Photon interaction with semiconductor and scintillation detectors

Molten salt is used as primary coolant flowing through graphite moderator channel of a molten salt reactor.Working at high temperature under radiation environment,the pore network structure of nuclear graphite should be well understood.In this paper,X-ray tomography is employed to study the 3D pore structure characteristics of nuclear grades graphite of IG-110,NBG-18 and NG-CT-10,and permeability simulation through geometries are performed.The porosity,number of pores and throats,coordination number and pore surface are obtained.NGCT-10 is of similar microstructure to IG-110,but differs significantly from NBG-18.The absolute permeabilities of IG-110,NG-CT-10 and NBG-18 are 0.064,0.090 and0.106 mD,respectively.This study provides basis for future research on graphite infiltration experiment.     

Thin film composite sodium alginate membranes for dehydration of acetic acid and isobutanol

Dehydration of widely used organic solvents such as acetic acid (AA) and isobutanol (IB) is challenging tasks, which form close boiling mixtures with water. Sodium alginate (SA) thin film composite membranes were prepared and crosslinked with 2,4‐toluene diisocyanate (TDI) and glutaraldehyde for dehydration of IB and AA/water mixtures through pervaporation (PV). The crosslinked and uncrosslinked SA composite membranes were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, and universal testing machine for intermolecular interactions, crystalline nature, thermal stability, surface morphology, and tensile strength, respectively. At a feed composition of 98 wt % IB and 95 wt % AA aqueous solutions, the TDI crosslinked SA composite membrane exhibited separation factors of 3229 and 708 with reasonable fluxes of 0.021 and 0.012 kg m^?2 h^?1, respectively. The results obtained in the study for IB and AA systems were compared with other SA membranes reported in the literature. The membranes appeared to have potential for commercial PV ability to dehydrate the solvents up to desirable purity levels (>99%) and feasibility of preparing them in a composite form which would enable scale‐up into modular configurations. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40018.     

Efficient non-local means denoising for image sequences with dimensionality reduction

The aim of this paper is to improve both accuracy and computational efficiency of non-local means video (NLMV) denoising algorithm. A technique of principal component analysis (PCA) is used to reduce the heavy dimensionality of patches. A pre-processing step of shot boundary detection is used to split the video sequence into different shots having content-wise similar frames. Further PCA is computed globally for these shots. To speed-up the denoising process, weights are computed in reduced subspace. In the proposed method, we modify the original histogram difference (HD) technique such that content-wise similar frames are separated more systematically and accurately. We have achieved improvement with respect to accuracy and computational speed compared to standard NLM. Moreover, qualitative and quantitative comparisons show that the proposed method is consistently superior compared to that of NLM and some of its variants.

     

Quick management of accidental tritium exposure cases

Removal half-life (RHL) of tritium is one of the best means for optimising medical treatment, reduction of committed effective dose (CED) and quick/easy handling of a large group of workers for medical treatment reference. The removal of tritium from the body depends on age, temperature, relative humidity and daily rainfall; so tritium removal rate, its follow-up and proper data analysis and recording are the best techniques for management of accidental acute tritium exposed cases. The decision of referring for medical treatment or medical intervention (MI) would be based on workers' tritium RHL history taken from their bodies at the facilities. The workers with tritium intake up to 1 ALI shall not be considered for medical treatment as it is a derived limit of annual total effective dose. The short-term MI may be considered for tritium intake of 1-10 ALI; however, if the results show intake ≥100 ALI, extended strong medical/therapeutic intervention may be recommended based on the severity of exposure for maximum CED reduction requirements and annual total effective dose limit. The methodology is very useful for pressurized heavy water reactors (PHWRs) which are mainly operated by Canada and India and future fusion reactor technologies. Proper management will optimise the cases for medical treatment and enhance public acceptance of nuclear fission and fusion reactor technologies.     

Chemical Composition and Fatty Acid Profile of Khat (Catha edulis) Seed Oil

The proximate, physicochemical, and fatty acid compositions of seed oil extracted from khat (Catha edulis) were determined. The oil, moisture, crude protein, crude fiber, crude carbohydrate, and ash content in seeds were 35.54, 6.63, 24, 1.01, 30.4 %, and 1.32 g/100 g DW respectively. The free fatty acids, peroxide value, saponification value, and iodine value were 2.98 %, 12.65 meq O₂/kg, 190.60 mg KOH/g, and 145 g/100 g oil, respectively. Linolenic acid (C_18:3, 50.80 %) and oleic (C_18:1, 16.96 %) along with palmitic acid (C_16:0, 14.60 %) were the dominant fatty acids. The seed oil of khat can be used in industry for the preparation of liquid soaps and shampoos. Furthermore, high levels of unsaturated fatty acids make it an important source of nutrition especially as an animal product substitute for omega‐3 fatty acids owing to the high content of linolenic acid.     

Flexible epoxy novolac coatings: Use of cardanol‐based flexibilizers

Flexible epoxy novolac coatings were developed by reacting an epoxy novolac resin, poly[(phenylglycidyl ether)‐co‐formaldehyde] (PPGEF) with an amine curing agent, 4,4′‐diamino‐3,3′‐dimethyldicyclohexyl methane (BMCHA), cardanol based reactive diluent (Cardolite NC‐513) and two different cardanol‐based flexibilizers (Cardolite NC‐514 and Cardolite NC‐547). The flexibilizer content was varied from 5 to 10% by weight of the resin. These resins were coated onto the stainless steel panels and tested for their gloss, cross‐hatch adhesion, falling weight impact resistance, flexibility, abrasion, scratch hardness, solvent scrub resistance, and chemical resistance. The thermo‐mechanical properties of these coatings were determined by TGA, DSC, DMTA, and tensile strength measurements. The cryofractured specimens were subjected to SEM analysis. The influence of structural differences of two flexibilizers on the coating properties was investigated. These coatings exhibited excellent properties and have great potential in industrial applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44920.