Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation. 相似文献
We present a comprehensive review of the evolutionary design of neural network architectures. This work is motivated by the fact that the success of an Artificial Neural Network (ANN) highly depends on its architecture and among many approaches Evolutionary Computation, which is a set of global-search methods inspired by biological evolution has been proved to be an efficient approach for optimizing neural network structures. Initial attempts for automating architecture design by applying evolutionary approaches start in the late 1980s and have attracted significant interest until today. In this context, we examined the historical progress and analyzed all relevant scientific papers with a special emphasis on how evolutionary computation techniques were adopted and various encoding strategies proposed. We summarized key aspects of methodology, discussed common challenges, and investigated the works in chronological order by dividing the entire timeframe into three periods. The first period covers early works focusing on the optimization of simple ANN architectures with a variety of solutions proposed on chromosome representation. In the second period, the rise of more powerful methods and hybrid approaches were surveyed. In parallel with the recent advances, the last period covers the Deep Learning Era, in which research direction is shifted towards configuring advanced models of deep neural networks. Finally, we propose open problems for future research in the field of neural architecture search and provide insights for fully automated machine learning. Our aim is to provide a complete reference of works in this subject and guide researchers towards promising directions.
The achievement of governmental transformation through the use of electronically delivered services is a worthy goal that requires significant planning and research to achieve. In order to reach transformational paradigm shifts in governmental operation, it will first be necessary to understand and optimize present governmental e-Service provisions. Of these, the revenue function of taxation is paramount. This paper describes factors related to the use and acceptance by accounting professionals of information technology intended to facilitate electronic tax filing systems. Though tested in the context of governmental tax management systems in Turkey, our findings on the use and acceptance of e-Tax systems are relevant and applicable to a great number of nations and contexts as the ongoing electronic transformation of the governmental revenue system contributes to efforts to transform governments through alternative services delivery venues and channels. We discover that intention to use automated systems as part of the governmental treasury function transformation is hindered by factors that mediate actual plans to do so, mostly in terms of normative pressures and perceptions of behavioral control, which training and education may well ameliorate. Hence, transformation of the treasury function in Turkey is only partially complete and will require additional support, direction and training on the part of the government in its interactions with the tax professionals who interact with the emergent automated system. 相似文献
The unlubricated wear behaviour of explosive shock treated and, subsequently plasma nitrided Ti–6Al–4 V alloy was studied using a ball-on-disc wear tester. Plasma nitriding was carried out at three different temperatures (700, 800 and 900 °C) for 3, 6, 9 and 12 h. Plasma nitriding after explosive shock treatment enabled a reduction in the wear rate of two orders of magnitude. Detailed investigations of this improved wear performance dependent on the nitriding temperature and time were carried out. The friction and wear data showed a clear breakthrough transition from the nitrided layer to the core of the Ti–6Al–4 V alloy matrix. The lowest wear volume was obtained for the sample, nitrided at 900 °C for 12 h, especially at loads of 2.5, 5 and 7.5 N. Obviously, the hard nitride layers were intimately associated with low wear rate, providing a smooth low friction surface. The coefficient of friction reduced from 0.46 to 0.2 due to a thick and hard compound layer resulting from a high nitrogen diffusion rate caused by explosive shock treatment that expected to increase point defects in the alloy. Detailed examination of the wear tracks showed that plasma nitriding changes the mechanism of wear from one of adhesion for untreated Ti–6Al–4 V to both delamination and mild abrasive. 相似文献
To evaluate the effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with DiaRoot BioAggregate (BA) when used as apical plugs. Forty single-rooted teeth were prepared using Peeso reamers. The samples were divided into four groups. The intracanal medicaments were applied to the root canals as follows: Group1: a combination of metronidazole–ciprofloxacin–cefaclor, Group2: a combination of metronidazole–ciprofloxacin, Group3: calcium hydroxide, and Group4: no medication. After 21 days, the medicaments were removed. The apical part of each root was horizontally sectioned into 1-mm thick slices. The samples were divided into two subgroups, and the following materials were placed: Biodentine, DiaRoot-BioAggregate. After 48-h incubation, the push-out bond strength was measured. The data were analyzed by a two-way ANOVA. Biodentine showed a significantly higher mean push-out bond strength value than DiaRoot-BioAggregate (P = 0.00). The medications have an effect on the push-out bond strength of both materials (P = 0.002). Biodentine showed better adhesive performance as an apical plug than DiaRoot-BioAggregate. 相似文献
This paper is concerned with the energy and exergy analyses of the thin layer drying process of mulberry via forced solar dryer. Using the first law of thermodynamics, energy analysis was carried out to estimate the ratios of energy utilization and the amounts of energy gain from the solar air collector. However, exergy analysis was accomplished to determine exergy losses during the drying process by applying the second law of thermodynamics. The drying experiments were conducted at different five drying mass flow rate varied between 0.014 kg/s and 0.036 kg/s. The effects of inlet air velocity and drying time on both energy and exergy were studied. The main values of energy utilization ratio were found to be as 55.2%, 32.19%, 29.2%, 21.5% and 20.5% for the five different drying mass flow rate ranged between 0.014 kg/s and 0.036 kg/s. The main values of exergy loss were found to be as 10.82 W, 6.41 W, 4.92 W, 4.06 W and 2.65 W with the drying mass flow rate varied between 0.014 kg/s and 0.036 kg/s. It was concluded that both energy utilization ratio and exergy loss decreased with increasing drying mass flow rate while the exergetic efficiency increased. 相似文献
Electroinitiated cationic copolymerizations of indene-4-methoxystyrene and indene-β-bromostyrene monomer couples were investigated in dichloromethane by constant potential electrolysis. Copolymer compositions were determined by i.r. spectroscopy and reactivity ratios for the monomers were calculated according to integrated Lewis-Mayo equation. The composition of copolymers and the reactivity ratios were discussed in terms of anodic peak potentials of monomers. 相似文献
The flame-quench-melt-growth (FQMG) method was used for the preparation of bulk YBa2Cu3O7?x (Y123). Both the superconducting and nonsuperconducting regions changing with thickness of superconducting sample were determined by X-ray diffraction (XRD) patterns and also observed at micrographs taken by the polarized optical microscope. It was observed that superconducting forming ratio which was examined for different thicknesses of the sample ranging from 6.54 to 1.58 mm strongly enhanced. This means that a region near the top surface of the sample contains more superconducting phase than the other regions. These observations would be helpful in designing and manufacturing the practical applications of YBCO systems. 相似文献