Swelling of pH‐sensitive chitosan–poly(vinyl alcohol) hydrogels

The swelling properties of different chitosan–poly(vinyl alcohol) (PVA) hydrogels were investigated as functions of the medium pH and salt concentration. The maximum swelling ability of the hydrogels was at a buffer pH of approximately 3, regardless of the PVA content in the hydrogels. The maximum mass of the swollen hydrogels was about 13 times that of their contracted counterparts. The cyclical swelling and contraction between pH 3 and pH 7 buffers and pH 3 and pH 3 buffers with salt confirmed the Donnan swelling mechanism of these hydrogels. The swelling mechanism was considered the transfer of water molecules driven by a concentration gradient. This was represented by a simplified mass‐balance model, which neglected the effect of the ionization reaction, for the initial swelling period. The effective mass‐transfer coefficient of water molecules during swelling, estimated with this model, gradually decreased with increasing PVA content in the hydrogels. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4665–4671, 2006     

Halogen-free acylation of toluene over FeSBA-1 molecular sieves

Three-dimensional cage type iron substituted mesoporous silica with different iron contents (FeSBA-1) was synthesized in a highly acidic media using cetyltriethylammonium bromide and tetraethylorthosilicate as a template and a silica source, respectively. Acylation of toluene with acetic anhydride (AA) was carried out over FeSBA-1 mesoporous catalysts with different n_Si/n_Fe ratios in the temperature range 80–180 °C for a time-on-stream of 1–6 h under liquid phase conditions. The important factors affecting the conversion and the selectivity of the reaction, such as the reaction temperature, feed ratio, catalyst weight and time-on-stream were studied and the results are discussed in detail. The reaction conditions were optimized and the n_AA/n_Toluene ratio of 2 and catalyst weight of 0.1 g (3.3 wt% of total reaction mixture) were maintained for all catalytic runs. It was found that the catalytic activity is strongly influenced by the amount of tetrahedral iron in the catalysts. Among the catalysts used in the present study, FeSBA-1(36) showed a high toluene conversion and selectivity to p-methylacetophenone (p-MAP) under the optimized reaction conditions. It was also found that the selectivity for p-MAP was always higher than m-MAP and o-MAP for all the catalysts and the activity of the catalysts changes in the following order: FeSBA-1(36) > FeSBA-1(90) > FeSBA-1(120).     

Effect of Ozone on Aspergillus niger Causing Black Rot Disease in Onion

The effect of ozone on Aspergillus niger causing black rot disease in onion was studied in culture. Ozone induced the spore germination in all treatments and few spores showed rapid swelling, resulting in the production of 2-3 germ tubes per spore compared to control. Although all the ozone treated spores germinated, all of them did not produce uniform colony morphology. Some colonies which developed from ozone treated spores failed to produce spores and such colonies appeared as grey patches of mycelia without spores amidst surrounding black sporulating colonies. Further work is in progress to study the mechanism involved in formation of sterile mycelia by ozone.     

Disallowed Ramachandran conformations of amino acid residues in protein structures

An analysis of the nature and distribution of disallowed Ramachandran conformations of amino acid residues observed in high resolution protein crystal structures has been carried out. A data set consisting of 110 high resolution, non-homologous, protein crystal structures from the Brookhaven Protein Data Bank was examined. The data set consisted of a total of 18,708 non-Gly residues, which were characterized on the basis of their backbone dihedral angles (phi, psi). Residues falling outside the defined "broad allowed limits" on the Ramachandran map were chosen and the reported B-factor value of the alpha-carbon atom was used to further select well defined disallowed conformations. The conformations of the selected 66 disallowed residues clustered in distinct regions of the Ramachandran map indicating that specific phi, psi angle distortions are preferred under compulsions imposed by local constraints. The distribution of various amino acid residues in the disallowed residue data set showed a predominance of small polar/charged residues, with bulky hydrophobic residues being infrequent. As a further check, for all the 66 cases non-hydrogen van der Waals short contacts in the protein structures were evaluated and compared with the ideal "Ala-dipeptide" constructed using disallowed dihedral angle (phi, psi) values. The analysis reveals that short contacts are eliminated in most cases by local distortions of bond angles. An analysis of the conformation of the identified disallowed residues in related protein structures reveals instances of conservation of unusual stereochemistry.     

