Improving microbiological food Safety in peri-urban Mali; an experimental study

IntroductionTwenty years ago, a WHO review of the literature assumed that most food-borne disease transmission in developing countries takes place within the home, and advocated a major programme of interdisciplinary research to develop and test cost-effective interventions to promote food hygiene.MethodsThe HACCP approach was applied step by step, to two selected weaning foods prepared by 15 volunteer mothers in peri-urban Mali. After setting Critical Control Points (CCP), actions were taken to control, reduce or eliminate microbial growth at these points. 432 food samples were collected and examined for thermotolerant coliforms in a local laboratory to assess the effectiveness of the approach. Lessons learnt were translated into messages delivered in a pilot study.ResultsTraditional cooking was very effective in eliminating faecal contamination; reheating was as effective as cooking when adopted, because there was no significant difference in the temperatures reached in both cases. Behavioural corrective actions were effective in controlling faecal contamination at the other CCPs (serving the child after cooking and after reheating).ConclusionIn conclusion, the HACCP experiment improved significantly the bacterial safety of both types of weaning food studied.     

Polypropylene/date stone flour composites: Effects of filler contents and EBAGMA compatibilizer on morphology,thermal, and mechanical properties

This work aims to study the effects of date stone flour (DSF) on morphology, thermal, and mechanical properties of polypropylene (PP) composites in the absence and presence of ethylene‐butyl acrylate‐glycidyl methacrylate (EBAGMA) used as the compatibilizer. DSF was added to the PP matrix at loading rates of 10, 20, 30, and 40 wt %, while the amount of compatibilizer was fixed to the half of the filler content. The study showed through scanning electron microscopy analysis that EBAGMA compatibilizer improved the dispersion and the wettability of DSF in the PP matrix. Thermogravimetric analysis (TGA) indicated a slight decrease in the decomposition temperature at onset (T_onset) for all composite materials compared to PP matrix, whereas the thermal degradation rate was slower. Differential scanning calorimetry (DSC) data revealed that the melting temperature of PP in the composite materials remained almost unchanged. The nucleating effect of DSF was however reduced by the compatibilizer. Furthermore, the incorporation of DSF resulted in the increase of stiffness of the PP composites accompanied by a significant decrease in both the stress and strain at break. The addition of EBAGMA to PP/DSF composites improved significantly the ductility due to the elastomeric effect of EBAGMA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Low-temperature growth of thick intrinsic and ultrathin phosphorous or boron-doped microcrystalline silicon films: Optimum crystalline fractions for solar cell applications

The growth kinetics and optoelectronic properties of intrinsic and doped microcrystalline silicon (μc-Si:H) films deposited at low temperature have been studied combining in situ and ex situ techniques. High deposition rates and preferential crystallographic orientation for undoped films are obtained at high pressure. X-ray and Raman measurements indicate that for fixed plasma conditions the size of the crystallites decreases with the deposition temperature. Kinetic ellipsometry measurements performed during the growth of p-(μc-Si:H) on transparent conducting oxide substrates display a remarkable stability of zinc oxide, while tin oxide is reduced at 200°C but stable at 150°C. In situ ellipsometry, conductivity and Kelvin probe measurements show that there is an optimum crystalline fraction for both phosphorous- and boron-doped layers. Moreover, the incorporation of p-(μc-Si:H) layers produced at 150°C in μc-Si:H solar cells shows that the higher the crystalline fraction of the p-layer the better the performance of the solar cell. On the contrary, the optimum crystalline fraction of the p-layer is around 30% when hydrogenated amorphous silicon (a-Si:H) is used as the intrinsic layer of p–i–n solar cells. This is supported by in situ Kelvin probe measurements which show a saturation in the contact potential of the doped layers just above the percolation threshold. In situ Kelvin probe measurements also reveal that the screening length in μc-Si:H is much higher than in a-Si:H, in good agreement with the good collection of microcrystalline solar cells     

