The influence of volume fraction of amorphous phase on corrosion resistance of Mg67Zn 29Ca 4 alloy

The aim of this study was to investigate the structure and corrosion resistance of amorphous, amorphous‐crystalline, and crystalline Mg₆₇Zn₂₉Ca₄ alloy for biodegradable applications. This paper presents a preparation method and results of the structural characterization and corrosion resistance analysis of the material. Samples were prepared in the form of 3 mm diameter rods. The structure of the alloy was examined with the use of X‐ray diffractometry and scanning electron microscopy. The thermal properties of the samples were examined with differential scanning calorimetry (DSC). Results of DSC analysis were used to determine heat treatment temperatures, allowing to obtain different fractures of crystalline phase in the material. Corrosion resistance of heat‐treated samples was investigated by immersion tests and electrochemical measurements performed in the simulated body fluid. The X‐ray diffraction results confirmed that the prepared Mg₆₇Zn₂₉Ca₄ alloy's structure is fully amorphous. After heat treatment, samples with different fractions of amorphous phase in the structure were obtained. Immersion tests of the samples showed that the structure significantly influenced corrosion resistance in examined materials. It should be pointed out, that certain amounts of crystalline phase in amorphous matrix can greatly improve the corrosion resistance of Mg₆₇Zn₂₉Ca₄ alloy.     

Anodising potential influence on well-ordered nanostructures formed by anodisation of aluminium in sulphuric acid

High-density structures with relatively well-ordered nanopore arrays have been obtained by the self-ordering growth of nanopores occurring during anodisation of aluminium in sulphuric acid. The resulting array of well-ordered nanopores strongly depends on an applied voltage of anodising, temperature and a procedure of synthesis. Regular arranged hexagonal arrays on aluminium with a relatively uniform pore diameter, interpore distance, and depth of pores exceeding 90 μm, can be formed by the self-ordering two-step anodising at 1 °C. The interpore distance and the pore diameter were evaluated on anodised aluminium layers obtained at different cell potentials ranging from 15 to 25 V. The detailed analyses of their uniformity were performed from SEM images. The analysis of a pore arrangement defects was made from SEM top view images taken on samples anodised at various cell potentials. The defect maps, known as Delaunay triangulations, of the arrangement of about 1000 pores were constructed for different applied anodising potentials. The percentage of pores that are not six-fold coordinated by the neighbouring pores indicates the percentage of defected surface.     

Effects of uncontrollability on subsequent decision making: Testing the cognitive exhaustion hypothesis.

The cognitive exhaustion model of helplessness (predicting withdrawal from constructive effortful processing after uncontrollability) was applied to decision making. After unsolvable problems (or no preexposure), Ss requested information from a matrix with 5 alternatives (films)?×?10 attributes and then chose the best film. Films in a set were either similar (difficult decision) or dissimilar (easy decision) in attractiveness. As predicted, Ss with an uncontrollable preexposure spent less time on predecisional information search, disregarded their own importance criteria when asking for information, and had attention highly focused on a selected option for the easy decision condition but diffused across options for the difficult decision condition. The implications of these findings for understanding cognitive mechanisms of learned helplessness and depression are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Nephropathy of type II diabetes: evidence for hereditary factors?

Family studies point to an important genetic element in the genesis of diabetic nephropathy, but it is not known whether renal abnormalities are present prior to the onset of diabetes. To address this issue we examined all consecutive patients suffering from type II diabetes with a duration of more than 10 years who attended a diabetes outpatient clinic. Ninety-four patients had nephropathy, 307 did not. All offspring who were phenotypically normal (no hypertension, normal oral glucose tolerance, non-smoking) and agreed to participate were examined, 26 from nephropathic and 30 from non-nephropathic diabetic parents. They were compared with 30 offspring matched for age, gender and BMI from non-diabetic parents as controls. We measured urinary albumin excretion under baseline conditions and at several time points after ingestion of 300 g cooked beef and submaximal treadmill exercise, respectively. In addition, casual blood pressure, ambulatory blood pressure, urinary albumin and urinary alpha-1-microglobulin were measured. Primary renal disease was excluded by clinical examination. Under baseline conditions, median urinary albumin excretion rate (AER; microgram/min) was significantly (P < 0.005) higher in offspring of nephropathic type II diabetic patients (7.8; range 1.04 to 19.5) than in the offspring of non-nephropathic type II diabetic patients (4.8; 0.36 to 17.5) and controls (4.4; 0.16 to 18.4). Submaximal treadmill exercise caused a greater proportional increase of AER in offspring of nephropathic type II diabetics (median 16-fold) than in offspring of non-nephropathic diabetic patients (6.3-fold) or controls (4.8-fold). In offspring of nephropathic diabetic patients casual and particularly ambulatory systolic blood pressures were significantly higher, but AER was not correlated with blood pressure. In summary, higher values, albeit within the normal range, for baseline and postexercise albuminuria were noted in phenotypically normal offspring of parents with type II diabetes and nephropathy. The observation suggests that changes in transglomerular albumin traffic are demonstrable prior to the onset of diabetes and diabetic nephropathy in subjects with a potential genetic predisposition to these conditions.     

