Sediment flux from Lesser Zab River in Dokan Reservoir: Implications for the sustainability of long‐term water resources in Iraq

Prudent management of Iraqi water resources under climate change conditions requires plans to be based on actual figures of the storage capacity of existing reservoirs. With the absence of sediment flushing measures, the actual storage capacity of Dokan Reservoir (operated since 1959) has been affected by the amount of sediment delivered during its operational life leading to an undetermined reduction in its storage capacity. In consequence, there has not been an update on the dam's operational storage capacity curves. In this research, new operational curves were established for the reservoir based on a recent bathymetric survey undertaken in 2014. The reduction in reservoir capacity during the period between 1959 and 2014 was calculated by the mean of the difference between the designed storage capacity and the storage capacity which was concluded from the 2014 bathymetric survey. Moreover, the rate of sediment transported to the reservoir was calculated based on the overall quantities of accumulated sediment and the water discharge of the Lesser Zab River into the reservoir. The results indicate that the dam capacity is reduced by 25% due to sedimentation of an estimated volume of 367 million cubic metres at water level 480 m.a.s.l. The annual sedimentation rate was about 6.6 million cubic metres, and the sediment yield was estimated to be 701.2 t?km^?3?year.     

Rheological characterization of hair shampoo in the presence of dead sea salt

In Jordan, a growing industry has been established to produce different types of Dead Sea (DS) cosmetics that have DS salt (contains mainly NaCl, KCl, and MgCl(2)) in their formulas. In this work, the effect of DS salt on the rheology of hair shampoo containing the sodium lauryl ether sulfate as a main active matter was studied. The effects of DS salt and active matter concentration, and the temperature and time of salt mixing, on the rheological properties of hair shampoo were investigated. The salt-free shampoo showed a Newtonian behavior at 'low active matter' (LAM) and shear thinning at 'high active matter' (HAM). The presence of DS salt changed the rheological behavior of LAM shampoo from Newtonian (for the salt-free shampoo) to shear thinning. On the other hand, the behavior of HAM shampoo switched from shear thinning to Newtonian behavior in the presence of high concentration of DS salt. The addition of DS salt increased the apparent viscosity of shampoo to reach a maximum value that corresponded to a salt concentration of 1.5 wt.%. Further addition of DS salt led to a decrease in the shampoo viscosity to reach a value less than that of the salt-free sample at high salt concentration. Changing the mixing temperature (25-45 degrees C) and mixing time (15-120 min) of DS salt with shampoo has no significant influence on the rheological behavior. However, the mixing process increased the apparent viscosity of salt-free shampoo. The power law model fitted well the flow curves of hair shampoo with and without DS salt.     

Performance of wellhead chokes during sub-critical flow of gas condensates

Field data from three key wells producing from a gas condensate reservoir located in the Middle East were implemented to test a new plotting technique to describe the sub-critical flow behavior of gas condensates through wellhead chokes. Empirical correlations were developed for eight different choke sizes between 24/64 in. and 128/64 in. These correlations can be applied to predict gas flow rates under wide range of flow conditions usually encountered during the flow of gas condensates through wellhead chokes. Using the proposed plotting technique, all ninety seven data points were found to follow a clear trend which can accurately predict the observed gas flow rates under the specified range of parameters involved in this study. In an attempt to develop a general correlation which includes the choke size as a variable, the same data points were used in a non-linear regression analysis. Based on five statistical measures, the results of gas flow rates calculated by the general formula were compared with those calculated by the individual choke size formulae, and the latter were found superior. This paper presents a simple, yet accurate, method of predicting gas flow rates for a specified choke size under sub-critical flow conditions through chokes. It can also be used to select the choke size necessary to achieve a required gas flow rate. The results of this work are very important in the design and implementation of deliverability tests, pressure transient tests, well control, and long-term well production of gas condensates.     

Performance of phase change material boards under natural convection

The high thermal storage capacity of phase change material (PCM) can reduce energy consumption in buildings through energy storage and release when combined with renewable energy sources, night cooling, etc. PCM boards can be used to absorb heat gains during daytime and release heat at night. In this paper, the thermal performance of an environmental chamber fitted with phase change material boards has been investigated. During a full-cycle experiment, i.e. charging–releasing cycle, the PCM boards on a wall can reduce the interior wall surface temperature during the charging process, whereas the PCM wall surface temperature is higher than that of the other walls during the heat releasing process. It is found that the heat flux density of the PCM wall in the melting zone is almost twice as large as that of ordinary wall. Also, the heat-insulation performance of a PCM wall is better than that of an ordinary wall during the charging process, while during the heat discharging process, the PCM wall releases more heat energy. The convective heat transfer coefficient of PCM wall surface calculated using equations for a normal wall material produces an underestimation of this coefficient. The high convective heat transfer coefficient for a PCM wall is due to the increased energy exchange between the wall and indoor air.     

