Hydrogenation behavior on 30 nm vanadium thin films with two different adhesion conditions

The influence of a thin polycarbonate de-adhesion layer on the hydrogen concentration is studied on 30 nm vanadium films deposited on glass substrates, using electrochemical hydrogenography in an optical microscopy and scanning tunneling microscopy. It is shown that the optical reflection provides information about the de-adhesion morphology (buckles) while the optical transmission signal gives information about concentration and film thickness changes. Artificially patterned samples allow simultaneous studying adhered and de-adhered film parts, for similar mean concentrations. The optical data clearly show a different hydrogen behavior of the two parts. Data interpretation suggests higher local hydrogen content in the adhered film parts than for the detached films parts. Strong changes in the optical transmission of the adhered film parts can be attributed to strong morphological changes at the film surface. These changes are mainly attributed to grain sliding processes in the vanadium film.     

In-house and interlaboratory validation of a method for the extraction of DNA from maize starch

Here, we describe the procedure of a DNA extraction method from maize starch including the method??s validation by in-house and interlaboratory tests. The amplifiable amount of maize DNA tested by real-time PCR was used as parameter for evaluating our method. The practical (i.e. relative) limit of detection (LOD) was used as key criterion for assessing the suitability of the extraction method with respect to genetically modified organism analysis. In a round-robin test with ten participating laboratories, satisfactory results were achieved with practical LODs in the range of 0.1?% with three native maize starch materials. In-house tests showed that this protocol??with an additional purification step??can also be applied for extracting DNA from chemically or enzymatically modified starch.     

Food and Nutrition: Focus on the Molecular Level

No Abstract.     

Interface quality and thermal stability of laser-deposited metal/MgO multilayers

Metal/MgO multilayers (metal of Fe, Ni80Nb20, and Ti) with bilayer periods in the range 1.2-3.0 nm have been prepared by pulsed laser deposition and characterized by both hard and soft-x-ray reflectometry. The interface roughness is found to be < or = 0.5 nm in all the samples and is nearly independent of the total number of deposited bilayers. The interface roughness, however, depends on the absolute thickness of the individual layers and increases from approximately 0.3 nm for a 3.0-nm period to approximately 0.5 nm for a bilayer period of 1.2 nm. The multilayers are found to be highly stable up to temperatures as high as 550 degrees C. The hard-x-ray reflectivity of the multilayers decreases for T > 300 degrees C, whereas the layered structure is stable up to 550 degrees C. The reflectivity in the water window region of soft x rays, lambda = 3.374 nm, was found to be 0.4% at an angle of incidence of approximately 54 degrees for multilayers with 60 bilayers at a period of approximately 2.1 nm.     

Online Mesh Refinement for Parallel Atmospheric Models

Forecast precisions of climatological models are limited by computing power and time available for the executions. As more and faster processors are used in the computation, the resolution of the mesh adopted to represent the Earth’s atmosphere can be increased, and consequently the numerical forecast is more accurate. However, a finer mesh resolution, able to include local phenomena in a global atmosphere integration, is still not possible due to the large number of data elements to compute in this case. To overcome this situation, different mesh refinement levels can be used at the same time for different areas of the domain. Thus, our paper evaluates how mesh refinement at run time (online) can improve performance for climatological models.The online mesh refinement (OMR) increases dynamically mesh resolution in parts of a domain,when special atmosphere conditions are registered during the execution. Experimental results show that the execution of a model improved by OMR provides better resolution for the meshes, without any significant increase of execution time. The parallel performance of the simulations is also increased through the creation of threads in order to explore different levels of parallelism.     

Entkohlungs- und Desoxydationsvorgänge im flüssigen Eisen

Heterogene Keimbildung bei der Entkohlungsreaktion. Homogene Keimbildung bei der Fällungsdesoxydation mit Zirkon. Deutung auf der Grundlage der Volmerschen Theorie der Keimbildung. Kernbildung als geschwindigkeitsbestimmender Schritt.     

Acoustic startle response and habituation in freezing and nonfreezing rats.

Divided rats according to their responses to startle-eliciting stimuli into 2 groups with different emotional states. About half of the 54 female Sprague-Dawley rats showed long-lasting freezing behavior after 1–8 stimuli (10 kHz, 110 dB spl). In freezing rats the startle amplitude was higher than in nonfreezing rats, even on the very first startle response. This finding demonstrates that the anxiety state of these animals before the 1st startle-eliciting stimulus, and not just the aversiveness of the stimulus, contributes to freezing behavior. In addition, in freezing rats there was no influence of spontaneous motor activity or of adaptation time on startle amplitude. Only in nonfreezing rats were high motor activities correlated with lowered startle amplitudes, and only in these rats did the course of startle habituation depend on adaptation time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)