Optimization of quinacridone magenta,Cu-phthalocyanine cyan,and arylide yellow ink films formulated for maximum color gamut

Investigation of ink formulation options with the purpose to obtain color-gamut-optimal set of Cyan Magenta and Yellow CMY inks is reported. Implementation of the thickness dependent Kubelka-Munk model on multiple ink layers having different and well-defined thicknesses, provides characteristic absorption and scattering (K, S ) spectra of the ink ingredients. These data enable accurate computation of the reflectance spectrum and thus the L*a*b* color coordinates for any given ink thickness or substrate. Pigment materials investigated are quinacridone as magenta, copper-phthalocyanine as cyan, and arylide yellow. Scaling the peak of the absorption band to the number of molecules per unit area for the specific pigments studied in this article provides the molar extinction coefficients, 1.21 × 10⁴ , 4.7 × 10⁴ , and 3.3 × 10⁴ cm²/millimole respectively, regardless of the different ink formulations used, in accord with Avogadro's principle. Having a set of three pairs of K, S spectra is used to compute the color gamut of any CMY color combination in the L*a*b* space as a function of ink layer thickness and formulation. Using an iterative algorithm, a color-gamut-optimal set of CMY inks is obtained.     

Accelerating Boyer–Moore searches on binary texts

The Boyer and Moore (BM) pattern matching algorithm is considered as one of the best, but its performance is reduced on binary data. Yet, searching in binary texts has important applications, such as compressed matching. The paper shows how, by means of some pre-computed tables, one may implement the BM algorithm also for the binary case without referring to bits, and processing only entire blocks such as bytes or words, thereby significantly reducing the number of comparisons. Empirical comparisons show that the new variant performs better than regular binary BM and even than BDM.     

Limits to the evolution of dispersal kernels under rapid fragmentation

Adaptive evolution of dispersal strategies is one mechanism by which species can respond to rapid environmental changes. However, under rapid anthropogenic fragmentation, the evolution of dispersal may be limited, and species may be unable to adequately adapt to fragmented landscapes. Here, we develop a spatially explicit model to investigate the evolution of dispersal kernels under various combinations of fragmentation dynamics and initial conditions. We also study the consequences of modelling an evolutionary process in which dispersal phenotypes continuously and gradually shift in phenotype space in a manner corresponding to a polygenic underlying genetic architecture. With rapid fragmentation rates, we observed the emergence of long-term transient states in which dispersal strategies are not well suited to fragmented landscapes. We also show that the extent and length of these transient states depend on the pre-fragmentation dispersal strategy of the species, as well as on the rate of the fragmentation process leading to the fragmented landscape. In an increasingly fragmented world, understanding the ability of populations to adapt, and the effects that rapid fragmentation has on the evolution of dispersal, is critical for an informed assessment of species viability in the Anthropocene.     

Preliminary analysis of pore distributions using NMR in natural coral and hydrothermally prepared hydroxyapatite

Pore size distributions in an Australian coral from Goniopora sp have been measured by mercury intrusion, nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM). A significant result is that NMR predicts nanopores which could be seen visibly. The methods give similar results as mercury intrusion for large pores around 100 m but differ for smaller pores. Differences between NMR and mercury intrusion are equated using a non linear sigmoidal regression model. The NMR method was also compared with mercury intrusion methods to measure pore sizes on hydroxyapatite conversion products which have promise as bio-implants. Differences between samples due to errors in the methodology are discussed. Together all three methods are shown to complement each other.     

Design and demonstration of an experimental membrane reactor set-up for oxidative coupling of methane

In this experimental research, the performance of the oxidative coupling of methane (OCM) reactions in a porous packed bed membrane reactor was investigated. A commercially available porous alpha-alumina membrane was modified to obtain the characteristics needed for a stable and catalytically inert OCM membrane reactor. The silica-sol impregnation–calcination method and a new silicon oxycarbide (SiOC) coating-calcination approach were applied to modify the membrane. The characteristics of the resulted membrane and its typical performance as OCM membrane reactor are reported.     