An investigation of the electrical transport properties of graphene-oxide thin films

The electrical transport properties of graphene-oxide (GO) thin films were investigated. The GO was synthesized by a modified Hummers method and was characterized by X-ray diffraction and UV-visible spectroscopy. The thin film of GO was made on a Si/SiO₂ substrate by drop-casting. The surface morphology of the GO film was analyzed by using scanning electron microscopy and atomic force microscopy techniques. Temperature dependent resistance and current-voltage measurements were studied using four-terminal method at various temperatures (120, 150, 175, 200, 250 and 300 K) and their charge transport followed the 3D variable range hopping mechanism which was well supported by Raman spectra analysis. The presence of various functional groups in GO were identified by using high resolution X-ray photo electron (XPS) and Fourier transform infra red (FT-IR) spectroscopic techniques. Graphene-oxide thin film field effect transistor devices show p-type semiconducting behavior with a hole mobility of 0.25 cm² V⁻¹ s⁻¹ and 0.59 cm² V⁻¹ s⁻¹ when measured in air and vacuum respectively.     

Synthesis,structural and optical properties of Er doped,Li doped and Er + Li co-doped ZnO nanocrystallites by solution-combustion method

Pure zinc oxide (ZnO) and 2 mol% of Er, 1 mol% of Li individually doped and Er + Li co-doped ZnO nanopowders were synthesized by auto-combustion method. Crystal structure and grain size were characterized by X-ray diffractometer and found that all synthesized samples have hexagonal wurtzite crystal structure. Scanning electron microscope (SEM) and Transmission electron microscope (TEM) studies were used to determine the morphology and size of the nanocrystallites. A UV–VIS measurement shows four absorbance peaks in the visible regions and the band gap is slowly blue shifted after annealing at 800 °C. The presence of Er, Li and the hexagonal wurtzite structure was confirmed by FT-IR studies. FT-Raman spectroscopy has been employed to study the crystalline quality and structural disorders.     

Performance of gas chlorination in decolourization of textile dyeing wastewater: a pilot study

This study presents performance of gas chlorination in decolourization/degradation of textile dyeing wastewater, optimisation of operating parameters and process kinetics of gas chlorination since it eliminates the generation of hazardous sludge and economical treatment method. The pH, contact time and chlorine dosage were found optimised at 9, 30 min and 300 ppm, respectively. Colour (m^?1) of raw effluent was found in the range of 17–85, 14–52 and 15–24 and after the treatment, it was 3–7, 2–4 and 1–3 complying with the International colour standards at 436, 525 and 620 nm wavelengths, respectively. The percentage of colour removal and COD degradation were in the range of 89–95 and 28–45, respectively. Rate of reaction on colour removal and COD degradation were behaved in first order with kinetic rate constant ranged from 0.274 to 0.373 (min^?1) and 0.046 to 0.103 (min^?1), respectively. Performance of colour removal was achieved better than COD degradation.     

Hyperbranched poly(cyanurateamine): A new corrosion inhibitor for mild steel in hydrochloric acid medium

Hyperbranched poly(cyanurateamine) (POCYAM) was tested as a novel corrosion inhibitor for mild steel in 0.5–3 M HCl using chemical and electrochemical techniques at 25–70 °C. The results show that this compound has good corrosion inhibiting properties for mild steel in HCl at very low concentrations. Corrosion inhibition efficiency rises with POCYAM concentration. The adsorption of the POCYAM onto the mild steel surface obeys Langmuir adsorption isotherm model. The inhibition mechanism was further corroborated by the values of thermodynamic parameters obtained from the experimental data.     

Retraction Note to: A novel Gini index decision tree data mining method with neural network classifiers for prediction of heart disease

Design Automation for Embedded Systems -