Verbesserung des Vakuums in Isoliergefäßen aus Glas

Improving the vacuum would increase the insulation capacity of commercially available glass containers by a factor of about two. To do this, pressures of 10^?4 mbar must be attained. Different approaches were taken to meet this objective. As an alternative to today's commonly practiced sealing method, three possibilities are introduced which eliminate the necessity of pump stub narrowing which causes reduced conductance. Furthermore, depending on the sealing process used, the gases occuring during sealing are either avoided completly or they can at least be reduced by having the chance of exact temperature control resp. by a lower separation temperature. A completly different approach was taken by using Getters, of which a metal hydride on a TiVMn base proved especially suitable. It is activated by heat and can be integrated into the normal production process without any problem. Aside from a shorter pump period, the added advantage here is the containment of the gasses occuring during sealing as well as that of the longterm gasses.     

Estimating the load line displacement of cracked laboratory specimens using the engineering treatment model (ETM)

The Engineering Treatment Model (ETM) provides a means for estimating the load line displacement of a cracked body. Under contained yielding conditions the model uses available linear elastic solutions with an Irwin-type plasticity correction of the crack length. The magnification factor (F/F_y)^1/n describing the material's strain hardening behaviour is applied for extrapolation into the regime of net section yielding. Comparison of ETM estimates with finite element and experimental results shows that the assumptions of the model are realistic.     

Untersuchung des einflusses molekularer parameter auf morphologie und eigenschaften von polyethylenen niedriger dichte

Based on the example of PE-LD grades and on model substances obtained by preparative fractionation (fractions in the molecular weight range M?_w = 1.2 ? 390·10⁴ g/mol), comprehensive investigations regarding the problems of structure/properties have been carried out. The correlations of M?_w with 15 physical and application technological perameters have been investigated taking into account the reaction mechanism during the manufacturing of PE-LD in the tubular and agitated autoclave reactor, resulting in the formation of so-called primary structure perameters M?_n, M?_w, molar mass distribution, short chain branching and long chain branching. For the interpretation of the results, among other factors, also the morphological conditions have been taken into consideration, which in connection with the molecular parameters reveal — for specific M?_w-ranges — strong changes and saturation ranges, resp., for the physical and application technological properties.     

Synthese von substituierten benzotriazolen zur stabilisierung aromatischer polyamide gegen UV-licht

2-(2′-Hydroxyphenyl)-benzotriazoles, containing a carbonamide group in 5- or 5′-position, were synthesized to stabilize polyamides. The influence of the ortho-positioned hydroxy group for the stabilizing effect of these substances was examined by methylating it. The synthesized benzotriazoles were characterized, especially with regard to their UV-absorption-spectra. The photolytic resistance of poly-(m-phenyleneisophthalamide), containing these stabilizers, for example 2-(2′-hydroxy-5′-tert-butylphenyl)-benzotriazol-5-carbonic acid anilide, was examined by measuring the viscosity.     

The oxidation and self-heating of metal sulphides as an electrochemical corrosion phenomenon

Experiments with a representative number of technically interesting metal sulphides trace out hydrogen peroxide as the reactive intermediate of sulphide oxidation. It is formed through an electrochemical reduction of molecular oxygen. The formation of sulphur or sulphate as the final state of oxidation is determined by consecutive reactions which are critically dependent on the catalytical properties of the surface and the solution for hydrogen peroxide decomposition. The individual steps of the reaction are discussed in some detail. Conclusions with respect to a possible control of the autogeneous heating are drawn.