Drying Kinetics of a Porous Spherical Particle and the Inversion Temperature

A model is presented for drying of a single porous particle with superheated steam and humid air. Experimental data for spherical porous ceramic particle reported in the literature were used for the validation of the model. An inversion temperature at which the evaporation rates within superheated steam and humid air are equal was predicted. The effect of thermophysical properties of the particle (permeability 10^-14 - 10^-17 m², diameter 3 × 10^-3 - 10 × 10^-3 m) and operating variables (gas mass flux 0.26 - 0.78 kg m^-2 s^-1, drying agent temperature 120-200°C) is tested. The inversion temperature is shown to be affected by the thermophysical properties of the porous particle and of the drying agent.     

A new fast motion estimation algorithm using fast mode decision for high-efficiency video coding standard

High-efficiency video coding is the latest standardization effort of the International Organization for Standardization and the International Telecommunication Union. This new standard adopts an exhaustive algorithm of decision based on a recursive quad-tree structured coding unit, prediction unit, and transform unit. Consequently, an important coding efficiency may be achieved. However, a significant computational complexity is resulted. To speed up the encoding process, efficient algorithms based on fast mode decision and optimized motion estimation were adopted in this paper. The aim was to reduce the complexity of the motion estimation algorithm by modifying its search pattern. Then, it was combined with a new fast mode decision algorithm to further improve the coding efficiency. Experimental results show a significant speedup in terms of encoding time and bit-rate saving with tolerable quality degradation. In fact, the proposed algorithm permits a main reduction that can reach up to 75 % in encoding time. This improvement is accompanied with an average PSNR loss of 0.12 dB and a decrease by 0.5 % in terms of bit-rate.     

A new scalable multicast routing algorithm for interactive real-time applications

Quality of service (QoS) provisioning generally assumes more than one QoS measure that implies that QoS routing can be categorized as an instance of routing subject to multiple constraints: delay jitter, bandwidth, cost, etc. We study the problem of constructing multicast trees to meet the QoS requirements of real-time interactive applications where it is necessary to provide bounded delays and bounded delay variation among the source and all destinations while keeping overall cost of the multicast tree low. The main contribution of our work is a new strategy for constructing multiconstrained multicast trees. We first derive mathematically a new delay-variation estimation scheme and prove its efficiency. Thereafter, we propose a simple and competitive (in terms of running time) heuristic algorithm, for delay and delay variation constrained routing problem based on the proposed delay-variation estimation scheme and using the Extended Prim-Dijkstra tradeoffs’ algorithm. Our contribution also extends previous works in providing some properties and analyses of delay bounded paths satisfying delay variation constraints. Extensive simulation results show that our algorithm outperforms DVDMR in terms of multicast delay variation with the same time complexity as DVDMR.     

Understanding design patterns — what is the problem?

Design patterns codify proven solutions to recurring design problems. Their proper use within a development context requires that: (i) we understand them; (ii) we ascertain their applicability or relevance to the design problem at hand; and (iii) we apply them faithfully to the problem at hand. We argue that an explicit representation of the design problem solved by a design pattern is key to supporting the three tasks in an integrated fashion. We propose a model‐driven representation of design patterns consisting of triples < MP, MS, T > where MP is a model of the problem solved by the pattern, MS is a model of the solution proposed by the pattern, and T is a model transformation of an instance of the problem into an instance of the solution. Given an object‐oriented design model, we look for model fragments that match MP (call them instances of MP), and when one is found, we apply the transformation T yielding an instance of MS. Easier said than done. Experimentation with an Eclipse Modeling Framework‐based implementation of our approach applied to a number of open‐source software application's raised fundamental questions about: (i) the nature of design patterns in general, and the ones that lend themselves to our approach, and (ii) our understanding and codification of seemingly simple design patterns. In this paper, we present the principles behind our approach, report on the results of applying the approach to the Gang of Four (GoF) design patterns, and discuss the representability of design problems solved by these patterns. Copyright © 2011 John Wiley & Sons, Ltd.     

Production of hot air with quasi uniform temperature using concentrated solar radiation

The design of a hot air solar generator for different uses has been simulated while investigating the flow induced by a hot disc placed at the entrance of the open ended vertical cylinder. Ambient air (Pr = 0.7) enters the bottom of the cylinder with constant velocity and temperature, and flows up through the cylinder as a result of natural convection. The cylindrical wall is heated by thermal radiation emitted by the disc. The pressure drop due to acceleration of the flow to the cylinder-inlet causes the appearance of thermosyphon effect around the thermal plume. At the top part of the cylinder, the flow exploration shows the full development of the turbulence and the uniformity of thermal and hydrodynamic fields. The study of the thermal spectral density indicates that the turbulent structures seem to be sufficiently small not to be sensitive to viscosity, but large enough to be sensitive to Archimedes effects.     