Embedding linear orders in grids

A grid (or a mesh) is a two-dimensional permutation: an m× n-grid of size mn is an m× n-matrix where the entries run through the elements {1,2, …, mn}. We prove that if δ₁ and δ₂ are any two linear orders on {1,2, …, N}, then they can be simultaneously embedded (in a well defined sense) into a unique grid having the smallest size.     

The Potential Role of Small-Molecule PERK Inhibitor LDN-0060609 in Primary Open-Angle Glaucoma Treatment

Primary open-angle glaucoma (POAG) constitutes the most common type of glaucoma. Emerging evidence suggests that Endoplasmic Reticulum (ER) stress and the protein kinase RNA-like endoplasmic reticulum kinase (PERK)-mediated Unfolded Protein Response (UPR) signaling pathway play a key role in POAG pathogenesis. Thus, the main aim of the study was to evaluate the effectiveness of the PERK inhibitor LDN-0060609 in cellular model of glaucoma using primary human trabecular meshwork (HTM) cells. To evaluate the level of the ER stress marker proteins, Western blotting and TaqMan gene expression assay were used. The cytotoxicity was measured by XTT, LDH assays and Giemsa staining, whereas genotoxicity via comet assay. Changes in cell morphology were assessed by phase-contrast microscopy. Analysis of apoptosis was performed by caspase-3 assay and flow cytometry (FC), whereas cell cycle progression by FC. The results obtained have demonstrated that LDN-0060609 triggered a significant decrease of ER stress marker proteins within HTM cells with induced ER stress conditions. Moreover, LDN-0060609 effectively increased viability, reduced DNA damage, increased proliferation, restored normal morphology, reduced apoptosis and restored normal cell cycle distribution of HTM cells with induced ER stress conditions. Thereby, PERK inhibitors, such as LDN-0060609, may provide an innovative, ground-breaking treatment strategy against POAG.     

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Metallurgical and Materials Transactions A - A number of non-equimolar refractory high entropy alloys (RF HEAs) from the Al–Ti–Mo–Nb–V system are synthesized, with the...     

Effect of Mode of Drying on Microstructure of Potato

Potato v. Irga was subjected to blanching, and thereafter was dried by convection, puff-drying, and freeze-drying. Microstructure of raw, blanched, and dried tissue was analyzed under the light microscope using computer image analysis. It was found that the tissue of the investigated variety is built up from cells much smaller than those described in literature for other cultivars. Blanching caused starch gelatinization and increase of cross-sectional area of cells. There was no evidence of broken cell walls. Convective drying resulted in cell shrinkage and some breaking of cell walls. It was estimated that some 12% of cells lost integrity during drying. Limited disintegration of the tissue caused by convective drying is attributed to small size of cells, large contact area, and high cohesive forces between cells. Puff-drying damaged the tissue much more than the convective drying. The most devastating to tissue microstructure was freeze-drying, probably freezing per se.     

Hypermobile Robots – the Survey

This article presents a survey on hypermobile robots – a group of articulated mobile robots that typically comprise of several segments with powered wheels, tracks, or legs to propel the vehicle forward. Segments are connected by 2- or 3-degree-of-freedom (DOF) joints that may or may not be powered and provide better mobility as compared with regular mobile robots. The origins are analyzed and over 14 projects are compared in order to find the best methodology of designing and developing hypermobile robots.