Effects of Surface Concentration on Drying Behavior of Carbohydrate Solutions

As the surface properties of the drying materials are very important not only for the drying rate but also for the quality change during drying, the effects of surface concentration on the drying behavior of liquid foods (sugar solutions) were investigated by isothermal drying experiments and by numerical calculation experiments. The isothermal drying experiments with gelled sugar solution systems (sucrose and maltodextrin) were carried out at various relative humidity (RH) values (RH = 0 to 84%). Separate experiments were carried out for determination of the desorption isotherms.

The isothermal drying curves of sugar solutions at RH = 0 to 51% were very similar. Numerical simulations also showed that the drying curves of these sugars at the surface concentration = 0 and 0.1 are almost the same, although the concentration distributions are different.

When a small amount of gelatin was added to sugar solutions, the drying rate decreased remarkably as the gelatin might form a thin film (skin) near the surface, and consequently the retention of ethanol increased.     

Distance spectrum analysis of space-time trellis-coded Modulations in quasi-static Rayleigh-fading channels

In this correspondence, we propose an algorithm for computing the distance spectrum of a space-time trellis code achieving maximal diversity gain in quasi-static fading channels. We further present a state reduction technique for trellis codes that can reduce the complexity of the distance spectrum computation. We provide numerical results supporting the empirical evidence that a truncated union bound obtained from the distance spectrum provides an accurate characterization of the relative performance ordering of different space-time trellis codes and, therefore, it offers a tool for better space-time trellis code design.     

The inositol-1,4,5-trisphosphate system is involved in rapid effects of aldosterone in human mononuclear leukocytes

There is increasing evidence for rapid steroid action on electrolyte transport in human mononuclear leukocytes (HML). In HML, aldosterone stimulates the Na+/H+ antiporter within a few minutes. Because a variety of hormones and growth factors activate the Na+/H+ antiporter via protein kinase C and inositol phospholipids, a possible involvement of inositol-1,4,5-trisphosphate (IP3) in the rapid effects of aldosterone in HML was investigated. The stimulation of IP3 generation was started by the addition of aldosterone, concanavalin A, or other steroids. A significant increase in IP3 levels by aldosterone (1 nmol/L, P < 0.05) was found after 1 min, similar to that found after concanavalin A (25 micrograms/mL). Aldosterone caused a concentration-dependent elevation of IP3 levels, with an apparent EC50 of approximately 0.1 nmol/L. Fludrocortisone stimulated IP3 generation at similar concentrations, whereas a weaker IP3 stimulation by glucocorticoids (hydrocortisone, dexamethasone) occurred at micromolar concentrations only. Canrenone, a potent inhibitor of classical aldosterone action, was not effective up to a concentration of 100 nmol/L. These findings show kinetic and pharmacological similarities with both the functional data on Na+/H+ antiport stimulation by aldosterone and the studies of 125I-aldosterone binding to plasma membranes of HML. Thus, these data are the first to indicate an involvement of the phosphoinositide pathway in the rapid membrane effects of aldosterone.     

Numerical simulation of developing natural convection in an enclosure due to rapid heating

Effects of thermoacoustic wave motion on the developing natural convection process in a compressible gas-filled square enclosure were investigated numerically. In the cases considered, the left wall temperature is raised rapidly (impulsively or gradually) while the right wall is held at a specified temperature. The top and the bottom walls of the enclosure considered are thermally insulated. The numerical solutions of the full Navier-Stokes equations were obtained by employing a highly accurate flux-corrected transport algorithm for the convection terms and by a central differencing scheme for the viscous and diffusive terms. The strength of the pressure waves associated with the thermoacoustic effect and resulting flow patterns are found to be strongly correlated to the rapidity of the wall heating process. Fluid thermal diffusivity was found to affect the strength of the thermoacoustic waves and the resulting interaction with the buoyancy-induced flow.     

Visual, cognitive, and neurodevelopmental outcome at 51/2 years in children with perinatal haemorrhagic-ischaemic brain lesions

To determine predictive values of early visual and neurocognitive assessment in children with perinatally acquired haemorrhagic or ischaemic brain lesions selected on the basis of ultrasound, 63 children (37 boys, 26 girls), who had been followed and examined until the age of 18 months, were reexamined at 5 1/2 years. Good correlations between visual and neurodevelopmental assessments at 18 months and at 5 1/2 years were found. When ultrasound abnormalities were combined with early visual and neurocognitive assessment data, good predictive values, especially for the group of children who had grade 2 to 4 leukomalacia, were found for visual acuity and neurodevelopment.     

