Physico-chemical properties of ceramic pigments for high-temperature application

Heat resistant coatings are required primarily for stacks, exhaust pipes, reactors, space crafts and similar equipments that are permanently or occasionally exposed to elevated temperatures. High-temperature coatings are generally based on silicone resin with ceramic and metallic pigments. In this study, iron oxide, cobalt oxide (thermo chromic compound) and aluminum oxide are used for the preparation of four new types of coloured pigments. The thermal resistant characteristics of these ceramic pigments were studied by differential thermal analysis, thermo gravimetric analysis and differential scanning calorimetric analysis. These ceramic pigments are found to be thermally stable up to 400 °C.     

Fabrication of Functional Nanofibrous Ammonia Sensor

A nanofibrous sensor for ammonia gas is fabricated by electrospinning the composite of poly(diphenylamine) (PDPA) with poly(methyl methacrylate) (PMMA) onto the patterned interdigit electrode. The composite electrospun membrane shows interconnected fibrous morphology. Functional groups in PDPA and the high active surface area of the fibrous membrane make the device detect a lower concentration of ammonia with a good reproducibility. The sensing capability of the device is studied by monitoring the changes in resistance of the membrane with different concentrations of ammonia. The changes in resistance of the membrane shows linearity with the concentration of ammonia in the limit of 10 and 300 ppm. UV-visible spectroscopy reveals the mechanism of sensing ammonia by the membrane.     

Cuprates intermediate between one and two dimensions

The key elements in all known cuprate superconductors are lightly doped CuO_i-planes. Recently a new homologous series of compounds Sr_n–1Cu_n+1O_2n have been reported in which the planes contain a parallel array of line defects which form a trellis lattice with ladder-segments of the square lattice weakly coupled through triangular line defects. The width of the ladder segments is determined by the parameter n and varies from single chains to arbitrarily wide ladders. The magnetic properties of undoped compounds will be dominated by the properties of the ladders. Heisenberg s = 1/2 ladders can have a spin liquid groundstate with a spin gap if the number of rungs is odd so that a short range RVB groundstate is predicted for such trellis lattices. Using a t-J model to describe the doped material leads to the prediction of a d-wave RVB superconducting groundstate with a large spin gap.     

Direct synthesis and catalytic performance of ultralarge pore GaSBA-15 mesoporous molecular sieves with high gallium content

Mesoporous GaSBA-15 molecular sieves with different n_Si/n_Ga ratios have been directly synthesized using Pluronic 123 triblock polymer as a structure-directing agent by pH-adjusting method. The mesoporous materials have been characterized using ICP-AES, XRD, N₂ adsorption, ⁷¹Ga-MAS NMR, SEM and TEM. ICP-AES studies show a high amount of gallium incorporation on the silica pore walls. The structural and textural properties of calcined GaSBA-15 are characterized by XRD and N₂ adsorption. ⁷¹Ga MAS NMR results demonstrate that a high amount of tetrahedral-gallium could be substituted for Si in the framework of SBA-15. TEM and FE-SEM images show the uniform pore diameter and rope-like hexagonal mesoporous structure of GaSBA-15. These GaSBA-15 materials have been used as catalysts for vapour-phase t-butylation of 1,2-dihydroxybenzene (DHB) for selective synthesis of 4-t-butylcatechol (4-TBC) under different reaction conditions. GaSBA-15(10) gave the highest 93.2% conversion of DHB and 95.7% selectivity of 4-TBC as compared with other GaSBA-15 catalysts.     

Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers

Zinc dust and manganese powder as pigments were incorporated in epoxy-polyamide and butyl titanate medium, with different pigment volume concentration (PVC) ranging from 20 to 74. These protective coatings were coated on sand blasted mild steel substrates and immersed in 3 wt.% sodium chloride solution and the corrosion current was measured by the Tafel extrapolation method. From the corrosion current produced by these primers, the optimum level of the pigments in these binders was identified. Thus the protective performance of optimised primers was evaluated on a sand blasted mild steel surface by the Tafel polarisation method in 3 wt.% sodium chloride solution, over different periods of time. The results were found to be comparable with the salt spray test and galvanic current measurements. The manganese powder used for this investigation showed that it could be used as an alternative to zinc powder for metal rich primers.     

Efficiency,skin strength and sorptivity of fly ash concretes

Four grades of concrete with and without fly ash were devised and tested for compressive strength. The concretes were cured in three different curing regimes. The skin strength of concretes under inadequate curing was calculated by assuming a linear model for the variation of strength, and the strength difference between cement and fly ash concretes has been worked out. The skin strength of cement concretes was found to be higher than that of fly ash concretes. The test results were found to be affected by the size of the test specimen, when proper curing was not provided. The difference in sorptivity of fly ash and cement concretes cured for four days and not provided with any initial curing has been included. For all grades of concrete, the sorptivity of fly ash concrete was found to be marginally higher. The difference in sorptivity between fly ash and cement concretes was observed to increase as the strength of the mix decreased. The effect of initial curing was found to be highly significant. The sorptivity of samples with no curing was twice as much as those with four days initial curing. Besides the material properties, the age and strength of a fly ash concrete were also found to be important factors in determining the cementing efficiency of the fly ash.     

