The effect of rice bran on physicochemical,textural and glycaemic properties of ready-to-eat extruded corn snacks

In this work, corn extruded snack products were enriched with rice bran (RB) at 10% and 15%. A co-rotating twin-screw extruder was used with a feed moisture content of 16 g 100 g⁻¹, a screw speed of 240 r.p.m. and four heating sections of the barrel (100, 140, 150 and 150 °C). The impact of RB inclusion on nutritional profile, starch digestion, physicochemical and textural properties of snack products was evaluated. RB-enriched extrudates showed a lower specific volume and hardness and higher crispness than control. RB at 15% gave a water-holding capacity lower than control. Rheology of extrudate dispersions indicated an increase in elastic interactions and solid-like behaviour with RB supplementation. Differences in rheological properties resulted in attenuation of predictive glycaemic response for RB-enriched snacks.     

Strain‐rate‐dependent mechanical properties of polypropylene separator for lithium‐ion batteries

The mechanical integrity of battery separators is critical for battery safety and durability. A comprehensive study of strain‐rate‐dependent tensile and puncture properties of a polypropylene lithium‐ion battery separator is presented here with a new model. Due to anisotropy of the polymeric membrane, tensile testing was conducted for different directions. Results showed that tensile strength and elastic modulus were increased 1000% and 500%, respectively, for different directions. It was also demonstrated that tensile strength changed 10 to 25% with strain rate (1.67 × 10^?4 to 1.67 × 10^?1 s^?1) for different directions. An equation was obtained for the first time for flow stress versus strain rate at varied tensile directions with respect to machine direction. Moreover, puncture testing was performed and it was shown that puncture strength was increased 140% with increasing strain rate from 0.25 to 250 mm min^?1. Two failure modes were also observed in puncture samples. Finally, Eyring's model was used to calculate activation enthalpy of the porous polypropylene separator. © 2020 Society of Chemical Industry     

Kernel Spectral Matched Filter for Hyperspectral Imagery

In this paper a kernel-based nonlinear spectral matched filter is introduced for target detection in hyperspectral imagery, which is implemented by using the ideas in kernel-based learning theory. A spectral matched filter is defined in a feature space of high dimensionality, which is implicitly generated by a nonlinear mapping associated with a kernel function. A kernel version of the matched filter is derived by expressing the spectral matched filter in terms of the vector dot products form and replacing each dot product with a kernel function using the so called kernel trick property of the Mercer kernels. The proposed kernel spectral matched filter is equivalent to a nonlinear matched filter in the original input space, which is capable of generating nonlinear decision boundaries. The kernel version of the linear spectral matched filter is implemented and simulation results on hyperspectral imagery show that the kernel spectral matched filter outperforms the conventional linear matched filter.     

Cit-CSP及其应用

介绍了Cit-CSP--Cit/E-commerce信息安全保障平台子系统，并阐述了它所提供的消息摘要、块加密、加密(公钥)、签名和MAC等功能和服务。     

Residual vector quantization using a multilayer competitive neuralnetwork

This paper presents a new technique for designing a jointly optimized residual vector quantizer (RVQ). In conventional stage-by-stage design procedure, each stage codebook is optimized for that particular stage distortion and does not consider the distortion from the subsequent stages. However, the overall performance can be improved if each stage codebook is optimized by minimizing the distortion from the subsequent stage quantizers as well as the distortion from the previous stage quantizers. This can only be achieved when stage codebooks are jointly designed for each other. In this paper, the proposed codebook design procedure is based on a multilayer competitive neural network where each layer of this network represents one stage of the RVQ. The weight connecting these layers form the corresponding stage codebooks of the RVQ. The joint design problem of the RVQ's codebooks (weights of the multilayer competitive neural network) is formulated as a nonlinearly constrained optimization task which is based on a Lagrangian error function. This Lagrangian error function includes all the constraints that are imposed by the joint optimization of the codebooks. The proposed procedure seeks a locally optimal solution by iteratively solving the equations for this Lagrangian error function. Simulation results show an improvement in the performance of an RVQ when designed using the proposed joint optimization technique as compared to the stage-by-stage design, where both generalized Lloyd algorithm (GLA) and the Kohonen learning algorithm (KLA) were used to design each stage codebook independently, as well as the conventional joint-optimization technique     

Support vector regression methodology for prediction of input displacement of adaptive compliant robotic gripper

The prerequisite for new versatile grippers is the capability to locate and perceive protests in their surroundings. It is realized that automated controllers are profoundly nonlinear frameworks, and a faultless numerical model is hard to get, in this way making it troublesome to control utilizing tried and true procedure. Here, a design of an adaptive compliant gripper is presented. This design of the gripper has embedded sensors as part of its structure. The use of embedded sensors in a robot gripper gives the control system the ability to control input displacement of the gripper and to recognize specific shapes of the grasping objects. Since the conventional control strategy is a very challenging task, soft computing based controllers are considered as potential candidates for such an application. In this study, the polynomial and radial basis function (RBF) are applied as the kernel function of Support Vector Regression (SVR) to estimate and predict optimal inputs displacement of the gripper according to experimental tests and shapes of grasping objects. Instead of minimizing the observed training error, SVR _poly and SVR _rbf attempt to minimize the generalization error bound so as to achieve generalized performance. The experimental results show that an improvement in predictive accuracy and capability of generalization can be achieved by the SVR approach compared to other soft computing methodology.     

Nonflat surface level pyramid: a high connectivity multidimensional interconnection network

Parallel machines are extensively used to increase computational speed in solving different scientific problems. Various topologies with different properties have been proposed so far and each one is suitable for specific applications. Pyramid interconnection networks have potentially powerful architecture for many applications such as image processing, visualization, and data mining. The major advantage of pyramids which is important for image processing systems is hierarchical abstracting and transferring the data toward the apex node, just like the human being vision system, which reach to an object from an image. There are rapidly growing applications in which the multidimensional datasets should be processed simultaneously. For such a system, we need a symmetric and expandable interconnection network to process data from different directions and forward them toward the apex. In this paper, a new type of pyramid interconnection network called Non-Flat Surface Level (NFSL) pyramid is proposed. NFSL pyramid interconnection networks constructed by L-level A-lateral-base pyramids that are named basic-pyramids. So, the apex node is surrounded by the level-one surfaces of NFSL that are the first nearest level of nodes to apex in the basic pyramids. Two topologies which are called NFSL-T and NFSL-Q originated from Trilateral-base and Quadrilateral-base basic-pyramids are studied to exemplify the proposed structure. To evaluate the proposed architecture, the most important properties of the networks are determined and compared with those of the standard pyramid networks and its variants.     

Natural killer or T-lymphocyte cells: Which is the best immune therapeutic agent for cancer? An optimal control approach

Therapeutic vaccines are being developed as a promising new approach to treatment for cancer patients. There are still many unanswered questions about which kind of therapeutic vaccines are the best for the cancer treatments? In this paper we consider a mathematical model, in the form of a system of ordinary differential equations (ODE), this system is an example from a class of mathematical models for immunotherapy of the tumor that were derived from a biologically validated model by Lisette G. de Pillis. The problem how to schedule a variable amount of which vaccines to achieve a maximum reduction in the primary cancer volume is consider as an optimal control problem and it is shown that optimal control is quadratic with 0 denoting a trajectory corresponding to no treatment and 1 a trajectory with treatment at maximum dose along that all therapeutics are being exhausted. The ODE system dynamics characterized by locating equilibrium points and stability properties are determined by using appropriate Lyapunov functions. Especially we attend a parametric sensitivity analysis, which indicates the dependency of the optimal solution with respect to disturbances in model parameters.     

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.