Über die Anwendung von Ionensensitiven Feldeffekttransistoren zur Untersuchung von Korrosionsvorgängen

On the application of ion sensitive field-effect transistors for the investigation of corrosion phenomena Ion sensitive field-effect transistors (ISFET) are chemical sensors based on semiconductor technology. They exhibit small dimensions, a plane measuring surface and have short response times. Thus, they are very suitable for the determination of local changes of the pH value at electrochemical corrosion studies. The described in this paper experimental set-up allows in situ measurements of the pH value by means of ISFET sensors in amounts of liquids below 1 mm³; the active surface area of the material under test may be below 1 mm². In model tests preferably changes of the pH value of dist. water due to the corrosion of steel St 38 have been investigated. After an initial short-time rise caused by oxygen reduction a decay of the pH value to pH = 3 ?4 was obseved. Furthermore, ISFET sensors have been used as a potential probe for electrochemical polarization measurements in low conductive media. It was shown, that the dynamic behaviour of potentiostatic control circuits may be influenced favourably by the low output resistance of the ISFET.     

Stability of proximal femoral grafts in canine hip arthroplasty

In a canine model, the fixation stability of a prosthesis and proximal bone graft composite were measured relative to the distal femur. One group had the prosthesis graft composite cemented into the distal femur. The second group had the prosthesis graft composite press fit into the distal femur for biologic ingrowth. Displacements of the proximal femoral grafts relative to the host bone in each group were measured after ex vivo (acute with graft) implantation and 4 months after implantation. A third group with no osteotomy (acute intact) simulated perfect graft to host bone union. Relative displacements representing 6 degrees freedom (translation and rotation) were calculated from the displacement values measured by 9 eddy current transducers. Measurements of displacement were used to test the hypothesis that distal press fit fixation equals distal cement fixation at 4 months after implantation. In all cases the measured translations and rotations of the graft to implant construct were small and of a magnitude that should encourage bone ingrowth (< 0.05 mm and < 0.1 degree, respectively). The stability of the press fit group at 4 months was not significantly different from the cemented group in axial and transverse displacement during axial and transverse loading, respectively. There was no difference in stabilities at 4 months between distal press fit and cemented fixation in hip replacements requiring a proximal femoral graft.     

New energy transfer dyes for DNA sequencing

We have synthesized a set of four energy transfer dyes and demonstrated their use in automated DNA sequencing. The donor dyes are the 5- or 6-carboxy isomers of 4'-aminomethylfluorescein and the acceptor dyes are a novel set of four 4,7-dichloro-substituted rhodamine dyes which have narrower emission spectra than the standard, unsubstituted rhodamines. A rigid amino acid linker, 4-aminomethylbenzoic acid, was used to separate the dyes. The brightness of each dye in an automated sequencing instrument equipped with a dual line argon ion laser (488 and 514 nm excitation) was 2-2.5 times greater than the standard dye-primers with a 2 times reduction in multicomponent noise. The overall improvement in signal-to-noise was 4- to 5-fold. The utility of the new dye set was demonstrated by sequencing of a BAC DNA with an 80 kb insert. Measurement of the extinction coefficients and the relative quantum yields of the dichlororhodamine components of the energy transfer dyes showed their values were reduced by 20-25% compared with the dichlororhodamine dyes alone.     

An integral system‐ergonomic approach for IT‐based process management in complex work environments by example of manufacturing and health care

Recent trends in manufacturing and health care move these two work systems closer together from a system ergonomics point of view. Individual treatment of products, especially patients, by specialists in a distributed environment demand information technology (IT)‐based support suitable for complex systems. IT‐based support of processes in complex systems is difficult due to the lack of standard processes. IT support also means to rethink processes to use efficiency potentials. Close cooperation of users and software developers is needed to increase the ergonomic quality of the system. Therefore, suitable tools are needed: UML is available as the standard industry modeling language, Zope/Plone as the quasi‐standard for content management systems, SimPy as an object‐oriented simulation tool for event‐triggered processes, and ACT‐R as a powerful cognitive architecture for simulation of human information processes. The integration of these tools enables system‐ergonomic support of processes in the complex work system as well as of the development and deployment process. It is the base of an integral system‐ergonomic approach for IT‐based process management. Knowledge gained during process analysis either enters models or leads to the extension and adaptation of the tool chain. The models serve as basis for discussion among system ergonomists, programmers, and specialists from the work system. Further, they are understood by simulation and process support tools. Transcoding efforts between humans with different professional backgrounds and machines are reduced, and the flexibility demanded by complex systems is met. © 2008 Wiley Periodicals, Inc.     

