitro, in the human alveolar type-II (ATII)-like cell lines A549 and NCIH441.     

Multi-Criteria Decision Making support system for pancreatic islet transplantation

Pancreatic islet transplantation consists of replacing insulin-producing cells to restore normal glycemia in diabetic patients. This is a minimal invasive procedure that has been proved successful. Unfortunately unpredictability of islet transplant outcome remains a frustrating and costly issue limiting the clinical implementation of this procedure. Multiple variables are involved in the procedure and assessment is subjective to individual operators. The aim of this study was to generate a system expressing the probability of transplant success in relation to four classes of identified variables (donor, organ, isolation and recipient). We have proposed the utilization of Multi-Criteria Decision Making methods (MCDM) as a powerful tool for evaluating pancreatic islet transplant-related information with the goal to achieve optimal decision. Technique Ordered Preference by Similarity to the Ideal Solution (TOPSIS), one of the most widely used MCDM methods in decision support systems, was here utilized with modification to fit better in a medical system. In our modified method, we have utilized fuzzy logic in order to consider uncertain and vague data.     

Kenaf‐filled biodegradable composites: rheological and mechanical behaviour

Biodegradable polymer composites, typically based on biodegradable polymer matrices and natural‐organic fillers, are gaining rising interest and importance over the last few years. Several natural‐organic fillers can be used but the most widespread so far is wood, in the form of fibres or flour. Alternative cellulosic fillers can ensure advantages in terms of resource utilization and properties of the final composite. In this work, Mater‐Bi^® based biodegradable composites were prepared with two kinds of wood flour, and directly compared with alternative composites containing kenaf fibres. The use of kenaf fibres allowed improved elastic modulus, tensile strength and interaction with the polymer matrix to be obtained, although the filler dispersion was worse. Rheological measurements evidenced higher viscosity and an increasingly elastic behaviour of the melt. Copyright © 2012 Society of Chemical Industry     

Characterization of Low‐Molecular‐Weight PLA using HPLC

HPLC is applied and assessed as an effective tool to investigate both the production of PLA by polycondensation and its corresponding degradation. A new HPLC calibration procedure, through which it is possible to fully characterize LMW PLA samples by determining the concentration of each individual oligomer, is developed. A comparison between HPLC, ¹H NMR spectroscopy and non‐aqueous solution titration is also reported in order to confirm the reliability of the proposed method. Finally, the proposed analytical technique is applied to monitor the development of a polycondensation reaction performed at 150 °C and 133.3 mbar for 12 h.

     

Standardization of islet isolation outcome – A new automatic system to determine pancreatic islet viability

Pancreatic islet transplantation is emerging as a therapeutic approach for patients affected by diabetes. This approach consists of a minimally invasive procedure replacing insulin-producing cells (pancreatic islets). The technique has been proven successful, but limitations have been identified. One of the major challenges of the procedure is the counting of the isolated pancreatic islets, which is currently jeopardized by subjectivity and inaccuracy. Determination of the accurate islet number is a crucial factor in determining the correlation between the isolation product and clinical outcome. In the proposed study, we have developed software capable of objectively evaluating islet numbers and other viability variables by image analysis. This software is based on image processing and feature extraction algorithms for recognition of the area of interest. This is the first step toward standardization of the isolation outcome and potential clinical success predictability.