Diazepam-insensitive GABAA receptors on postnatal spiral ganglion neurones in culture

Using dissociated spiral ganglion cell cultures obtained from 3-day-old rat cochlea, we investigated the response of auditory neurones to gamma-aminobutyric acid (GABA) using patch-clamp techniques. In our recording conditions, GABA elicited inward currents in > 95% of the neurones which reversed around 0 mV. Similar inward currents were measured using isoguvacin, a specific agonist of GABAA receptors. GABA-gated currents were reversibly inhibited by the channel blocker picrotoxin and the GABA competitive antagonist bicuculline. These functional GABAA receptors are characterized by an insensitivity to benzodiazepines and a relatively high sensitivity to beta-carbolines and barbiturates. These results show that the GABAA receptor pharmacological properties of spiral ganglion neurones are close to those of cerebellar granule cells.     

Synergy of Magnetite Intercalated Bentonite for Enhanced Adsorption of Congo Red Dye

Recently, magnetic separation of adsorbent materials has attracted much attention for abatement of water pollutants. Due to the strong magnetic property and environmental beneficial behavior Fe3O4 NPs were used to modify local bentonite clay. The prepared magnetite intercalated Bentonite clay composite (Fe3O4-AC) structure and magnetic property were confirmed by powder X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), scanning electron microscope (SEM) and vibrating sample magnetometer (VSM). The prepared Fe3O4-AC composite has shown a superior adsorption efficiency to Congo red (CR) dye over acid activated bentonite clay (AC). The enhanced adsorption of the Fe3O4 NPs intercalated in the layer of bentonite could be ascribed to the enhanced surface area and the prevention of the activated clay agglomeration. The optimum removal efficiency was analyzed using Response Surface Methodology (RSM) based Box-Benhken Design (BBD). The optimum conditions for maximum adsorption % removal were found to 94.9% at 105 min, 0.6 g Fe3O4-AC composite, 10 mg. L−1, and pH =4. The adsorption isotherms and Kinetics process were indicated that the experimental data are well fitted to Langmuir and pseudo-second-order models.     

Enhancing the Selectivity and Transparency of the Electron Contact in Silicon Heterojunction Solar Cells by Phosphorus Catalytic Doping

An intrinsic hydrogenated amorphous silicon (a-Si:H(i)) film and a doped silicon film are usually combined in the heterojunction contacts of silicon heterojunction (SHJ) solar cells. In this work, a post-doping process called catalytic doping (Cat-doping) on a-Si:H(i) is performed on the electron selective side of SHJ solar cells, which enables a device architecture that eliminates the additional deposition of the doped silicon layer. Thus, a single phosphorus Cat-doping layer combines the functions of two other layers by enabling excellent interface passivation and high carrier selectivity. The overall thinner layer on the window side results in higher spectral response at short wavelengths, leading to an improved short-circuit current density of 40.31 mA cm⁻² and an efficiency of 23.65% (certified). The cell efficiency is currently limited by sputter damage from the subsequent transparent conductive oxide fabrication and low carrier activation in the a-Si:H(i) with Cat-doping. Numerical device simulations show that the a-Si:H(i) with Cat-doping can provide sufficient field effect passivation even at lower active carrier concentrations compared to the as-deposited doped layer, due to the lower defect density.     

Review: Investigation of Partially Pre-mixed Charge Ignitions (PPCI) Engine Mode

This paper embraces the key points of unpolluted internally combusted engine emissions. Core objective is focused on the recent effort to improve compression ignition(CI) and spark ignition(SI) engine to have fuel-efficient and minimized pollutant emissions. There are many advanced internal combustion engines to overcome the challenges of conventional compression ignition engines of the high level of particulate matter(PM) and oxides of nitrogen emission. One of the latest options on which many ...     

Food insecurity,school absenteeism and educational attainment of adolescents in Jimma Zone Southwest Ethiopia: a longitudinal study

Background  

Food insecurity not only affects physical growth and health of children but also their intellectual development, school attendance and academic performance. However, most evidences are based on studies in high income countries. Although food insecurity is common in Ethiopia, to what extent it affects school attendance and educational attainment of adolescents is not explored. We hypothesized that food insecure adolescents would be more likely to be absent from school and have lower grades attained after 1 year compared to their food secure peers.     

