Conceptual damage-sensitive features for structural health monitoring: Laboratory and field demonstrations

The use of damage-sensitive features to evaluate structural condition or health is a very critical aspect of structural health monitoring. The purpose of this paper is to investigate the potential of two different damage-sensitive features for detecting damage. Different damage scenarios are simulated on a large-scale laboratory structure and a three-span highway bridge for demonstration. The features presented in this paper are the modal flexibility-based deflection and curvature both of which are obtained directly from dynamic properties. In the literature, flexibility associated with mode shapes and mode shapes curvatures have been mostly explored. In this study, multi-input–multi-output dynamic data are used to obtain modal flexibility, which is a close approximation to the actual flexibility. A main novelty is that the curvature is calculated from the deflected shapes using the modal flexibility as opposed to using modal vectors. In this paper, the theory of the methodology is explained and then experimental studies and results are presented. For the experimental studies, the laboratory specimen and the three-span bridge were gradually damaged. It is shown that both deflection and curvature are conceptual and physically meaningful features for damage detection and localization. The issues and the requirements for these features to perform successfully are also presented.     

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for no reduction by NH3

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO₂ for NO reduction by NH₃ was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO₂ feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH₄)₂SO₄ and/or (NH₄)HSO₄ from the results of TGA and ion-chromatography measurement.     

Ultrahigh molecular weight polyethylene with improved crosslink density,oxidation stability,and microbial inhibition by chemical crosslinking and tea polyphenols for total joint replacements

Highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) stabilized by vitamin E (VE) is widely applied in artificial joints as the bearings. Despite the approval, there is a discord that VE lowers the crosslinking efficiency, limiting its use at high concentration. In this work, we aim to obtain highly crosslinked and oxidation resistant UHMWPE through the conjunction of tea polyphenol and chemical crosslinking. We hypothesized that highly incorporated tea polyphenol with multiple reactive sites can ameliorate crosslinking efficiency of chemical crosslinked UHMWPE in comparison to VE. Epigallocatechin gallate (EGCG) as representative tea polyphenol was incorporated into UHMWPE at high concentration (2–8 wt%), followed by chemical crosslinking with 2 wt% organic peroxide. Unlike VE/UHMWPE blends as the control, chemical crosslinking achieved an increasing trend in crosslink density of EGCG/UHMWPE blends with increasing antioxidant concentration. High concentration of EGCG also enhanced the oxidation stability of UHMWPE. Intriguingly, EGCG endowed UHMWPE with an excellent antimicrobial property, which was inefficient in VE/UHMWPE. Cell viability was hardly affected by the high loaded antioxidant and peroxide. The chemically crosslinked UHMWPE blended with EGCG is proved to be a reasonable, cost effective and realistic alternative for use in artificial joints.     

Performance analysis of multimedia based web traffic with QoS constraints

During the recent years, there has been a tremendous growth in the development and deployment of multimedia based networked applications such as video streaming, IP telephony, interactive games, among others. These applications, in contrast to elastic applications such as email and data sharing, are delay and delay jitter sensitive but can tolerate certain level of packet loss. A vital element of end-to-end delay and delay jitter is the random queueing delays in network switches and routers. Analysis of robust mechanisms for buffer management at network routers needs to be carried out in order to reduce end-to-end delay for traffic generated by multimedia applications. In this context, a threshold based buffer management scheme for accommodating multiple class multimedia traffic in network routers has been analysed. This technique effectively controls the allocation of buffer to various traffic classes according to their delay constraints. The forms of the joint state probabilities, as well as basic performance measures such as blocking probabilities are analytically established at equilibrium. Typical numerical experiments are included to illustrate the credibility of the proposed mechanism in the context of different quality of service (QoS) grades for various network traffic classes. This model, therefore, can be used as a powerful tool to provide a required grade of service to a particular class of multimedia based web traffic in any heterogeneous network.     

A class-based scheme for E-commerce web servers: Formal specification and performance evaluation

This paper is an investigation into the performance of E-commerce applications. E-commerce has become one of the most popular applications of the web as a large population of web users is now benefiting from various on-line services including product searches, product purchases and product comparison. E-commerce provides users with 24-7 shopping facilities. However, the consequence of these benefits and facilities is the excessive load on E-commerce web servers and the performance degradation of E-commerce (eCom) requests they process. This paper addresses this issue and proposes a class-based priority scheme which classifies eCom requests into high and low priority requests. In E-commerce, some requests (e.g. payment) are generally considered more important than others (e.g. search or browse). We believe that by assigning class-based priorities at multiple service levels, E-commerce web servers can perform better and can improve the performance of high priority eCom requests. In this paper, we formally specify and implement the proposed scheme and evaluate its performance using multiple servers. Experimental results demonstrate that the proposed scheme significantly improves the performance of high priority eCom requests.     

Performance evaluation of dynamic probabilistic broadcasting for flooding in mobile ad hoc networks

In mobile ad hoc networks (MANETs), flooding is a required message dissemination technique for network-wide broadcast. The conventional blind flooding algorithm causes broadcast storm problem, a high number of unnecessary packet rebroadcasts thus resulting in high contention and packet collisions. This paper proposes a new probabilistic approach that dynamically fine-tunes the rebroadcasting probability of a node for routing request packets (RREQs) according to the number of neighbour nodes. We evaluate the performance of the proposed approach for the ad hoc on demand distance vector (AODV) routing protocol and compared against the blind flooding, fixed probabilistic and adjusted probabilistic flooding [L.M.M.M. Bani-Yassein, M. Ould-Khaoua et al., Performance analysis of adjusted probabilistic broadcasting in mobile ad hoc networks, International Journal of Wireless Information Networks 13(2) (2006) 127–140; M.B. Yassein, M.O. Khaoua et al., Improving route discovery in on-demand routing protocols using local topology information in MANETs, Proceedings of the ACM international workshop on Performance Monitoring, Measurement, and Evaluation of Heterogeneous Wireless and Wired Networks, Terromolinos, Spain, ACM Press, 2006, pp. 95–99.] approaches. The simulation results show that our proposed approach demonstrates better performance than blind flooding, fixed probabilistic and adjusted flooding approaches.     

Performance analysis of a threshold-based discrete-time queue using maximum entropy

The provision of guaranteed QoS for various Internet traffic types has become a challenging problem for researchers. New Internet applications, mostly multimedia-based, require differentiated treatments under certain QoS constraints. Due to a rapid increase in these new services, Internet routers are facing serious traffic congestion problems. This paper presents an approximate analytical performance model in a discrete-time queue, based on closed form expressions using queue threshold, to control the congestion caused by the bursty Internet traffic. The methodology of maximum entropy (ME) has been used to characterize closed form expressions for the state and blocking probabilities. A discrete-time GGeo/GGeo/1/{N₁, N₂} censored queue with finite capacity, N₂, external compound Bernoulli traffic process and generalised geometric transmission times under a first come first serve (FCFS) rule and arrival first (AF) buffer management policy has been used for the solution process. To satisfy the low delay along with high throughput, a threshold, N₁, has been incorporated to slow the arrival process from mean arrival rate λ₁ to λ₂ once the instantaneous queue length has been reached, otherwise the source operates normally. This creates an implicit feedback from the queue to the arrival process. The system can be potentially used as a model for congestion control based on the Random Early Detection (RED) mechanism. Typical numerical experiments have been included to show the credibility of ME solution against simulation for various performance measures and to demonstrate the performance evaluation of the proposed analytical model.