Performance evaluation of Wi‐Fi and WiMAX over OFDM physical layer

Orthogonal frequency division multiplexing (OFDM) is an alternative technology that is constrained to keep up with the increasingly high data transmission rate due to its robustness against selective frequency fading and its resistance to intersymbol interference (ISI). This paper aims to study and optimize its performance, namely, its probability of communication failure and signal‐to‐interference‐plus‐noise ratio (SINR) metrics. The mathematical tool used to perform OFDM evaluation and analysis is the Fourier transform and its properties. The obtained results of those equations led to the demonstration of the probability of communication outage and to notice that the cutoff time occurs after the 10th iteration for values of λ less than or equal to 1. It could also be checked that this period is small if λ exceeds 1 by considering the sensitivity factor. Moreover, for the obtained results, in terms of bit error rate (BER) and SINR, the influence of the modulation on the error vector magnitude (EVM) shows the sensitivity factor Ω presents a key role in the transmission chain.     

Selection of pfcrt K76 and pfmdr1 N86 Coding Alleles after Uncomplicated Malaria Treatment by Artemether-Lumefantrine in Mali

Background: Artemether-lumefantrine is a highly effective artemisinin-based combination therapy that was adopted in Mali as first-line treatment for uncomplicated Plasmodium falciparum malaria. This study was designed to measure the efficacy of artemether-lumefantrine and to assess the selection of the P. falciparum chloroquine resistance transporter (pfcrt) and P. falciparum multi-drug resistance 1 (pfmdr1) genotypes that have been associated with drug resistance. Methods: A 28-day follow-up efficacy trial of artemether-lumefantrine was conducted in patients aged 6 months and older suffering from uncomplicated falciparum malaria in four different Malian areas during the 2009 malaria transmission season. The polymorphic genetic markers MSP2, MSP1, and Ca1 were used to distinguish between recrudescence and reinfection. Reinfection and recrudescence were then grouped as recurrent infections and analyzed together by PCR-restriction fragment length polymorphism (RFLP) to identify candidate markers for artemether-lumefantrine tolerance in the P. falciparum chloroquine resistance transporter (pfcrt) gene and the P. falciparum multi-drug resistance 1 (pfmdr1) gene. Results: Clinical outcomes in 326 patients (96.7%) were analyzed and the 28-day uncorrected adequate clinical and parasitological response (ACPR) rate was 73.9%. The total PCR-corrected 28-day ACPR was 97.2%. The pfcrt 76T and pfmdr1 86Y population prevalence decreased from 49.3% and 11.0% at baseline (n = 337) to 38.8% and 0% in patients with recurrent infection (n = 85); p = 0.001), respectively. Conclusion: Parasite populations exposed to artemether-lumefantrine in this study were selected toward chloroquine-sensitivity and showed a promising trend that may warrant future targeted reintroduction of chloroquine or/and amodiaquine.     

