Studies on miscibility of blends of ethylene methyl acrylate and polydimethyl siloxane rubber

Blends of ethylene methyl acrylate (EMA) and poly(dimethylsiloxane) rubber (PDMS) are demonstrated to be miscible. The miscibility results in a single and composition-dependent glass transition temperature. IR spectra of the blends provide direct evidence of chemical reaction between EMA and PDMS rubber.     

Kinetics of vinyl polymerization initiated by potassium permanganate/β-hydroxybutyric acid redox system

The aqueous polymerization of acrylamide initiated by potassium permanganate/β-hydroxybutyric acid has been studied volumetrically at 35 ± 0.01°C in an inert medium. The rate of polymerization shows nearly square root dependence on β-hydroxybutyric acid at low concentration (3.12 – 12.5 · 10^?3 mol dm^?3). The order with respect to potassium permanganate has been found to be 0.6 indicating thereby a bimolecular mode of termination. The polymerization rate has been varied linearly at low monomer concentrations i.e. from 2.5 –7.0 · 10^?2 mol dm^?3. The dependence of number average degree of polymerization on the initial rate of polymerization and temperature has been determined. The over-all activation energy has been found to be 51.66 kJ mol^?1. A kinetic reaction scheme is proposed on the basis of experimental results.     

Studies on graft copolymerization of 4‐vinylpyridine onto guar gum

Graft copolymerization of 4‐vinylpyridine (4‐VP) onto guar gum (GOH) using potassium monopersulfate (PMS)/thioacetamide (TAA) as a redox pair was studied in an aqueous medium under inert atmosphere. The concentration of potassium monopersulfate and thioacetamide should be 1.0 × 10^?2 and 5.0 × 10^?3 mol dm^?3, respectively, for highest grafting ratio and efficiency. Efficient grafting was observed at 19.25 × 10^?2 and 4.87 × 10^?2 mol dm^?3 concentration of 4‐vinylpyridine and sulfuric acid, respectively. The optimum temperature for grafting is 30°C. As the time period of reaction is increased, the grafting ratio increases, whereas efficiency decreases. The plausible mechanism of grafting has been suggested. A sample of guar gum and guar‐ g‐4‐vinylpyridine were subjected to thermogravimetric analysis with the objective of studying the effect of grafting 4‐vinylpyridine on the thermal stability of guar gum. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2380–2385, 2002     

Graft copolymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto carboxymethylcellulose (sodium salt) by H2O2/Fe+2 redox pair

The effect of the reaction conditions on the grafting parameters during grafting of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid onto sodium carboxymethylcellulose using H₂O₂/Fe⁺² redox pair are studied at 30°C. The grafting ratio, add on, and conversion initially increase with the H₂O₂ concentration in the range of (10.0–15.0) × 10^?2 mol dm^?3. Thereafter, these parameters decrease with the H₂O₂ concentration. The grafting ratio, add on, and conversion increase when increasing the ferrous ion concentration from (0.5 to 4.0) × 10^?2 mol dm^?3 and decrease with a further increase in the concentration. It is observed that the grafting ratio and add on increase with the monomer concentration, whereas the conversion decrease. The hydrogen ions seem to be facilitating the grafting reaction up to a certain concentration and after this concentration seem to be retarding the process. The grafting ratio, add on, and conversion decrease with the sodium carboxymethylcellulose concentration. When increasing the time period from 60 to 90 min, the grafting parameters increase but decrease thereafter. Similarly, when increasing the temperature from 25 to 30°C, the grafting parameters increase and decrease thereafter. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4819–4825, 2006     

Gas Transfer During Bubbler Destratification of Reservoirs

In this paper, dimensional analysis has been carried out to derive general equations that predict: the total gas transferred to the ambient reservoir water from an air bubbler, total volume entrained, and total energy consumed for a known or equivalent linear stratification. The equations are tested by comparison with a one-dimensional bubbler model developed by the authors. It is shown that the oxygen transfer to the water column can be significant if small bubbles are used. The mechanical destratification efficiency ηmech (%), destratification time per unit surface area Γ?(s/m2), oxygen dissolution efficiency Ω (%), and oxygen transferred per unit input energy are examined as functions of bubble size. It is concluded that an average bubble radius of 1?mm should be considered for design purposes. However, if oxygen transfer from the bubbler is not considered important, then a bubble size of up to 4?mm is acceptable for destratification purposes.     