Bioactive Peptides Derived from Seaweed Protein and Their Health Benefits: Antihypertensive,Antioxidant, and Antidiabetic Properties

Cardiovascular diseases and diabetes are the biggest causes of death globally. Therefore, prevention of these diseases is a focus of pharmaceuticals and functional food manufacturers. This review summarizes recent research trends and scientific knowledge in seaweed protein‐derived peptides with particular emphasis on production, isolation and potential health impacts in prevention of hypertension, diabetes and oxidative stress. The current status and future prospects of bioactive peptides are also discussed. Bioactive peptides have strong potential for use in therapeutic drug and functional food formulation in health management strategy, especially cardiovascular disease and diabetes. Seaweeds can be used as sustainable protein sources in the production of these peptide‐based drugs and functional foods for preventing such diseases. Many studies have reported that peptides showing angiotensin converting enzyme inhibition, antihypertensive, antioxidative and antidiabetics activities, have been successfully isolated from seaweed. However, further research is needed in large‐scale production of these peptides, efficient isolation methods, interactions with functional foods and other pharmaceuticals, and their ease to digestion in in vivo studies and safety to validate the health benefits of these peptides.     

Effects of a liquid metal co-filler on the properties of epoxy/binary filler composites

Liquid metals (LMs) with high fluidity and high thermal conductivity (TC) are receiving considerable attention in the research on thermal management polymer composites as alternatives to conventional rigid solid fillers or as co-fillers to overcome the trade-off between TC and composite processability at high filler loads. While most previous studies have investigated the effects of LM fillers in soft elastomeric matrices, their effects on the composite properties with rigid matrices, such as epoxy-based polymers, have not been discussed extensively. Herein, we investigated the effects of LM eutectic Ga-In (EGaIn) as a co-filler on the properties of rigid epoxy-based composites with a binary filler (Al₂O₃/EGaIn) system. The increase in the volume fraction of LM fillers significantly improves the processability of uncured precursor composites but markedly decreases the mechanical strength of the cured composites at their high loads—the latter effects have rarely been examined in previous studies. However, with adequate LM loads, the composites exhibited superior mechanical properties compared with the all-solid-filler system, withstanding a surprisingly high compressive load (~100 kN) under which the all-solid-filler system fractured. Furthermore, the epoxy/binary filler composites exhibited reasonably high TC values (~1 W/mK) comparable to that of commercial epoxy molding compounds, suggesting their potential applicability for electronic packaging.     

Population dynamics and exploitation patterns of Oreochromis niloticus in Lake Tana,northwest Ethiopia

Oreochromis niloticus is the dominant commercial fish in the Lake Tana region. However, its fishery is progressively declining over time. Little or no updated information exists on the population dynamics and exploitation patterns of the species, which is crucial to guide its sustainable management. Accordingly, the purpose of the present study was to generate essential biological parameters on the growth, mortality and stock status of O. niloticus, using length‐frequency data collected monthly from the commercial fish catches of 1 year (2014–2015). The total mortality coefficient (Z) was derived from the length‐converted catch curve. Biological reference points were predicted from relative yield‐ and biomass‐per‐recruit analyses. The estimated values of the von Bertalanffy growth parameters were L_∞ = 44.1 cm, K = 0.44/year, and t₀ = ?0.34/year, and the growth performance index (Φ′) was 2.93. The total mortality (Z), natural (M) and fishing mortality (F) rates were 2.37, 0.98 and 1.39 per year, respectively. The current fishery exploitation rate of 0.59 exceeds the estimated biological reference points of E_max (0.52), confirming the stock of O. niloticus in the lake is being overexploited above optimum levels. Size indicators of the catches further illustrate 31% of the landed fish are harvested before reaching sexual maturity, with mega‐spawners comprising only 15%. This indicates the stock is suffering from both growth and recruitment overfishing. The logistic selection model indicated 50% of the fish vulnerable to capture was at 18.14 cm TL. The fish exhibited a year‐round recruitment pattern, with a major peak during May and June. Sustainably managing the fishery, therefore, requires increasing the fish size at first capture (L_c) towards L_opt.     

Ethanol-Assisted Aqueous Enzymatic Extraction of Peony Seed Oil

An ethanol-assisted aqueous enzymatic extraction was performed for peony seed oil (content of 30%). This method included cooking pretreatment, pectinase hydrolysis, and aqueous ethanol extraction, and the corresponding variables in each step were investigated. The changes in viscosity and dextrose equivalent values of the reaction medium as a function of changing enzymatic hydrolysis time were compared to the oil yield. The microstructures of peony seeds were analyzed using confocal laser scanning microscopy to understand the process of oil release as a result of cooking and grinding. The highest oil yield of 92.06% was obtained when peony seeds were cooked in deionized water with a solid–liquid ratio of 1:5 (w/v) at 110°C for 1 hour, ground to 31.29 μm particle size, treated with 0.15% (w/w) pectinase (temperature 50°C, pH 4.5, time 1 hour), and then extracted with 30% (v/v) aqueous ethanol (temperature 60°C, pH 9.0, time 1 hour). After processing with pectinase followed by ethanol extraction, the residual oil content in water and sediment phase decreased to 5% and 3%, respectively. The quality of the oil obtained by ethanol-assisted aqueous enzymatic extraction was good, complying with the Chinese standard.