Vinyl ester/clay based nanocomposites: a complementary study of vinyl ester polymerization by hyphenated rheo‐Fourier transform infrared and separate rheology/Fourier transform infrared measurements

This work is focused on the complementary information obtained from advanced in situ Fourier transform infrared (FTIR) spectroscopy and rheological measurements to correlate the structural changes with rheological properties upon polymerization of different organically modified montmorillonite clay/vinyl ester composites prepared by in situ polymerization. The microstructure and morphology of the nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The effect exerted by the presence of organic clay on the polymerization reaction of a vinyl ester based polymer matrix was evaluated. In situ and ex situ rheo‐FTIR measurements were compared to demonstrate the accuracy of this technique. © 2013 Society of Chemical Industry     

Side-chain type benzoxazine-functional cellulose via click chemistry

A side-chain type benzoxazine-functional cellulose has been developed using click chemistry via the reaction of ethynyl-monofunctional benzoxazine monomer and azide-functional cellulose. The synthesis, crosslinking, and thermal properties of the benzoxazine-functional cellulose are studied by NMR, FTIR, DSC, and TGA. The crosslinking reaction of the benzoxazine side-chain unusually takes place at low-temperatures in comparison to an ordinary benzoxazine resins. Upon crosslinking, the polymer shows high char yield of 40%, which is a marked improvement from a mere 4% of the unfunctionalized cellulose. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Silicon-29 solid-state nuclear magnetic resonance spectroscopy of composite interfaces

The types of structures and bonds that are formed with silicons in the composite interface were studied using ²⁹Si cross-polarization/magic angle sample spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR). The change in mobility of silane coupling agent bonded to silica, as compared with bulk hydrolyzed silane coupling agent, can be monitored by the change in line width and the shift of resonances to higher fields, as well as by the change in the silicon-proton cross-polarization time T_SiH. In the silane coupling agent-matrix resin interface, the T_SiH values reflect the change in mobility as a function of the concentration and degree of hydrolysis of the silane coupling agent. It has been demonstrated that quantitative measurements of T_SiH can be used to investigate relative mobilities.     

Controlling and monitoring interfacial reactions in composites of azidosilane modified glass filled polyethylene

Model composites of spherical glass particles dispersed in a matrix of high density polyethylene were prepared with controlled variations in the interfacial structure. Dynamic-mechanical measurements of the composites in the melt state were recorded. The physical properties are found to relate to the morphology, bonding, reactivity, and other characteristics of the interfacial region which can be controlled by the applied chemistry. The interfacial reactions can be monitored in-sity by dynamic-mechanical analysis and differential scanning calorimetry.     

Poly(aryl-ether-ether-ketone) and its advanced composites: A review

Poly(aryl-ether-ether-ketone) or PEEK is a highly aromatic semi-crystalline thermoplastic. Its good mechanical properties and solvent resistances rank it as one of the most promising matrix polymers for high performance composites. This article attempts to provide an in-depth review of work on PEEK and fiber-reinforced PEEK composites. Discussions on various areas including synthesis, molecular weight determination, solution properties, structural hierarchy, morphology and mechanical properties of both neat polymer and composites, will be provided. In addition, environmental effects such as physical aging, thermal aging, moisture, solvents, and radiation will be summarized.     

Vasopressor effect of lysophosphatidic acid on spontaneously hypertensive rats and Wistar Kyoto rats

Early endothelial injury may play a role in the development of transplant arteriosclerosis. The present study documents early endothelial changes using a rat aortic graft model. Abdominal aortic allografts from PVG rats were orthotopically transplanted to DA rats. Controls were DA to DA transplants. Endothelial cell (EC) injury, regeneration, and leukocyte infiltration in the intima were evaluated using scanning electron microscopy and histological and immunocytochemical techniques. Nontransplanted aortic segments showed partial loss of ECs after 1 or 2 hr of preservation. Control isografts demonstrated extensive EC denudation and neutrophil adherence to residual ECs at 1 day post-transplantation. After 3 days, isografts showed continued regeneration of ECs in the central area and ingrowth of endothelium from both clamped sites in the recipient aorta. Reendothelialization was complete by day 14. Allografts showed similar findings to isografts up to day 3. In contrast to isografts, however, there was a secondary EC loss beginning at day 7. Monocytes/macrophages and T cells were noted to be adherent to residual ECs in 7- and 14-day allografts. At 20 days, ECs were absent from the luminal surface in the center of allografts. Endothelium did extend from clamped sites toward the midgraft region as in isografts. By 60 days allografts were completely reendothelialized. These results demonstrate that in both isografts and allografts there is initial EC loss due to mechanical trauma and ischemia/reperfusion injury, followed by partial reendothelialization. This latter process continues unabated in isografts, whereas in allografts the secondary EC loss occurs due to an allogenic response. This is followed by complete reendothelialization that occurs during the concurrent development of significant intimal hyperplasia.     

RIM-pultrusion of nylon-6 and rubber-toughened nylon-6 composites

Unidirectionally reinforced thermoplastic composites of Nylon-6 and polypropylene oxide-Nylon-6 block copolymers have been prepared by the reaction injection molding (RIM)-pultrusion process. This process takes advantage of both the RIM and the pultrusion techniques, while avoiding their inherent shortcomings. It also represents a novel way of incorporating toughening rubber domains into a thermoplastic composite. The composites produced exhibit excellent mechanical integrity with essentially zero void content. The chemical and physical states of the composites produced by the process were probed in terms of mechanical relaxation behavior using a dynamic mechanical spectrometer. Due to the simultaneous occurrence of both polymerization and crystallization processes in the reacting system, the resulting material is in a thermodynamically nonequilibrium state. An annealing effect is shown to correspond structurally to an increase in matrix crystallinity and the degree of phase separation, Izod impact tests were used to compare Nylon-6 and rubber-toughened Nylon-6 RIM-pultruded composites. The potential of secondary processing was, demonstrated by compression molding of the RIM-pultruded composite rods.     

The efficiency of helical strakes for the suppression of vortex-excited oscillation of steel stacks

Helical strikes are well known as a device to suppress the vortex-excited oscillation of stacks and have been applied to some stacks to prevent the oscillation. Wind tunnel experiments on two-dimensional models were performed to reconsider the optimum configuration of the strakes. Based on the model experimental results, the effectiveness of the strakes was confirmed by experiments on an actual stack. Finally, the stack with strakes was shown to be more economical than the plain stack without strakes.     

Fourier transform infrared spectroscopic study of transitions above Tg in atactic polystyrene

Fourier transform infrared spectroscopy (FT-IR) has been applied to the study of the molecular mechanisms of transitions of atactic polystyrene above T_g. Intensity measurements of vibrational modes as a function of temperature revealed two transitions above T_g, which are designated as T_u and T′_u. T′_u is independent of molecular weight as opposed to the molecular weight dependent T_u whose behavior is similar to T_g. Infrared measurements are more sensitive to T′_u than T_u. Conformationally sensitive bands show that T′_u may be related to disruption of local order where there is a negligible barrier to conformational change.