Synergic influence of a surfactant and ultrasonication on the preparation of soluble,conducting polydiphenylamine/silica‐nanoparticle composites

Conducting polydiphenylamine was used to encapsulate silica nanoparticles through the oxidative polymerization of diphenylamine in the presence of ultrasonic irradiation. The polymerization was performed in the presence of sodium lauryl sulfate as a surfactant. Experiments performed in the absence of ultrasound clearly demonstrated that the application of ultrasonication played multiple roles in the preparation of a composite of polydiphenylamine with silica nanoparticles. Ultrasonication dispersed the silica nanoparticles, converted sodium lauryl sulfate to lauryl alcohol, and augmented the dispersion of the silica‐nanoparticle/polydiphenylamine composite in an organic medium. Silica‐nanoparticle/polydiphenylamine composites were also prepared in the absence of ultrasound and/or sodium lauryl sulfate. The silica‐nanoparticle/polydiphenylamine composites were characterized with Fourier trans form infrared spectroscopy, ultraviolet–visible/near‐infrared spectroscopy, and thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3912–3918, 2006     

Peroxydisulfate initiated graft copolymerization of aniline onto poly(propylene) fiber—A kinetic approach

A novel method for the preparation of electrically conducting fibers through chemical grafting of electrically conducting polymer onto poly(propylene) (PP) fiber is described. The graft copolymerization of aniline (ANI) was performed in aqueous acidic medium by using a chemical oxidant such as peroxydisulfate (PDS). Grafting occurred with simultaneous homopolymer formation. The content of polyaniline in the backbone fiber was found to vary by varying [monomer], [initiator], and amount of PP fiber. Various graft parameters such as rate of grafting (R_g), % grafting, and % grafting efficiency were evaluated. The rate of homopolymerization (R_h) was also determined. Both R_h and R_g showed first‐order dependency on [ANI], [PDS], and amount of PP fiber variation. The chemical grafting was confirmed by use of cyclic voltammetry and conductivity measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3827–3834, 2003     

Novel electrically conductive and ferromagnetic composites of poly(aniline‐co‐aminonaphthalenesulfonic acid) with iron oxide nanoparticles: Synthesis and characterization

Nanocomposites of iron oxide (Fe₃O₄) with a sulfonated polyaniline, poly(aniline‐co‐aminonaphthalenesulfonic acid) [SPAN(ANSA)], were synthesized through chemical oxidative copolymerization of aniline and 5‐amino‐2‐naphthalenesulfonic acid/1‐amino‐5‐naphthalenesulfonic acid in the presence of Fe₃O₄ nanoparticles. The nanocomposites [Fe₃O₄/SPAN(ANSA)‐NCs] were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, elemental analysis, UV–visible spectroscopy, thermogravimetric analysis (TGA), superconductor quantum interference device (SQUID), and electrical conductivity measurements. The TEM images reveal that nanocrystalline Fe₃O₄ particles were homogeneously incorporated within the polymer matrix with the sizes in the range of 10–15 nm. XRD pattern reveals that pure Fe₃O₄ particles are having spinel structure, and nanocomposites are more crystalline in comparison to pristine polymers. Differential thermogravimetric (DTG) curves obtained through TGA informs that polymer chains in the composites have better thermal stability than that of the pristine copolymers. FTIR spectra provide information on the structure of the composites. The conductivity of the nanocomposites (～ 0.5 S cm^?1) is higher than that of pristine PANI (～ 10^?3 S cm^?1). The charge transport behavior of the composites is explained through temperature difference of conductivity. The temperature dependence of conductivity fits with the quasi‐1D variable range hopping (quasi‐1D VRH) model. SQUID analysis reveals that the composites show ferromagnetic behavior at room temperature. The maximum saturation magnetization of the composite is 9.7 emu g^?1. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Characterization and preparation of new multiwall carbon nanotube/conducting polymer composites by in situ polymerization

Composites based on poly(diphenyl amine) (PDPA) and multiwall carbon nanotubes (MWNTs) were prepared by chemical oxidative polymerization through two different approaches: in situ polymerization and intimate mixing. In in situ polymerization, DPA was polymerized in the presence of dispersed MWNTs in sulfuric acid medium for different molar composition ratios of MWNT and DPA. Intimate mixing of synthesized PDPA with MWNT was also used for the preparation of PDPA/MWNT composites. Transmission electron microscopy revealed that the diameter of the tubular structure for the composite was 10–20 nm higher than the diameter of pure MWNT. Scanning electron microscopy provided evidence for the differences in the morphology between the MWNTs and the composites. Raman and Fourier transform IR (FTIR) spectroscopy, thermogravimetric analysis, X‐ray diffraction, and UV–visible spectroscopy were used to characterize the composites and reveal the differences in the molecular level interactions between the components in the composites. The Raman and FTIR spectral results revealed doping‐type molecular interactions and coordinate covalent‐type interactions between MWNT and PDPA in the composite prepared by in situ polymerization and intimate mixing, respectively. The backbone structure of PDPA in the composite decomposed at a higher temperature (>340°C) than the pristine PDPA (～300°C). This behavior also favored the molecular level interactions between MWNT and PDPA in the composite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3721–3729, 2006