Simulation of the control of a salt gradient solar pond in the south of Tunisia

We are interested in the modeling and control of a salt gradient solar pond (SGSP) in the south of Tunisia. We developed a model of a closed cycle salt gradient solar pond (CCSGSP) that ensures successful year round operation. This model was used to study the response of the solar pond (SP) to various control techniques. It takes into account heat and salt diffusion within the pond and simulates the transient behavior of a SGSP. Furthermore, we investigated the dynamic process, which involves internal gradient stability, boundary behavior between the gradient zone and the convective zones. We thus incorporated the double diffusive processes into the SP model by using the one dimensional stability criterion produced by linear theory. The governing differential equations are solved numerically by using a control-volume scheme.The results show that successful operation of a SP requires three things: the maintenance of the storage zone temperature through heat extraction and brine injection, the use of surface washing to control the deepening of the upper mixed layer and a well designed initial salt stratification to prevent the formation of instability within the gradient. Using linear salinity profile as an initial condition, three round year simulations were run using average meteorological data with the result that adequate stability (Rρ2 throughout the gradient and Rρ10 at the interfaces) was maintained. Numerical results show also that 10–30% efficiency could have been reached if heat extraction is performed routinely especially when one considers that the storage temperature is within 40–80 °C. The model is validated against data taken from the operation of the UTEP SP. Close correlation between computed and measured data was obtained.     

USAD: undetectable steganographic approach in DCT domain

In this work, we propose a new adaptive chaotic steganographic method based on the Discrete Cosine Transform (DCT) and a reversible mapping function. The mapping function is used to map the secret bits into their corresponding symbols. This mapping technique has to preserve the same dynamics, properties and distribution of the original DCT coefficients. The novelty of our approach is based on the adaptive selection phase of embedding spots. This selection is established through a blindness condition which is applied over each image of the database. The proposed embedding scheme within the middle DCT coefficients shows lower probability of detection and higher flexibility in extraction. We evaluate the detection of our method using the Ensemble Classifiers and a set of frequency and spatial domain feature extractors such as the Spatial domain Rich Model (SRM) features, Chen et al.'s 486-dimensional both inter- and intra-block Markov-based features and Liu's 216-dimensional adaptive steganography-based features.     

Heat transfer in a rotating furnace of asolarsand-boiler at a 1000 kW thermal concentrationsystem

In this study, a theoretical and experimental analysis are presented in the aim to determine the reflected radiance distribution law (brightness) for paraboloid concentrator solar system. Among the characteristic parameters of this law, we consider the variation of the direct radiance of the solar disk, the variation of the apparent sun diameter, the atmospheric conditions and all the errors types or failures of the optic system. Here, we analyse the influence of these parameters on the energy power distribution in focal space. The experimental results, obtained in a 1000 kW thermal concentration system at Odeillo, are compared to the theoretical results in order to determine the optimal values of the characteristic parameters corresponding to such installation. In the aim to exhibit the utility of this analysis, the irradiance distribution in focal plane is presented for different positions of receiver surface and for different intensities of concentrated flux.     

Effect of preparation methods on the catalyst performance of Co/MgLa mixed oxide catalyst for COx-free hydrogen production by ammonia decomposition

This work deals with the effect of catalyst preparation method of the mixed Co, Mg and La oxide catalysts on their structure and catalytic properties for ammonia decomposition. Two methods are used for catalysts preparations impregnation and co-precipitation (in air and in pure O₂ atmosphere), The Mg/La = 2 molar ratio and 5 wt% of cobalt content was maintained same in all catalysts. The catalyst performance was evaluated in the temperature range 300–550 °C at atmospheric pressure. The prepared catalysts were characterized by BET, XRD, TPR, XPS, CO₂-TPD and SEM techniques. No pronounced differences were observed in BET among the catalysts. It was found that the 5CML-OXY (5 wt%Co over MgLa catalyst prepared by co-precipitation method in oxygen atmosphere) has superior activity among the other catalysts. This could be attributed to availability of easily reducible cobalt species determined by TPR studies and enhanced interaction between Mg and La determined by SEM and XPS. The moderate basic site density determined by CO₂-TPD results was also increased in 5CML–OXY catalysts compared with other catalysts. These consequences are might be one of the reasons for enhanced activity of 5CML–OXY catalyst compared to other catalysts. Hence catalyst preparation by co-precipitation in oxygen atmosphere is the best method which might be one of the parameters that influenced on catalytic properties of the cobalt on MgOLa₂O₃ system, for ammonia decomposition.