Cardanol grafted natural rubber: A green substitute to natural rubber for enhancing silica filler dispersion

Natural rubber (NR) usage is wide‐spread from pencil erasers to aero tyres. Carbon black and silica are the most common reinforcing fillers in the rubber industries. Carbon black enhances the mechanical properties, while silica reduces the rolling resistance and enhances the wet grip characteristics. However, the dispersion of polar silica fillers in the nonpolar hydrocarbon rubbers like natural rubber is a serious issue to be resolved. In recent years, cardanol, an agricultural by‐product of the cashew industry is already established as a multifunctional additive in the rubber. The present study focuses on dispersion of silica filler in natural rubber grafted with cardanol (CGNR) and determination of its technical properties. The optimum cure time reduces and the cure rate increases for the CGNR vulcanizates as compared to that of the NR vulcanizates at all loadings of silica varying from 30 to 60 phr. The interaction between the phenolic moiety of cardanol and the siloxane as well as silanol functional groups present on the silica surface enhances the rubber–filler interaction which leads to better reinforcement. The crosslink density and bound rubber content are found to be higher for the silica reinforced CGNR vulcanizates. The physico‐mechanical properties of the silica reinforced CGNR vulcanizates are superior to those of the NR vulcanizates. The CGNR vulcanizates show lower compression set and lower abrasion loss. The dynamic‐mechanical properties exhibit less Payne effect for silica reinforced CGNR vulcanizates as compared to the NR vulcanizates. The transmission electron photomicrographs show uniform dispersion of silica filler in the CGNR matrix. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43057.     

Meticulous analysis and consequences of microstructure changes on melt rheology and dynamic viscoelasticity of thermoplastic vulcanizates upon reprocessing

Thermoplastic vulcanizates (TPVs), which are a special class of elastomer alloy, prepared by dynamic vulcanization possess unique morphology of finely dispersed micron‐size cross‐linked elastomeric particles in a continuous thermoplastic matrix. The present study investigates the microstructure formation of elastomeric phase and its associated morphological changes during reprocessing of TPVs based on poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] triblock co‐polymer (S‐EB‐S) and solution polymerized styrene butadiene elastomer (S‐SBR) by scanning electron microscopy and atomic force microscopy. Semi‐efficient and efficient sulfur‐based curing systems have been adopted to cure the elastomeric phase and a comparative study has been made to demonstrate and explain the effect of reprocessing on the melt rheology and dynamic viscoelasticity of the TPVs. The present work also provides a better insight and guidance to control the microstructure of the cross‐linked elastomeric phase to prepare selectively co‐continuous or dispersed phase morphology. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41182.     

Recovery of copper from a surface altered chalcopyrite contained ball mill spillage through bio-hydrometallurgical route

Bioleaching studies for chalcopyrite contained ball mill spillages are very scarce in the literature. We developed a process flow sheet for the recovery of copper metal from surface activated (600 °C, 15 min) ball mill spillage through bio-hydrometallurgical processing route. Bioleaching of the activated sample using a mixed meso-acidophilic bacterial consortium predominantly A. ferrooxidans strains was found to be effective at a lixiviant flow rate of 1.5 L/h, enabling a maximum 72.36% copper recovery in 20 days. Mineralogical as well as morphological changes over the sample surface were seen to trigger the bioleaching efficiency of meso-acidophiles, thereby contributing towards an enhanced copper recovery from the ball mill spillage. The bio-leach liquor containing 1.84 g/L Cu was purified through solvent extraction using LIX 84I in kerosene prior to the recovery of copper metal by electrowinning. Purity of the copper produced through this process was 99.99%.     

Guayule natural rubber composites: impact of fillers on their cure characteristics,dynamic and mechanical behavior

Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.

     

The level of polyaromatic hydrocarbons in kajal and surma of major Indian brands

Kajal and surma are eye cosmetics extensively used in Indian subcontinent. Kajal is prepared by burning of vegetable oil and butter oil while surma by grinding of the stones. High performance liquid chromatography and gas chromatography–mass spectrometry instruments were used for quantification and confirmation of 16 polyaromatic hydrocarbons (PAHs). Significant concentration of PAH was found in all the samples examined. The median concentration of PAH ranged from 0.14 (lowest, anthracene) to 31.18 μg g⁻¹ [dibenz(a,h)anthracene] in kajal sample and from not detectable concentration (naphthalene) to 197.47 μg g⁻¹ of benzo(a)pyrene in surma sample. Fifteen PAHs were detected in all the samples. Therefore the use of kajal and surma in eye should be strictly restricted.