Methods of rotating stall and surge detection in centrifugal compressors

Systems for prevention of surging of centrifugal compressors and methods of rotating stall detection and early surge diagnosis using statistical processing of sensor signals of various parameters, i.e., the method of calculation of the correlation function of the signal and the method of calculation of signal dispersion, are discussed. The results of routine tests of air and high-speed air centrifugal compressors and their detachable flow parts are adduced. __________ Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 6, pp. 30–33, June, 2006.     

Increasing productivity in sculpture surface machining via off-line piecewise variable feedrate scheduling based on the force system model

Sculpture surface machining is a critical process commonly used in various industries such as the automobile, aerospace, die/mold industries. Since there is a lack of scientific tools in practical process planning stages, feedrates for CNC machining are selected based on the trial errors and previous experiences. In the selections of the process parameters, production-planning engineers are conservative in order to avoid undesirable results such as chipping, cutter breakage or over-cut due to excessive cutter deflection. Currently, commonly used CAD/CAM programs use only the geometric and volumetric analysis, but not the physics of the processes, and rely on experience based cutting tool database and users’ inputs for selection of the process parameters such as feed and speed. Usually, the feeds and cutting speeds are set individual constant values all along the roughing, semi-finishing, and finishing processes. Being too conservative and setting feedrate constant all along the tool path in machining of sculpture surfaces can be quite costly for the manufacturers. However, a force model based on the physics of the cutting process will be greatly beneficial for varying the feedrate piecewise along the tool path.The model presented here is the first stage in order to integrate the physics of the ball-end milling process into the selection of the feeds during the sculpture surface machining. Therefore, in this paper, an enhanced mathematical model is presented for the prediction of cutting force system in ball end milling of sculpture surfaces. This physical force model is used for selecting varying and ‘appropriate’ feed values along the tool path in order to decrease the cycle time in sculpture surface machining. The model is tested under various machining conditions, and some of the results are also presented in the paper.     

Experimental study of a micro-scale sloped solar chimney power plant

Journal of Mechanical Science and Technology - Solar chimney power plants (SCPP) are structures that have the potential to generate a significant amount of electrical energy without harming the...     

A study of the effect of oxygen on the intensity of erbium photoluminescence in amorphous SiO<Subscript>x</Subscript>:(H,Er) films formed by DC magnetron sputtering

The effect of oxygen on the intensity of erbium photoluminescence at λ=1.54 μm in amorphous a-SiO_x:H(Er) films formed by dc magnetron sputtering was studied. The oxygen content in the gaseous phase ranged from 0.1 to 12 mol %, with other parameters of deposition remaining constant. Analysis of an a-Si:(H, Er, O) system showed that the range of homogeneity of amorphous a-SiO_x:H(Er) is retrograde (T=const). The range of homogeneity can be conventionally divided into two portions, each of which should contain either of two differently charged [Er-O] ⁿ⁻ and [Er-O-Si-O] ^m− clusters (m>n). This inference is confirmed experimentally: in the range of oxygen concentrations amounting to 5.5–8 mol % in the plasma, unusual associative processes take place probably directly above the growing film surface; these processes are caused by the appearance of [Er-O-Si-O] ^m− clusters in the plasma and at the surface. It is these processes that account for the intensification of erbium photoluminescence as the oxygen content increases above 5.5 mol %. __________ Translated from Fizika i Tekhnika Poluprovodnikov, Vol. 37, No. 7, 2003, pp. 853–859. Original Russian Text Copyright ? 2003 by Undalov, Terukov, Gusev, Kudoyarova.     

Optical and electrical properties of polyamide acid and metal-polymer complex based on terbium

The basic optical and electrical properties of polyamide acid and its complex with Tb⁺² have been studied. The occurrence of room-temperature photoluminescence (PL) with an emission peak at 520 nm is established. The activation energy of conductivity at temperatures above 350 K is 2.1 eV. Polyamide acid is comparable in PL intensity with an electroluminescent polymer, poly(p-phenylvinylene).     

Influence of the substrate temperature and annealing on the 1.54-µm erbium photoluminescence of a-Si:H films obtained using a glow discharge

Effective Er photoluminescence is observed at room temperature in a-Si:H films doped with Er atoms through a gas phase using powdered Er(TMND)₃ as a source of Er ions. It is shown that the conditions for deposition of the films and their subsequent annealing influence the photoluminescence intensity and its temperature dependence. The observed behavior is attributed to restructuring of the amorphous silicon matrix within an Auger excitation mechanism involving defects. Fiz. Tekh. Poluprovodn. 33, 208–210 (February 1999)     

Determining the mechanical properties of epoxy resin (DGEBA) composites by ultrasonic velocity measurement

In this study, the composites of diglycidyl ether of bisphenol A (DGEBA) epoxy resin that have been formed by mixing epoxy resin with allyl glycidyl ether (AGE) and 2,3‐epoxypropyl methacrylate [glycidyl methacrylate (GMA)] were prepared in weight % ratios of 90 : 10, 80 : 20, and 70 : 30. A computer controlled analyzer with 35 MHz and a digital oscilloscope with 60 MHz were used for measuring the velocities of ultrasonic wave. The measurement of ultrasonic velocity carried out by pulse echo method at frequencies of 2.25 and 3.5 MHz at room temperature. The values of acoustic impedance (Z), Poisson ratio (μ), and coefficients of elasticity (L, G, K, E) of composites were calculated by values of densities and velocities that obtained. Thus, the effect of modificating epoxy resin (DGEBA) by AGE and GMA on mechanical properties of DGEBA was investigated using the ultrasonic method. Atomic force microscopy has been used for determining the microstructure of composites. By the results obtained from the investigation, it have been established that the longitudinal and shear ultrasonic wave velocities, and the values of all the elasticity constants of DGEBA were increased by modification with AGE and GMA. Also the most suitable combination ratio for the compound of DGEBA : AGE and DGEBA : GMA has been found as 80 : 20. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013