From Poldhu to the Italian station of Coltano: Marconi and the first years of transcontinental wireless

This paper presents the evolution of low-frequency, high-power transcontinental transmission, starting from the first successful transatlantic link from Poldhu up to the Italian transcontinental station of Coltano. The trend toward higher and higher transmitting power, and the dead end into which wireless was heading if it were not for research in the higher frequency ranges, are pointed out.     

Surface tension as a limiting factor for aerobic n-alkane biodegradation

A new mathematical model for n-alkane biodegradation in crude oil, heavy oil and paraffinic mixtures is described. The pattern of n-alkane degradation as a function of the inverse of hydrocarbon chain length reported in this paper can be considered as general behaviour for many aerobic n-alkane biodegradation processes. A new interpretation of n-alkane biodegradation as a function of surface tension, is given. A mathematical expression was obtained starting from the degradation values of n-alkane and relative surface tension, which is a parameter independent of fermentation conditions. An interesting parameter, b, was identified which represented the accelerating conversion factor for n-alkane biodegradation. The findings suggested that the n-alkane biodegradation. The findings suggested that he n-alkane biodegradation rate may be affected by the fermentation condition (agitation, aeration, etc.) and by the strain of microorganism, while the behaviour pattern of n-alkane degradation was essentially linked to the substrate characteristics (molecular structure, molecular weight and density).     

Long-term evaluation of the ventricular defibrillation energy requirement

INTRODUCTION: Defibrillation energy requirements in patients with nonthoracotomy defibrillators may increase within several months after implantation. However, the stability of the defibrillation energy requirement beyond 1 year has not been reported. The purpose of this study was to characterize the defibrillation energy requirement during 2 years of clinical follow-up. METHODS AND RESULTS: Thirty-one consecutive patients with a biphasic nonthoracotomy defibrillation system underwent defibrillation energy requirement testing using a step-down technique (20, 15, 12, 10, 8, 6, 5, 4, 3, 2, and 1 J) during defibrillator implantation, and then 24 hours, 2 months, 1 year, and 2 years after implantation. The mean defibrillation energy requirement during these evaluations was 10.9+/-5.5 J, 12.3+/-7.3 J, 11.7+/-5.6 J, 10.2+/-4.0 J, and 11.7+/-7.4 J, respectively (P = 0.4). The defibrillation energy requirement was noted to have increased by 10 J or more after 2 years of follow-up in five patients. In one of these patients, the defibrillation energy requirement was no longer associated with an adequate safety margin, necessitating revision of the defibrillation system. There were no identifiable clinical characteristics that distinguished patients who did and did not develop a 10-J or more increase in the defibrillation energy requirement. CONCLUSION: The mean defibrillation energy requirement does not change significantly after 2 years of biphasic nonthoracotomy defibrillator system implantation. However, approximately 15% of patients develop a 10-J or greater elevation in the defibrillation energy requirement, and 3% may require a defibrillation system revision. Therefore, a yearly evaluation of the defibrillation energy requirement may be appropriate.     

The AFLATOX® Project: Approaching the Development of New Generation,Natural-Based Compounds for the Containment of the Mycotoxigenic Phytopathogen Aspergillus flavus and Aflatoxin Contamination

The control of the fungal contamination on crops is considered a priority by the sanitary authorities of an increasing number of countries, and this is also due to the fact that the geographic areas interested in mycotoxin outbreaks are widening. Among the different pre- and post-harvest strategies that may be applied to prevent fungal and/or aflatoxin contamination, fungicides still play a prominent role; however, despite of countless efforts, to date the problem of food and feed contamination remains unsolved, since the essential factors that affect aflatoxins production are various and hardly to handle as a whole. In this scenario, the exploitation of bioactive natural sources to obtain new agents presenting novel mechanisms of action may represent a successful strategy to minimize, at the same time, aflatoxin contamination and the use of toxic pesticides. The Aflatox^® Project was aimed at the development of new-generation inhibitors of aflatoxigenic Aspergillus spp. proliferation and toxin production, through the modification of naturally occurring molecules: a panel of 177 compounds, belonging to the thiosemicarbazones class, have been synthesized and screened for their antifungal and anti-aflatoxigenic potential. The most effective compounds, selected as the best candidates as aflatoxin containment agents, were also evaluated in terms of cytotoxicity, genotoxicity and epi-genotoxicity to exclude potential harmful effect on the human health, the plants on which fungi grow and the whole ecosystem.     

Fine coal desulphurization by leaching with bromine containing hydrobromic acid

Sulphur extraction from coal by leaching with bromine-containing aqueous hydrobromic acid has been investigated in the temperature range from ambient to 120 °C. This procedure was found to be selective for the removal of high levels of sulphate and pyritic sulphur within a few minutes of leaching, while no significant reduction of the organic sulphur could be observed. Leaching led to an appreciable reduction of the ash yield and the up-take of substantial quantities of bromine. The bromine can be removed as hydrogen bromide by thermal treatment under nitrogen, without significant loss of volatile matter; for reduction of the bromine level to below 0.1 wt%, treatment for at least 1 h at ≈ 500 °C was needed.     

Effects of hydrological changes on cooperation in transnational catchments: the case of the Syr Darya

Water allocation along the Syr Darya River may be affected by climate change. Here we statistically model cooperation strategies, country profits, and sensitivity of cooperation, showing that the hydrological regime affects transboundary cooperation. Climate change in the twenty-first century may reduce glacial cover, and reducing stream flows, decreasing chances of cooperation and potentially raising conflicts. Comparison with other transboundary catchments in Central Asia indicates moderate-to-high risk of conflicts for the Syr Darya. A template is provided for assessment of the stability of cooperation in the Syr Darya basin, and in catchments similarly dependent on water availability.     

Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

Black‐box position and attitude tracking for underwater vehicles by second‐order sliding‐mode technique

In this work we address the tracking control problems for autonomous underwater vehicles (AUVs). The proposed solution is based on the variable structure systems (VSS) theory and, in particular, on the second‐order sliding‐mode (2‐SM) methodology. The tuning of the controller is carried out via black‐box approach, dispensing with the knowledge of the actual AUV parameters, by simply progressively increasing a single gain parameter. The presented stability analysis includes explicitly the unmodelled actuator dynamics and the presence of external uncertain disturbances. The good performance of the proposed scheme is verified by means of simulations on a 6‐DOF AUV. Copyright © 2009 John Wiley & Sons, Ltd.     

A Survey of Airworthiness and Certification for UAS

The Italian SMAT project is a civilian program supported by Piemonte Region developed for the territorial monitoring and surveillance and for the prevention of natural hazards. In a different way from the previous surveillance programs, the SMAT project is based on the use of several unmanned platforms that are able to cooperate through ground coordination and control station. The flight in non-segregated airspace, needed in order to accomplish the territorial monitoring mission, is a main issue to be investigated and defined, because of the current lack of a common consensus and agreement on the regulations of UAS. The present work outlines the international initiatives that deal with the development of the regulatory framework on airworthiness and certification of UAS and their potential impact on the SMAT project.