Correction to: EKLT: Asynchronous Photometric Feature Tracking Using Events and Frames

International Journal of Computer Vision - The original version of this article was unfortunately omitted to publish the footnote “The best result per row is highlighted in bold” in...     

Three-phase four-wire shunt active power filter based on the SOGI filter and Lyapunov function for DC bus control

The three-phase four-wire shunt active power filter (SAPF) was developed to suppress the harmonic currents generated by nonlinear loads, and for the compensation of unbalanced nonlinear load currents, reactive power, and the harmonic neutral current. In this work, we consider instantaneous reactive power theory (PQ theory) for reference current identification based on the following two algorithms: the classic low-pass filter (LPF) and the second-order generalized integrator (SOGI) filter. Furthermore, since an important process in SAPF control is the regulation of the DC bus voltage at the capacitor, a new controller based on the Lyapunov function is also proposed. A complete simulation of the resultant active filtering system confirms its validity, which uses the SOGI filter to extract the reference currents from the distorted line currents, compared with the traditional PQ theory based on LPF. In addition, the simulation performed also demonstrates the superiority of the proposed approach, for DC bus voltage control based on the Lyapunov function, compared with the traditional proportional-integral (PI) controller. Both novel approaches contribute towards an improvement in the overall performance of the system, which consists of a small rise and settling time, a very low or nonexistent overshoot, and the minimization of the total harmonic distortion (THD).     

A rubber-modified thermoplastic where the morphology produced by phase-separation induced by polymerization disappears at high conversions

An unexpected experimental finding is reported where the primary morphology developed during polymerization-induced phase separation in a rubber-modified thermoplastic practically disappears at high conversions. This process was evidenced by light scattering (LS) and scanning electron microscopy (SEM) for a particular composition of solutions of polyisobutylene oligomers (PIB) in isobornylmethacrylate (IBoMA), during the free-radical polymerization of the monomer. The primary phase separation produced a dispersion of domains rich in PIB containing significant amounts of the monomer (IBoMA). Polymerization of the monomer in these domains occurred at high overall conversions producing the filling of dispersed domains with a PIBoMA-PIB blend that could not be distinguished from the matrix. Under these conditions the final material had the appearance of a homogeneous blend.     

Structure and mechanical properties of polyethylene-fullerene composites

The microhardness of films of fullerene-polyethylene composites prepared by gelation from semidilute solution, using ultrahigh molecular weight polyethylene (PE) (6×10⁶), has been determined. The composite materials were characterized by optical microscopy and X-ray diffraction techniques. The microhardness of the films is shown to increase notably with the concentration of fullerene particles within the films. In addition, a substantial hardening of the composites is obtained after annealing the materials at high temperatures (T _a=130 °C) and long annealing times (t _a=10⁵s). The hardening of the composites with annealing temperature has been identified with the thickening of the PE crystalline lamellae. Comparison of X-ray scattering data and the microhardness values upon annealing leads to the conclusion of phase separation of C₆₀ molecules from the polyethylene crystals within the material. The temperature dependence is discussed in terms of the independent contribution of the PE matrix of the C₆₀ aggregates to the hardness value.     

EEPROM transistor fabricated with stacked SiOx LPCVDfilms

The key fabrication steps and the write/erase characteristics of a new memory metal-insulator-silicon transistor are presented. The memory cell is composed of a single silicon gate and a stacked SiO_x LPCVD film as an active memory film. With this new arrangement, the memory device shows excellent endurance     

Theory,design, and evaluation of the rotating polarizer interferometer

We present the results of modeling the response of a Rotating Polarizer Interferometer (RPI), an actual design and the evaluation of it. The RPI was introduced almost 10 years ago by Erickson [1] and since then it has not received too much attention from the millimeter wave community despite its very attractive characteristics, this is perhaps due to a lack of proven designs to encourage potential users. Here we show that with proper design equations a predictable result can be achieved and that a working device with a low-loss dielectric filling (Teflon) is feasible     

Effect of local alloy disorder on the emission kinetics of deep donors (DX centers) in AlxGa1-xAs

In this paper we summarize our recent studies of the effects of local alloy disorder on the properties ofDX levels. A single emission rate is observed in GaAs where all Si-donors have identical local environments. In contrast, three discrete emission rates are observed in dilute AlGaAs alloys, suggesting that the group IV donor moves towards the interstitial site, thereby “selecting” three of the twelve surrounding group III atoms. We present evidence for an ordering of theDX levels consistent with Morgan’s model of a deepening potential well for theDX level as Al atoms are subsequently substituted for Ga atoms near the relaxed donor. These conclusions are consistent with earlier calculations of Chadi and Chang.     

Novel aspects of the microstructure of PP/PA blends prepared by reactive compounding as studied by microhardness

The microhardness of injection-moulded i-polypropylene/polyamide (iPP/PA) blends prepared by reactive compounding was determined. The formulation rules and processing technology for the preparation of these alloys was reported previously. iPP/PA compositions between 100/0 and 50/50 using functionalized PP with various degrees of mainchain grafting, were investigated. It is shown that the deviation of microhardness from the additivity law of the single components is mainly due to a decrease in the crystallinity of the iPP phase. The results are discussed in the light of the microstructural variations as revealed by X-ray diffraction methods.     

Characteristics of a NaOH-Activated Blast Furnace Slag Blended with a Fine Particle Silica Waste

Mortars of blast furnace slag blended with a geothermal silica waste at various replacement levels of 0%, 5%, 10%, 15%, and 20% were cured for up to 90 days. The binder was activated by 6 wt% Na₂O equivalent of sodium hydroxide. Lime was added as an activating agent and also to promote pozzolanic reaction with the silica. It was found that the presence of the silica waste increased the reactivity of the cementitious materials, as measured by means of nonevaporable water. The compressive strength was increased in the presence of the silica, except at the highest replacement level of 20%, the optimum silica replacement was that of 5%–10%. The microstructures of blended slag showed less porosity than those of neat slag mortars. The lime was completely consumed after 90 days of hydration.