Concurrent Formation of Metallic Glass During Laser Forward Transfer 3D Printing

In recent years, bulk metallic glasses (BMGs) have drawn much research attention and are shown to be of industrial interest due to their superior mechanical properties and resistance to corrosion. In spite of the interest in harnessing MG for microelectromechanical systems devices, there are limitations in manufacturing such micrometer‐scale structures. A novel approach for the fabrication of 3D MG structures using laser‐induced forward transfer (LIFT) is demonstrated. Inherent tremendous cooling rates associated with the metal LIFT process (≈10¹⁰ k s^?1) make the formation of a variety of BMGs accessible, including also various binary compositions. In this work, it is demonstrated that LIFT printing of ZrPd‐based metallic glass microstructures can also be performed under ambient conditions. X‐ray diffraction analysis of the printed structures reveals > 95% of amorphous metal phase. Taking advantage of the properties of BMG, high quality printing of high aspect ratio BMG pillars, and microbridges are demonstrated. It is also shown how a composite, amorphous‐crystalline metal structure with a required configuration can be fabricated using multimaterial LIFT printing. The inherent high resolution of the method combined with the noncontact and multimaterial printing capacity makes LIFT a valuable additive manufacturing technique to produce metallic glass‐based devices.     

Molecular Mechanisms of Skewed X-Chromosome Inactivation in Female Hemophilia Patients—Lessons from Wide Genome Analyses

Introduction: Hemophilia A (HA) is an X-linked bleeding disorder caused by factor VIII (FVIII) deficiency or dysfunction due to F8 gene mutations. HA carriers are usually asymptomatic because their FVIII levels correspond to approximately half of the concentration found in healthy individuals. However, in rare cases, a carrier may exhibit symptoms of moderate to severe HA primarily due to skewed inactivation of her non-hemophilic X chromosome. Aim: The aim of the study was to investigate X-chromosome inactivation (XCI) patterns in HA carriers, with special emphasis on three karyotypically normal HA carriers presenting with moderate to severe HA phenotype due to skewed XCI, in an attempt to elucidate the molecular mechanism underlying skewed XCI in these symptomatic HA carriers. The study was based on the hypothesis that the presence of a pathogenic mutation on the non-hemophilic X chromosome is the cause of extreme inactivation of that X chromosome. Methods: XCI patterns were studied by PCR analysis of the CAG repeat region in the HUMARA gene. HA carriers that demonstrated skewed XCI were further studied by whole-exome sequencing (WES) followed by X chromosome-targeted bioinformatic analysis. Results: All three HA carriers presenting with the moderate to severe HA phenotype due to skewed XCI were found to carry pathogenic mutations on their non-hemophilic X chromosomes. Patient 1 was diagnosed with a frameshift mutation in the PGK1 gene that was associated with familial XCI skewing in three generations. Patient 2 was diagnosed with a missense mutation in the SYTL4 gene that was associated with familial XCI skewing in two generations. Patient 3 was diagnosed with a nonsense mutation in the NKAP gene that was associated with familial XCI skewing in two generations. Conclusion: Our results indicate that the main reason for skewed XCI in our female HA patients was negative selection against cells with a disadvantage caused by an additional deleterious mutation on the silenced X chromosome, thus complicating the phenotype of a monogenic X-linked disease. Based on our study, we are currently offering the X inactivation test to symptomatic hemophilia carriers and plan to expand this approach to symptomatic carriers of other X-linked diseases, which can be further used in pregnancy planning.     

Australian Coral as a Biomaterial: Characteristics

In order to produce effective implants, the materials used must be biocompatible. Hydroxyapatite (HAp) is a bioactive material similar to the mineral component of teeth and bone which is often used for orbital implants and bone graft applications. HAp can be manufactured from corals via hydrothermal conversion. Coral is particularly useful as a starting material for hydroxyapatite production because of its porous nature. When a porous structure is used tissue ingrowth can occur readily and hence an excellent mechanical bond can be achieved. A large pore size and a high degree of pore interconnections are desirable implant properties. In the present paper a comparison of the properties of four different species of Australian coral has been made to determine the most favourable species to use as a starting material for hydrothermal conversion.