Improvements and limitation of soy protein-based adhesive: A review

Soy protein is known for its eco-friendly, sustainable, and biodegradable qualities that are likely used as raw material in producing bioadhesive. However, soy protein-based adhesive are lacking in terms of adhesive strength and water-resistance compared to commercial formaldehyde-based adhesives such as phenol and urea-formaldehyde resin. Therefore, continuous research has been done to improve adhesive performance. This can be done via physical or modification methods, including the usage of cross-linking agents, structural modification, enzymatic modification, and the addition of additives. This review will cover these modification methods that give significant enhancement to the water-resistance and adhesive strength of soy protein-based adhesives.     

Lip syncing method for realistic expressive 3D face model

Lip synchronization of 3D face model is now being used in a multitude of important fields. It brings a more human, social and dramatic reality to computer games, films and interactive multimedia, and is growing in use and importance. High level of realism can be used in demanding applications such as computer games and cinema. Authoring lip syncing with complex and subtle expressions is still difficult and fraught with problems in terms of realism. This research proposed a lip syncing method of realistic expressive 3D face model. Animated lips requires a 3D face model capable of representing the myriad shapes the human face experiences during speech and a method to produce the correct lip shape at the correct time. The paper presented a 3D face model designed to support lip syncing that align with input audio file. It deforms using Raised Cosine Deformation (RCD) function that is grafted onto the input facial geometry. The face model was based on MPEG-4 Facial Animation (FA) Standard. This paper proposed a method to animate the 3D face model over time to create animated lip syncing using a canonical set of visemes for all pairwise combinations of a reduced phoneme set called ProPhone. The proposed research integrated emotions by the consideration of Ekman model and Plutchik’s wheel with emotive eye movements by implementing Emotional Eye Movements Markup Language (EEMML) to produce realistic 3D face model.     

Properties of chemically treated natural amorphous silica fibers as polyurethane reinforcement

A novel kind of short natural fiber obtained from mineral resources, which consists mainly of pure amorphous SiO₂, was chemically modified with aminosilane to improve its interfacial adhesion in polyurethane composites. The effect of the treatment as well as the aspect ratio of the fibers on the mechanical properties of the composite were evaluated and compared with properties obtained with glass fibers composites, which are commonly used in industry. The results obtained show that these natural fibers are potential candidates for the substitution of glass fibers as a reinforcement phase in polymer composites, since the mechanical properties obtained were in all cases equal or superior to the ones obtained with commercial glass fibers. POLYM. COMPOS. 27:582–590, 2006. © 2006 Society of Plastics Engineers.     

Detection of copy-move image forgery based on discrete cosine transform

Since powerful editing software is easily accessible, manipulation on images is expedient and easy without leaving any noticeable evidences. Hence, it turns out to be a challenging chore to authenticate the genuineness of images as it is impossible for human’s naked eye to distinguish between the tampered image and actual image. Among the most common methods extensively used to copy and paste regions within the same image in tampering image is the copy-move method. Discrete Cosine Transform (DCT) has the ability to detect tampered regions accurately. Nevertheless, in terms of precision (FP) and recall (FN), the block size of overlapping block influenced the performance. In this paper, the researchers implemented the copy-move image forgery detection using DCT coefficient. Firstly, by using the standard image conversion technique, RGB image is transformed into grayscale image. Consequently, grayscale image is segregated into overlying blocks of m × m pixels, m = 4.8. 2D DCT coefficients are calculated and reposition into a feature vector using zig-zag scanning in every block. Eventually, lexicographic sort is used to sort the feature vectors. Finally, the duplicated block is located by the Euclidean Distance. In order to gauge the performance of the copy-move detection techniques with various block sizes with respect to accuracy and storage, threshold D_similar = 0.1 and distance threshold (N)_d = 100 are used to implement the 10 input images in order. Consequently, 4 × 4 overlying block size had high false positive thus decreased the accuracy of forged detection in terms of accuracy. However, 8 × 8 overlying block accomplished more accurately for forged detection in terms of precision and recall as compared to 4 × 4 overlying block. In a nutshell, the result of the accuracy performance of different overlying block size are influenced by the diverse size of forged area, distance between two forged areas and threshold value used for the research.

     

Oxygenation absorption and light scattering driven facial animation of natural virtual human

Multimedia Tools and Applications - The color of skin is one of the key indicators of bodily change that affect facial expressions. The skin colour tenacity is majorly determined by the light...