Natural perspective projections for head-mounted displays

The display units integrated in today's head-mounted displays (HMDs) provide only a limited field of view (FOV) to the virtual world. In order to present an undistorted view to the virtual environment (VE), the perspective projection used to render the VE has to be adjusted to the limitations caused by the HMD characteristics. In particular, the geometric field of view (GFOV), which defines the virtual aperture angle used for rendering of the 3D scene, is set up according to the display field of view (DFOV). A discrepancy between these two fields of view distorts the geometry of the VE in a way that either minifies or magnifies the imagery displayed to the user. It has been shown that this distortion has the potential to affect a user's perception of the virtual space, sense of presence, and performance on visual search tasks. In this paper, we analyze the user's perception of a VE displayed in a HMD, which is rendered with different GFOVs. We introduce a psychophysical calibration method to determine the HMD's actual field of view, which may vary from the nominal values specified by the manufacturer. Furthermore, we conducted two experiments to identify perspective projections for HMDs, which are identified as natural by subjects--even if these perspectives deviate from the perspectives that are inherently defined by the DFOV. In the first experiment, subjects had to adjust the GFOV for a rendered virtual laboratory such that their perception of the virtual replica matched the perception of the real laboratory, which they saw before the virtual one. In the second experiment, we displayed the same virtual laboratory, but restricted the viewing condition in the real world to simulate the limited viewing condition in a HMD environment. We found that subjects evaluate a GFOV as natural when it is larger than the actual DFOV of the HMD--in some cases up to 50 percent--even when subjects viewed the real space with a limited field of view.     

A consideration of the nature of work and the consequences for the human-oriented design of production and products

In this article, it is shown that human work can be understood as a process of creating order, and that order can be seen as a form of information. Since information can be considered as negative entropy, work is associated with energy consumption. Therefore, it is important to investigate the nature of human necessities in more detail in order to meet the desire for comfort through the efficient application of energy. Temporary increases of information cause accelerated increases in entropy. This explains the appearance of living organisms, and the historic development of increasingly complex technology. Through technical progress, repetitive human work is being replaced by automation, so that primarily creative work remains. Now the question arises of how much creative work a human can manage. In addition, one goal of automation should be the reduction of human errors, but in doing so, an optimal balance should be found between supporting the operator both during normal procedures and during unforeseen circumstances.     

„Medizinische Notwendigkeit“: Herausforderungen eines unscharfen Begriffs

Definition of the problem

“Medical necessity” (MedN) is the central regulatory concept for decisions about which services are covered by German statutory health insurance. Despite its seeming objectivity and dependence on physicians’ expert judgment, the concept is by no means clearly defined.

Arguments

In this first of five planned papers on the conceptual analysis of MedN from the perspectives of philosophy and ethics of medicine, law, and (social) medicine, the focus lies on systemizing ongoing controversies.

Conclusion

Our goal is to come up with a so far missing foundation for detailed debates. We aim to clarify MedN’s conceptual structure, function, contextuality, and ambiguities as well as the fundamental limits of conceptual investigations for the normative questions at issue of regulating medical services.

     

Nanohybrid Materials with Tunable Birefringence via Cation Exchange in Polymer Films

In this work, a nanohybrid material based on a freestanding polymeric liquid crystal network capable of postmodification via cation exchange to tune birefringence is proposed. The smectic liquid crystal films can be infiltrated with a variety of cations, thereby changing the refractive indices (n_e and n_o) and the effective birefringence (Δn) of the nanohybrid material, with reversible cation infiltration occurring within minutes. Birefringence could be tuned between values of 0.06 and 0.19, depending on the cation infiltrated into the network. Upon infiltration, a decrease in the smectic layer spacing is found with layer contraction independent of the induced change in birefringence. Potential applications are in the field of specialty optical devices, such as flexible, retunable reflective filters.