Design of a Commercial Hybrid VTOL UAV System

For the last four decades Unmanned Air Vehicles (UAVs) have been extensively used for military operations that include tracking, surveillance, active engagement with weapons and airborne data acquisition. UAVs are also in demand commercially due to their advantages in comparison to manned vehicles. These advantages include lower manufacturing and operating costs, flexibility in configuration depending on customer request and not risking the pilot on demanding missions. Even though civilian UAVs currently constitute 3 % of the UAV market, it is estimated that their numbers will reach up to 10 % of the UAV market within the next 5 years. Most of the civilian UAV applications require UAVs that are capable of doing a wide range of different and complementary operations within a composite mission. These operations include taking off and landing from limited runway space, while traversing the operation region in considerable cruise speed for mobile tracking applications. This is in addition to being able traverse in low cruise speeds or being able to hover for stationary measurement and tracking. All of these complementary and but different operational capabilities point to a hybrid unmanned vehicle concept, namely the Vertical Take-Off and Landing (VTOL) UAVs. In addition, the desired UAV system needs to be cost-efficient while providing easy payload conversion for different civilian applications. In this paper, we review the preliminary design process of such a capable civilian UAV system, namely the TURAC VTOL UAV. TURAC UAV is aimed to have both vertical take-off and landing and Conventional Take-off and Landing (CTOL) capability. TURAC interchangeable payload pod and detachable wing (with potential different size variants) provides capability to perform different mission types, including long endurance and high cruise speed operations. In addition, the TURAC concept is to have two different variants. The TURAC A variant is an eco-friendly and low-noise fully electrical platform which includes 2 tilt electric motors in the front, and a fixed electric motor and ducted fan in the rear, where as the TURAC B variant is envisioned to use high energy density fuel cells for extended hovering time. In this paper, we provide the TURAC UAV’s iterative design and trade-off studies which also include detailed aerodynamic and structural configuration analysis. For the aerodynamic analysis, an in-house software including graphical user interface has been developed to calculate the aerodynamic forces and moments by using the Vortex Lattice Method (VLM). Computational Fluid Dynamics (CFD) studies are performed to determine the aerodynamic effects for various configurations For structural analysis, a Finite Element Model (FEM) of the TURAC has been prepared and its modal analysis is carried out. Maximum displacements and maximal principal stresses are calculated and used for streamlining a weight efficient fuselage design. Prototypes have been built to show success of the design at both hover and forward flight regime. In this paper, we also provide the flight management and autopilot architecture of the TURAC. The testing of the controller performance has been initiated with the prototype of TURAC. Current work focuses on the building of the full fight test prototype of the TURAC UAV and aerodynamic modeling of the transition flight.     

On the design considerations of solid-state power amplifiers for satellite communications: A systems perspective

Conventional solid-state power amplifier (SSPA) design approach isolates radio frequency (RF) design from communication theory. In this paper, a unified SSPA design approach is proposed, which optimizes SSPA parameters (bias voltage and input RF signal power) to minimize total DC power consumption while satisfying received SNR constraint specified by the link budget. The effect of SSPA nonlinearity is quantified by the error vector magnitude measured at its output and the corresponding received SNR degradation is analyzed. Using the quantitative metrics for received SNR, it is possible to evaluate highly nonlinear SSPA classes such as Class-B or deep-Class AB, which are normally not considered in conventional SSPA design approach to be used in satellite communication applications.     

A variational approach to problems in calibration of multiple cameras

This paper addresses the problem of calibrating camera parameters using variational methods. One problem addressed is the severe lens distortion in low-cost cameras. For many computer vision algorithms aiming at reconstructing reliable representations of 3D scenes, the camera distortion effects will lead to inaccurate 3D reconstructions and geometrical measurements if not accounted for. A second problem is the color calibration problem caused by variations in camera responses that result in different color measurements and affects the algorithms that depend on these measurements. We also address the extrinsic camera calibration that estimates relative poses and orientations of multiple cameras in the system and the intrinsic camera calibration that estimates focal lengths and the skew parameters of the cameras. To address these calibration problems, we present multiview stereo techniques based on variational methods that utilize partial and ordinary differential equations. Our approach can also be considered as a coordinated refinement of camera calibration parameters. To reduce computational complexity of such algorithms, we utilize prior knowledge on the calibration object, making a piecewise smooth surface assumption, and evolve the pose, orientation, and scale parameters of such a 3D model object without requiring a 2D feature extraction from camera views. We derive the evolution equations for the distortion coefficients, the color calibration parameters, the extrinsic and intrinsic parameters of the cameras, and present experimental results.