Mustard bran in lactating dairy cow diets

Two trials using lactating Holstein cows were conducted to evaluate effects of a diet containing oriental mustard bran on dry matter intake (DMI), milk production, milk components, and organoleptic properties. In experiment 1, 34 lactating cows (24 multiparous and 10 primiparous; days in milk ≥50 d) were used in a switchback design to determine the lactational response and organoleptic quality of milk when the diet contained 8% oriental mustard bran (MB) versus a control diet (CON). Mustard bran replaced a portion of soybean meal and all the beet pulp in the CON diet. Milk yields were greater for cows fed the MB diet; however, no differences were found in DMI, 3.5% fat- (FCM) or solids-corrected milk. Milk components and components production were not affected by treatment. Milk organoleptic qualities were not affected by diet. In experiment 2, 22 lactating cows (16 multiparous and 6 primiparous; days in milk ≥21 d) were assigned randomly within parity to receive MB or CON from wk 4 to 19 postpartum in a randomized complete block design. Cows were fed CON wk 1 to 3 postpartum. The MB diet contained the same ingredients as the CON, except sunflower seed and a portion of soybean meal were replaced with mustard bran. Milk and components data were collected during wk 3 postpartum and used as covariates to adjust treatment means. Intake was greater for cows fed the MB diet; however, daily milk, 3.5% FCM, and solids-corrected milk yields were not different between diets. Milk components and component yields were not affected by treatment. Milk urea concentration was less for cows fed the MB diet. Although cows fed the MB diet had greater DMI, this was not translated into a higher milk 3.5% FCM/DMI production efficiency ratio. During experiment 2, many cows fed MB experienced minor to severe hemolysis with bloody urine. This hemolysis believed to be caused by the S-methyl-cysteine sulfoxide contained in mustard bran could have affected milk production efficiency. The increased milk yield observed in experiment 1 was not observed in experiment 2. Adding 8% of MB to lactating cow diets had a mixed effect on DMI and milk production. Milk component yields and milk quality were not affected. Feeding this level of MB presents a hemolytic danger to lactating dairy cows.     

Improved training tolerance by supplementation with alpha-Keto acids in untrained young adults: a randomized, double blind, placebo-controlled trial

ABSTRACT: BACKGROUND: Exercise causes a variety of physiological and metabolic changes that can in turn reduce exercise tolerance. One of the potential mechanisms responsible for fatigue is "exercise-induced hyperammonemia". Previous studies have shown that supplementation with amino acids can increase training tolerance. The alpha-keto acids are biochemical analogs of amino acids and can be converted to amino acids through transamination, thus reducing the cellular ammonia level. This double blind, placebo-controlled study was designed to investigate the effects of alpha-keto acid supplementation (KAS) on training tolerance, training effect, and stress-recovery state. METHODS: Thirty-three untrained young male adults underwent four weeks of training (5 sessions/week; 30 minutes running at the individual anaerobic threshold followed by 3 x 3 minute sprints/each session). Throughout the 4 weeks of training and one week of recovery, subjects took alpha-ketoglutarate (AKG group, 0.2 g/kg/d, n=9), branched-chain keto acids (BCKA group, 0.2 g/kg/d, n=12) or isocaloric placebo (control group, n=12) daily. RESULTS: The 4th week training volume, maximum power output and muscle torque were higher in the AKG group (175+/-42 min, 412+/-49 Watts and 293+/-58 Newton meters, respectively, P<0.05) and the BCKA group (158+/-35, 390+/-29 and 273+/-47, P<0.05) than in the control group (92+/-70, 381+/-67 and 233+/-43). The general stress and emotional exhaustion as assessed by the rest-stress-questionnaire-sport after the 3rd week of training increased significantly in the control group (P<0.05), but not in the KAS groups. CONCLUSIONS: Under KAS, subjects could bear a higher training volume and reach a higher power output and peak muscle torque, accompanied by a better stress-recovery-state. Thus, KAS improves exercise tolerance and training effects along with a better stress-recovery state. Whether the improved training tolerance by KAS is associated with effects on ammonia homeostasis requires further observation.     

多孔颗粒吸附速度机理的研究

利用质量传递微分方程,根据多孔颗粒的边界条件建立了理论模型,推导出了多孔颗粒的吸附速度方程,并以13X-水工质对为例,对其正确性进行了验证;同时,从机理上确定了传质系数K与相关的各参数之间的函数关系,求出了该方程中的参数ε的函数表达式。     

13X分子筛孔径分布与吸附特性间关系的研究

以温度、压力为中间变量建立了13X分子筛-水体系的孔径分布和吸附量之间的函数关系;利用相关的函数关系式及所对应的示意图,同时参照实验数据及其拟合的吸附等温曲线,得出了在实际制冷系统中各部分的温度和压力对系统性能的影响以及由此所决定的13X分子筛-水体系制冷系统的特性。